Automate Copy Paste Range

Nov 30, 2006

I am trying to take a range ("a5:k23") of data in a sheet name Kelly and paste that data at range ("a1") in Sheet4 when the numbers change in cells "(K3") and "(J3") in the Kelly Sheet. When the numbers change, I want this to automatically paste and paste special. Since there are some conditional formats with color, I want to first Paste and then Paste Special the range of data.


Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Range("k3") = 1 And Range("j3") = 10 Then
Range("A5:K23").Select
Selection.Copy
Sheets("Sheet4").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("KELLY ").Select
Range("F2").Select

View 9 Replies


ADVERTISEMENT

Macro To Automate Copy/paste Sequences

Nov 5, 2008

I have a spreadsheet tool that I use to calculate values on a set of variables, based on values on an initial set of other variables, for a large number of cases.

The calculations require a number of sequential steps to be repeated to get the calculated values for each case, and I am hoping there is a straightforward way to use a VB macro to automate this process.

Essentially, these steps are required to calculate values for a single case:
1. A data input sheet holds the values on the initial/input variables for each case. The first step involves copying the string of values for the case on the input variables into a sheet where the calculations are done.

2. As soon as the input string of values are pasted into the calculation sheet, the calculation formulas generate values for the case on the new, output variables.

3. The output variable string is then copied from the calculation sheet into a “results output” sheet. This copy/paste procedure needs to offset from the first row on the output sheet, so that the row number where the values on the output variables are stored correspond to the case ID. For example, case ID 10 is stored 10 rows down from the first row (i.e., on row 11). Case ID 100 is stored 100 rows down from the first row (i.e., on row 101).

As there are a very large number of cases, I need to have a “control panel” in place, where I can indicate the range of case IDs that will be processed. This takes the form of two cells – one indicates “From ID” and the other “To ID” (for example, “From ID” 1 “To ID” 100). The macro then uses this information to loop through the calculation steps outlined above for these case IDs.

View 4 Replies View Related

Copy/Paste Macro (automate Copies To Another Workbook)

May 8, 2007

I'm looking for information on building a macro that will automate making copies of a spreadsheet into another workbook that contains very particular information. My master sheet has lists of my customers and the rep's that service them. What I need to do is have macro buttons for each rep. that will pull all the shops that they service and all information for these shops into another spreadsheet.

View 9 Replies View Related

Automate Cut And Paste?

Feb 2, 2013

Is it possible to set up 2 tables whereby if you change a field in 1 table it automatically cuts and pastes a row of info in to another table. Or possibly by clicking a macro hot button? E.g. An entry in 1 table is no longer 'live' so moves to the 'archived' table when a field is changed.

View 3 Replies View Related

Automate - Paste Object Into Paint And SaveAs

Apr 18, 2009

Is it possible to automate this process using VB?

I have created an object from a cell range and copied it to the Clipboard, is it then possible to then open up Ms Paint and paste the object in, automatically?

I'm trying to create a .Tif file of the object that can be used later on.

Ideally if it could be possible, for Paint to then offer the SaveAs dialog box to show as well, so the user can choose the freferred save location.

View 9 Replies View Related

Sheet1 Row Range Copy To Sheet2 Firs Blank Row In Same Range Paste As Text?

Mar 16, 2013

Trying to assign code to comm. button on User form to copy lets say:

(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)

View 4 Replies View Related

Application.inputbox: Range To Copy And Paste The Range's Link And Format To A Different Sheet

Oct 7, 2009

Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:

View 2 Replies View Related

Copy/Paste Range(s) Without Activating/selecting Range(s)

Oct 2, 2008

To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.

View 5 Replies View Related

Copy Immediate Range, Paste To Another Sheet & Name Pasted Range

Feb 19, 2008

I have been struggling for a while to copy data from one worksheet to another and reset the target range.

The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.

For example, the below code generates an error: "Compile error: Argument not optional"

I have stuck the particular command button script below to let you see what I am trying to do:

Private Sub cmbFilter_Click()

Dim sCriteria As String

On Error Resume Next

View 4 Replies View Related

Copy/Paste Range To Different Size/Shape Range

Mar 3, 2008

I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?

2) Do not run that part of the macro if there is an error?

Thanks so much for reading this long-winded description but the error is a big problem

Private Sub CommandButton1_Click()

Import_Data_Form.Hide

Run "UnProtectAll"

Set b = Selection
ad = b.Address

' Local Variables
Dim wkbDataFile As Workbook

View 4 Replies View Related

Alternative To Copy Range Paste Range?

Feb 24, 2013

im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.

I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.

I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.

View 3 Replies View Related

Copy A Range And Paste It Over A Variable Range

Jul 16, 2009

I am using the code below to copy a range and paste it over a variable range.

View 4 Replies View Related

Copy And Paste Value Above In Range?

Apr 9, 2014

From E15:E150

Start with E16 and if it is blank than make it the same as the value above (If E16 is blank than E16 would have value of E15)

If it has a value than skip and go to next.... all the way through E150.

So an example would be:

E
15 ABQ
16
17
18 MFE
19 AUS
20
21 HOU
22
23
24
25 ATL
26
and so on

Would look like this after macro

E
15 ABQ
16 ABQ
17 ABQ
18 MFE
19 AUS
20 AUS
21 HOU
22 HOU
23 HOU
24 HOU
25 ATL
26 ATL
and so on

View 5 Replies View Related

Copy And Paste Using Range

Sep 21, 2005

can somone tell me why the attached code will not work it works for the first
range only but when others added it fails also how do you clear outline of
copied cells, i used range ("D9").Select but no good.

