I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.
With this code it copy a range and paste even outside my given paste range.
VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste
I would like it to scan an entire column (column E) for rows of data that fall into a range of numbers chosen by the user (like maybe a list box or combo box in sheet 1) for example a number greater than or equal to 8 but less than or equal to 15 and copy all of the rows and columns of data across the entire sheet that fit the range from sheet 1 to sheet 2. I would like to use a separate list or combo box for the min and max values in which to search as seen in the example sheet 1 attached. I have tried the autofilters, custom filters and macro recorder with no success as it seems the filters do not like ranges of numbers.
View 3 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View RelatedTrying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedTo initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
I am currently working on a bid sheet for my company; the accounting department has new software and they need me to alter my spreadsheet to fit a format that is suitable to import into their system.
I will try to explain this as simple as possible (I have attached an example spreadsheet as well)
Sheet1: Estimate
Sheet2: Cost Code Import Sheet
I need to take the information from Sheet1 and have it converted to fit sheet2 and there are a few issues I'm having:
#1 I need the line items in column B on Sheet1 (B2,B3,B4) referenced on Sheet2 but every 4 rows (E2,E6,E10)
#2 Now that I have 3 blank rows between my line items, I need to reference the cost amounts in cells F2,G2,H2 (sheet1) onto sheet 2 (D3,D4,D5)
so far, I have been changing the reference in every cell, and I have hundreds of line items... I do not think I will maintain what little sanity I have left if I continue doing it this way
I'm currently using the below code to add the formula in each cell. Depending on the number of rows.
It's very slow (Range("aa2").Value returns 1060) which means 1k rows. I was thinking of doing copy and paste to speed up. But I do not want to fill the whole column U (Column 13) with the formula. Is there anyway to set the max to copy to?
like r2:rX
where X is Range("aa2").Value?
Private Sub CommandButton1_Click()
Dim nDb As Integer
intRow = 2
Range("aa2").Value = "=COUNTA(A:A)-1"
nDb = Range("aa2").Value
I have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
I have been trying to set up this macro to copy and paste rows where a tick box is checked. The macro needs to transfer the row A:H over to sheet 2 then insent the data acording to property title either A, B, C etc. into formated tables which then feed into a bar and pie chart. I have tried posting this question up in sections hoping that i could get the bits of code i need and then work out how to do the macro but I have had no luck since my VBA skills are poor. I have attached the file
Private Sub CommandButton1_Click()
Dim lRow As Long, lRow1 As Long, lRow2 As Long
Dim Target As Range
Dim vTemp As Variant
Dim WS2 As Worksheet
Set WS2 = Sheets("Sheet2")
lRow = WS2.UsedRange.Row + WS2.UsedRange.Rows.Count
For Each Target In Range("I1", Cells(Rows.Count, "I").End(xlUp).Address).SpecialCells(xlCellTypeConstants)
vTemp = Target.Value
If VarType(vTemp) = vbBoolean Then
If vTemp = True Then
vTemp = "*"
On Error Resume Next
vTemp = WorksheetFunction.Match(" Total*", Range("A" & Target.Row, "A" & Rows.Count), 0).....................
In column H I have dates from 1/1/2008 to 12/31/2013. What I would like to do is transfer that data to column J, but alternate it every other row and then insert the word Date into the blank cells. For instance J1 would read "Date" and then J2 would read 1/1/2008 J3 would be Date and J4 would be 1/2/2008. I have a large database and I tried to use array formulas and they slow it down to a crawl so I was working with DSUM, but I don't feel like wasting time with adding in Date manually.
View 8 Replies View RelatedI am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies View Relatedim currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
I am trying linking it and this what I am trying to do , need a formula for it.
E.g.
Sheet 1 cell J3= Sheet 2 cell K3
Sheet 1 cell J4= Sheet 2 cell K9
Sheet 1 cell J5= Sheet 2 cell K15
and so on.
Basically on the file below whenever there is data in column "type" I want excel to copy the "name" and "account" next to it. The whole file has about 80,000 rows. Spacing is not always one blank row between accounts. I am using excel 2007.
View 5 Replies View RelatedI would like a macro which will copy range $A$1:$Z$1 and paste it as values into AA1:ZZ1.
Easy enough on the first run; but on the second, copy the same range $A$1:$Z$1 and paste it as values into AA2:ZZ2
third run into AA3:ZZ3, etc.
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedI have a workbook, in which from sheet1, I have to copy first row and paste it in another workbook in sheet1 This I have to do for all the rows present in first workbook. I have written code for one single row, but for all rows,
below is the code :
Option Explicit
Dim wbIP As Workbook
Dim wbJT As Workbook
Dim wbET As Workbook
Dim mypathET As String
Dim mypathJT As String
Dim mypathIP As String
Dim vals As Variant
[Code]...
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
View 9 Replies View Related