In sheet1 create template so new data can be add into sheet2 in new row. I made example with adding Last and First name, Years, datas, job. Cell "Number" should be next row in sheet2 where to add data.
Input template don't need be in one row, it's better to make it in several rows but on sheet2 should put them in one row. Also, in sheet2 datas are not in one row, check there is a column with diference of datas.
I have a worksheet in which i have many sheets(around 150). Each sheet is allocated for a measurement device and has values at least once per day. What i want to do in another Excel worksheet is to take, automatically, the highest value and the medium from each separate measuring device. Now here is the catch: each device has at least one sheet for it`s values. The good thing is that a sheet will only contain measurements from one device.
View 3 Replies View RelatedIs there any way that Tab should automatically jump to next column, after the entry has been made.
I have only one number (one digit) per column. I wish that when I enter the digit the tab should go automatically to next column. And also if it is possible that tab may miss the blank column and go to the next where the entry is to be made.
I have information in columns A (First name),B (Last name), C (Misc), D (misc). Is there a way that someone can enter in new information at the bottom of the list and it will automatically sort by the last name once saved or closed ect.. ? I have people not very familiar with Excel and the keep messing up inserting rows and I don't want them to sort. If they could just enter information at the bottom and save it, then when someone opens it to just view it, it will be in order.
View 6 Replies View RelatedI make hundreds of ads on a daily basis, and to automate the process if possible.
I have attached an example where I'm trying to make the following:
I have an ad and a link:
A1= Nice cars "London"
B2= www.com/"111"
I have a list of hundreds of cities (as the example above "London") and their page number ( as the example above "111"), and I want to be able to paste the cities&page number (in different rows) in a second sheet. Where the value of "city" and the "page number" would be placed in the ad and the pagelink in a new row in the first sheet.
In the Excel file that I have attached you can see in sheet 1&2 "exemple - 1A/1B" as a simple ad and pagelink, in sheet 3&4 you can see "example - 2A/2B" an example of how the output should look like.
example.xlsx
Is it possible that excel can copy a template tab and create a new tab automatically when requested?
I am trying to create a spread sheet to log all spends within the department but need to be able to generate a front sheet for each purchase order request. I have attached the spread sheet and have highlighted what I am trying to create.
I have never used visual basics so am completely in the dark, can excel do this sort of thing?
I'm trying to build a invoice template for my business. Trying to make it as simple to use as possible for my staff to input the data. Currently they will manually type in everything but later on I would like to make the spreadsheet have available drop down boxes for the equipment and it will auto fill the hourly rate in.
Right now my main issue is I have the invoice template the way I would like it, but there are only 5 rows in each category. I would like for it to, once the last row in each category is filled, make a new blank row with the exact formatting of the one above it. Then continue to make blank rows if that subsequent row is filled in as well.
Basically, to better describe what I'm looking for, say I have 15 employees on the job and 10 pieces of equipment. I currently only have 5 rows in each category and would like them to expand out automatically without doing a copy rowinsert. It doesn't matter if the page expands to multiple printable pages as long as it doesn't get jarbled in the process.
I am very new to Excel and not even sure if this is possible. I would also need this to carry on with the .xlsm file so that my other employees can use this invoice template on their laptops.
I attached the invoice template I created so what I'm describing can be better understood.
I have an excel file that I want that a macro that I created in vba will run automatically when I open the file. I know there is an option using the: Private Sub workbook_open(). but I'm probably not using it correctly because it dosen't work.
View 3 Replies View Relatedproblem with Excel and I have no idea how to solve it. Hmm, how do I explain this? Someone is giving me data pulled from a server in an Excel format. I have a column that has a series of entries.
For example:
Blank
Entry 1
Entry 2
Entry 3
Entry 4
Entry 5
However, sometimes there's an entry or two missing. So it'll look like this:
Blank
Entry 1
Entry 2
Entry 4
Entry 5
Is there anyway to tell Excel to say "Hey there's an entry missing here," and have it insert a row with the missing entry value? I do not work in Excel ever but people around here do, in case someone has some advice. I already asked the guy if he could just server me the data formatted correctly, and -- of course -- he can't/won't.
I have attached a spreadsheet, in which I have highlighted the following cells (I2, J2, G31 and I31)
View 7 Replies View RelatedI need to know how toformat my spreadsheet so it will automatically give me a new row when I reach the end of the column instead of having to hit insert row to add one.
View 2 Replies View RelatedI created a form in which I can enter data that is totaled at the end. Is there a possibility that a new row is inserted at the end of the form automatically every time I enter data in the last field?
View 9 Replies View RelatedI am working on an excel to get external data and compare them with the defined value. If the external data reaches the defined value, an alert email will be sent to a user-defined email address.
