I have a code that copy and paste a productlist into one sheet.
Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?
Code:
Sub CopyProductlists()
'Set **** = Worksheets("Sheet1")
RAnge("B1").Select
[Code]....
I am looking for either formula which will allow me to copy data from a workbook with multiple named sheets into a workbook with a single named sheet. For instance workbook 1 has sheets named bob, sue, and tom and there is a workbook 2 which only has sheet bob. I want to copy the range fo data from sheet bob in workbook1 to workbook 2 as long as workbook 2 has sheet bob.
View 2 Replies View RelatedI thought I may of been able to get away with just using a simple macro which I could duplicate to copy all the cells in a column between 2 and 251 and
pasting them to another column on another sheet and it only referencing the available text within the first column, but it would appear to be referencing the
blank cells as well, which is creating errors for another function using this column.
So ideally I would like a macro to copy just the text data from a column within the range (F2:F251) on worksheet "Expansion".
All the cells have formulas in them which create a unique text string from other cells on the same sheet.
Not all the cells within the column will be populated with text strings at the same time, but the rows of text will always start at "F2"
and fill down without blank cells between the list of text strings.
The list of text strings will then be copied over to a different worksheet "AG-1" and pasted into column "A" starting at cell "A2".
This function is then repeated 14 more times for (G2:G251) through to (T2:T251) each pasted to different
worksheets "AG-2" through to "AG-15" respectively, in column "A" starting at "A2".
The first column to be found in the process with a blank cell in the starting row of that column, would deem the process complete. Otherwise continue the
process through to column "T".
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB:
Sub Median_Database()
'This Macro takes the median from each station tab in the current Basin workbook
'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I've got a file with 75 sheets. Each sheet consists of a fairly elaborate header (logo, other design elements, etc.) and columns of data. I'd like to remove each sheet from this "master" file and copy it to its own file. But when I do this, the formatting is all screwed up- the logo and designs are distorted. I tried to adjust the row width and column height to fix it, but it doesn't come out the same (plus it takes forever). Is there a fast and easy way to copy each sheet onto its own file sheet?
View 4 Replies View RelatedI'm trying to copy data from one cell in a newly added sheet (Input) and paste it on other sheets of the same workbook all at the same time.
View 4 Replies View RelatedI wonder whether I'm using the code below to copy data from two 'Source' sheets to one 'Destination'.
[Code] .......
The code does copy and paste the correct inofrmation, but the problem I have is that the data from the latter sheet i.e. "IDEAS Actuals" overwrites the data from the "IDEAS Forecast" sheet.
How I would be able to change this so the data is copied underneath each other.
clear, copy and paste on different sheets
I recorded the following macro :
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....
show what is the right vba syntax to copy the name of a sheet in order to past it in a cell?
View 5 Replies View RelatedI need a Macro to copy a set range from the Active Sheet and Paste Values in the next available row in a named sheet.
View 5 Replies View RelatedI would like to create a formula on sheet 1 and be able to copy and paste it to 20 sheets in the same workbook.
View 2 Replies View RelatedI have a workbook with 100 worksheets.
I need to copy the range a[96]:b[125] from each sheet into one sheet.
i m trying to create a basic edxcel spreadsheet design
Sub Macro2()
Sheets("Draft").Select
Sheets("Draft").Copy After:=Sheets(9)
ActiveSheet.Shapes("Button 81").Select
Selection.Cut
End Sub
where it says sheet 9 i want to change so it copies to the end of my sheets
I want to automate the transferring of specific pieces of data from one spreadsheet into another spreadsheet. There are many project spreadsheets that all feed into a resource plan spreadsheet showing every employee, what projects each of them are on, and how many hours they are spending on each project for the quarter.
Now what I would like to do is to automate this process of feeding the data from the many project spreadsheets into the resource plan spreadsheet. With transferring the specific data from the one to the other. Basically I need it so that excel looks at the project spreadsheet copies the name of the employee and the hours they have worked each week for the quarter and paste It into the big resource plan. What I am finding tricky is knowing how to make it automatically paste into the right area as in copy an employee and paste the details in the same employees cells in the other spreadsheet.
I have a workbook open, and want to copy and paste various items to three different sheets in another workbook.
When it comes to pasting the data however i am getting the error "Run-time error '13': Type Mismatch"
VB:
Sub BR_0153()
Dim Inv As Workbook, BR As Workbook
Dim RR As Worksheet, LH As Worksheet, IP As Worksheet
Dim LastRow As Long
Set Inv = ActiveWorkbook 'sets current workbook as Inv
[Code] .....
I would like Excel to do the following and have no idea how to write the instructions. The function is as follows:
From a general information sheet (sheet #1), XCEL looks at a cell to determine if that cell holds "A" or "B" (will be a word, and choice will be previously fixed by a dropdown menu). It then looks at another cell in the same row to determine if it equals 0 or 1.
If the cell holds A, and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #2 of the same workbook.
If the cell holds B and the other cell holds 0, XCEL copies the row from the general information sheet onto sheet #3 of the same workbook.
After XCEL has copied a row, it inputs a 1 in a final cell of that row so it will not copy that row again.
On sheet #2 and sheet #3, XCEL begins (and copies to) the first open row in column A (by moving there after performing its last copy function or by checking column A until it finds a cell = 0), so that each new copy function begins in an open row.
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
Code:
Sub sheets_merger()
location_path_file1 = Range("location_path_file1")
location_path_file2 = Range("location_path_file2")
file1 = Range("file1")
file2 = Range("file2")
[Code] .......
Below is the exact error message:
HTML Code:
Run-time error '1004':
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste.
* Select a rectangle that's the same size and shape, and then paste.
I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
Sub Macro5()
'' Macro5 Macro
Range("D2:D25").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
[code].....
I have a file that i import into excel as fixed width. this is done with the code i have already written. Now im at the point where i need to "pretty" up the report.
In colum A there are Account numbers.
My goal is to have every row with the same act copied to a new sheet, and have the sheet named after the common value in colum A.
once its done there should be roughly 10 to 15 separate sheets.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies View RelatedCopy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I have this Excel File which has some sheets. All sheets are the same format like this: "I have read-circled the cells of interest"
I want to have a macro that can read the data from all the sheets (regardless of their name) and from the specific cells "red-circled" and copy and paste them into new sheet named "Report" in table format. Like this:
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
View 2 Replies View RelatedI want to copy 4 sheets and paste it in a new workbook and save it.
I have this code recorded
VB:
Sheets(Array("PIV", "Report")).Select
Sheets(Array("PIV", "Report")).Copy
But it don't work?
There's one sheet that has a list of customers (this is updated very frequently). These customers are either New or Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (view list new), and a copy of new customers into a third worksheet (view list existing), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isnt any data in there from the previous time each list was copied in).
Ive given this a go via the record macro function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;