-- Private Sub Workbook_Open()
Workbooks("Staff Details").Activate
Range("I4:I10")("C4")("C9")("G9").Select
Selection.Copy
Worksheets("Payslip").Activate
Range("B2:B8", "C11", "K11", "K12").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,
SkipBlanks _
:=False, Transpose:=False

Range("D9").Select
End Sub
BD3

View 10 Replies View Related

Copy Paste In Range

May 8, 2007

I need to paste in sheet2 in rows 8 to 19

Rows 1 to 7 in sheet2 might stay empty.

[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?

Sub CopyBoldCells()
Application.ScreenUpdating = False
Dim rng As Range
Range("A1:A10").Select
For Each rng In Selection
If rng.Font.Bold = True Then
Rows("" & rng.Row & ":" & rng.Row & "").Copy
Sheets("Sheet2").Select
[A20].End(xlUp).Offset(1, 0).Select
ActiveSheet.Paste
Sheets("Sheet1").Select
End If
Next rng
Application.ScreenUpdating = True
End Sub

View 9 Replies View Related

Copy Range :: Cut/paste In The Next Available Row

May 15, 2008

I need some code that will copy cells A20:D20 then cut and paste in then paste in the next available row below (some rows below may be taken)

View 9 Replies View Related

Copy Range And Paste It To Ex Only 30 Rows

Apr 10, 2014

I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.

With this code it copy a range and paste even outside my given paste range.

VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste

View 4 Replies View Related

Copy Range And Paste Using Inputbox?

Apr 25, 2014

I am using below code to copy certain data(Range("C4:R46")) and paste after certain row(After 43 rows) with 50 times

I want to popup a inputbox who asked for how many time u want to paste data, if i choose 4 then paste data after certain row(After 43 rows) with 4 times

If I choose 14 then paste data after certain row(After 43 rows) with 14 times

[Code] .....

View 4 Replies View Related

Copy The Range And Paste To Another Workbook

Sep 25, 2009

i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.

View 2 Replies View Related

Quicker Copy/Paste Range

Dec 16, 2009

I have the following code which copies and pastes a range of cells in a row from one sheet to another if a condition is met:

View 9 Replies View Related

Copy Range And Paste It Into Three Sheets?

Nov 3, 2011

I have a code that copy and paste a productlist into one sheet.

Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?

Code:
Sub CopyProductlists()
'Set **** = Worksheets("Sheet1")
RAnge("B1").Select

[Code]....

View 3 Replies View Related

VBA - Copy And Paste Various Cells NOT In Same Range

Dec 17, 2011

Proficient in Excel, very new to VBA. Up against a deadline on a project that entails consolidating data from 30 + workbooks (each of which has 3-5 worksheets; layout is the same in all worksheets) into one consolidated "rollup" workbook. The inefficient way would be to move all the worksheets into one master workbook, and then link each cell to each worksheet, one-by-one. I found a few threads online with some vba code that has me "close" to what I need to accomplish, but not close enough. The code below will take each worksheet in the workbook and bring back the data in a range of rows and columns. That is not what I need. I only need to bring back SELECT cells of data (i.e. cells E5, H12, J19, etc.) - not everything in that range.

Sub CopyRangeFromMultiWorksheets()
Dim sh As Worksheet
Dim DestSh As Worksheet

[Code].....

View 9 Replies View Related

Copy And Paste Cell Range VBA

Jul 4, 2012

I created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.

Sub copyformulas()
'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID.
Dim lr As Long
For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority")
With Worksheets(SheetName)
lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
.Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr)
End With
end sub

View 2 Replies View Related

Copy-paste A Range 5 Times?

Jul 31, 2012

I have a range A3:E70 where A3:E69 have the same formatting and the text in A70:E70 is bold. I want to copy-paste the entire range a number of times with a for ... next-loop. Actually, it's kind of a template system. I make the template A3:E70 and uses it a number of times.

View 2 Replies View Related

Copy And Paste Macro To Run In Different Range?

Oct 15, 2012

I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.

This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.

Is there an easy way of doing it? Or will I have to write out a new Macro for every row?

View 9 Replies View Related

Copy Paste To All Cells In Range

May 8, 2013

How can I copy cell B13 and paste it to all the cells in range H13:Q34?

View 2 Replies View Related

Copy/paste A Found Range

Aug 3, 2009

I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.


For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search

For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do

Rng.Copy NewSh.range("d1000000").End(xlUp).Offset(1,0)

Set Rng = .FindNext(Rng)
Loop While Not Rng Is Nothing And Rng.Address FirstAddress
End If
Next I
End With
Next sh

View 9 Replies View Related

Macros That Copy And Paste Certain Range

Aug 18, 2009

I need a macros that can start of with this:

Sheet1

DEFGH50123DAMAGE6
ABCD7
ABCD8
ABCD9
ABC
10
ABC
11
AB
D12
ABCD13..........

View 9 Replies View Related

Copy And Paste Dynamic Range

Feb 14, 2007

i have a range in a worksheet called "worksheet1" i need to copy and paste this into a workbook called "princiapl.xls. the range is dynamic but columns are always the same from A1 to G1 however the rows will change how do i copy and paste this into the other workbook

View 4 Replies View Related

Copy Range & Paste As Values

Jun 29, 2007

I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID
DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES
DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved