I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.
For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search
For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do
I have a spreadsheet (range A1:P5000). B2:B5000 would contain cheque numbers. Many of the cheque numbers would be repeated and would have common data in columns C, D, E, F, G, H, L and N.
I am trying to get VB code to copy and paste the common data when a user enters a cheque number.
For example:
When a user enters a cheque number in B3, VB would check B2 for a match. If a match is found, then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C3, D3, E3, F3, G3, H3, L3 and N3. If no match is found, then the user would have to manually enter the data in C3, D3, E3, F3, G3, H3, L3 and N3.
When a user enters a cheque number in B4, VB would check the B2:B3 for a match. If a match is found (in B2 – for example), then VB would copy C2, D2, E2, F2, G2, H2, L2 and N2 and paste them in C4, D4, E4, F4, G4, H4, L4 and N4. If no match is found, then the user would have to manually enter the data in C4, D4, E4, F4, G4, H4, L4 and N4.
When a user enters a cheque number in B100, VB would check the B2:B99 for a match. If a match is found (in B90 – for example), then VB would copy C90, D90, E90, F90, G90, H90, L90 and N90 and paste them in C100, D100, E100, F100, G100, H100, L100 and N100. If no match is found, then the user would have to manually enter the data in C100, D100, E100, F100, G100, H100, L100 and N100.
I have 10 worksheets in my workbook. The two that I'm concerned with in this post are "Main" and "Completed". If Column AA in "Main" contains the word "Complete" (which is from a drop down list) I want to copy the entire row from "Main" and paste in the "Complete" sheet without over-writting previous pasted rows.
Back in sheet "Main" I want the data in that row to be cleared with the exception of Column A as it contains a formula for sorting blanks. If I delete that row it will mess up my links on other sheets.
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp() ' ' EmployeeExp Macro ' Macro recorded 12/02/2008 by eugene.cross ' Dim i As Integer Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this A B C ... ... ...
X 100 115 ... ... ... up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK() Dim LR As Long, i As Long LR = Range("A" & Rows.Count).End(xlUp).Row For i = 1 To LR If Range("A" & i).Value = "9000" Then Range("A" & Rows.Count).Offset(0, 1).Select Do While Not IsEmpty(ActiveCell) ActiveCell.Offset(0, 1).Select Loop Exit For End If Next i End Sub
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to: 1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
can somone tell me why the attached code will not work it works for the first range only but when others added it fails also how do you clear outline of copied cells, i used range ("D9").Select but no good.
[A20].End(xlUp) takes care of the 19th row .. how can I adjust the range to start at row 8 ?
Sub CopyBoldCells() Application.ScreenUpdating = False Dim rng As Range Range("A1:A10").Select For Each rng In Selection If rng.Font.Bold = True Then Rows("" & rng.Row & ":" & rng.Row & "").Copy Sheets("Sheet2").Select [A20].End(xlUp).Offset(1, 0).Select ActiveSheet.Paste Sheets("Sheet1").Select End If Next rng Application.ScreenUpdating = True End Sub
I am using below code to copy certain data(Range("C4:R46")) and paste after certain row(After 43 rows) with 50 times
I want to popup a inputbox who asked for how many time u want to paste data, if i choose 4 then paste data after certain row(After 43 rows) with 4 times
If I choose 14 then paste data after certain row(After 43 rows) with 14 times
i facing another problem at here and do not know how to write the part of coding. it is pending for 2 weeks. i do not know how to explain so i attach the excel to explain. i hope can get any reply soon.
I have a code that copy and paste a productlist into one sheet.
Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?
Code: Sub CopyProductlists() 'Set **** = Worksheets("Sheet1") RAnge("B1").Select
Proficient in Excel, very new to VBA. Up against a deadline on a project that entails consolidating data from 30 + workbooks (each of which has 3-5 worksheets; layout is the same in all worksheets) into one consolidated "rollup" workbook. The inefficient way would be to move all the worksheets into one master workbook, and then link each cell to each worksheet, one-by-one. I found a few threads online with some vba code that has me "close" to what I need to accomplish, but not close enough. The code below will take each worksheet in the workbook and bring back the data in a range of rows and columns. That is not what I need. I only need to bring back SELECT cells of data (i.e. cells E5, H12, J19, etc.) - not everything in that range.
Sub CopyRangeFromMultiWorksheets() Dim sh As Worksheet Dim DestSh As Worksheet
I created the following code to copy the contents of b6 down. However, I need to modify the code to copy this formula =IF(M6=calculations!$E$34, N(B5)+1,N(B5)) down the range.
Sub copyformulas() 'copy and paste cells with formulas down. Select B6 throubh AH6 and copy the formulas down to the last employee ID. Dim lr As Long For Each SheetName In Array("All employees annualized", "All employee salary", "All employee hourly", "allmaleee", "allfemaleee", "cohort analysis", "minority", "nonminority") With Worksheets(SheetName) lr = .Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row .Range("b6:b").AutoFill Destination:=.Range("b6:b" & lr) End With end sub
I have a range A3:E70 where A3:E69 have the same formatting and the text in A70:E70 is bold. I want to copy-paste the entire range a number of times with a for ... next-loop. Actually, it's kind of a template system. I make the template A3:E70 and uses it a number of times.
I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.
This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.
Is there an easy way of doing it? Or will I have to write out a new Macro for every row?
I am trying to take a range ("a5:k23") of data in a sheet name Kelly and paste that data at range ("a1") in Sheet4 when the numbers change in cells "(K3") and "(J3") in the Kelly Sheet. When the numbers change, I want this to automatically paste and paste special. Since there are some conditional formats with color, I want to first Paste and then Paste Special the range of data.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("k3") = 1 And Range("j3") = 10 Then Range("A5:K23").Select Selection.Copy Sheets("Sheet4").Select Range("A1").Select ActiveSheet.Paste Range("A1").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Sheets("KELLY ").Select Range("F2").Select