The question is how or is it possible for me to write a macro to automatically refresh and check the data for every minute or as user defined without pressing any buttons.
I have 100 rows of formulas hidden from row 5 to 105. Is there a way that I can type in a number, say 7, in cell A1 and have 7 of my hidden rows unhide to display the info in only those 7 rows?
Then, is it possible to make this automatic or will I have to actually run the macro everytime I change the value in A1?
how can i automatically add one day to an existing day..
a
1 Monday
in b1 what would be the formula for tuesday..
=a1+1
?
My Workbook contains 12 worksheets and in each Worksheet there is a drop down list. The code for each one is in the worksheet code section where they are Private Subs.
What i want is that once the work book opens it will run the code in each of the work sheets instead of going into each bit of code and running it manually.
I want to be able to enter a value into a cell (within a specified range if necessary) and have it automatically multiply by a set value and overwrite the original entry with the result so making it all happen within one cell.
View 9 Replies View Relatedall the data from the form is successfully placed into the assigned work sheet.
My question is
What is the code i have to Assign so it automatically adds a row down?
right now it adds the info but every time I try and put something new it overrides what was placed before..
I have got a Pivot table with makes and their sales in 2008 and 2009 like this
2008 2009
BMW 100 90
Audi 80 80
Mercedes 200 150
Fiat 80 120
Honda 100 110
Peugeot 70 120
(unfortunatley the formatting is deleted when posting).
I have created a stack column chart.
In that chart I want certain makes to have certain colors like BMW = blue, Audi = yellow, Mercedes = black, Fiat = green, Honda = red and Peugeot = purple
When I update the Pivot with a new month and a make changes position the colors go wrong.
I would like to create a script that fixes the makers to their colors, so that after an update I can just run the script and am done .
Unfortunately I do not really know how to work with VBA (I can just steal macros and modify them a bit to my needs or use the recorder).
I need to create a dynamic workbook that automatically adds new worksheets depending on the number of unique "ID" values in the first column of the data source worksheet.
The column can contain numerous occurences of the same value because the data is shown by reporting period. These "ID" values may not stay consistant from report period to report period. So I need to keep the method of naming as variable as possible.
I've seen other posts on similar subjects but they all talk about hard coding the name into the VB code.
I have a theory of what I want to happen but don't know how to write the code.
I believe I need to first identify the unique values, then create each new sheet, then name each sheet with the unique value.
Below is a sample of the column from which the values are taken:
Sample:
ID Report Period
100 Q1-05
100 Q2-05
100 Q3-05
100 Q4-05
100 Q1-06
200 Q1-05
200 Q2-05
I'm supposed to have this project completed by Friday 6/9/06.
Our company has a delivery schedule, based on Excel 2003, WinXP. Is it possible to set up reminders (for next scheduled deliveries in a future?
View 2 Replies View RelatedI have a work book of 3 sheets . the date in the first sheet are linked with the other 2 sheets , sometimes I have to add a row in the first sheet , within the the the table it contains ,
what I need is : a new raw is being inserted (created) in the other 2 sheets with tha same date I entered in the new row I added in the first sheet . beside the possibility to let me difine where that new row is being inserted in each of those other 2 sheets ( separately).
Client Location Product Cost Sub- total
ABD Here Slurry $125.
ABE There Mud $525. $650.
Where I want to enter the cost and have Excel do the sub-total automatically.
Is there an easy way to do this, remember I am new to all of this? The spread sheet is already 147 entries long and will only grow and I don't want to have to figure out the sub-totals each time.
I have a workbook that contains a sheet where I record income and a sheet where I record expenses.
My goal is is to have the infomation that I record on these sheets automatically be filled in on the next available row on the Bank Account sheet.
I have an example workbook attached. It is color coded with an explanation at the top of the Income sheet.
I am trying to do is have an additional row, or rows entered after after the last available row is filled. I've written a macro that searches for the last data set in a column, and will then copy the row above and insert, then copy the formating and formulas down, but I can only make this work by having the user click on a control button.
I would like to make this macro work automatically when data is enterted into the last row in the quote form. Below is what my current macro looks like:
Sub AddLine()
With ActiveSheet
. Unprotect Password:="*********"
ActiveSheet. Range("m17").End(xlDown).Select
ActiveCell.Offset(1, 0).Select
Selection.EntireRow.Insert
ActiveCell.FillDown
ActiveCell.Offset(-1, 0).Select
Selection.EntireRow.Select
Selection.Copy
ActiveCell.Offset(1, 0).Select
Selection.EntireRow.Select
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
ActiveCell.Offset(1, 0).Select
.Protect Password:="*********"
End With
End Sub
I have a vlookup into a row of cells. Sometimes the new text is so long it has to word wrap. How can I get the ros to expand with out me manually doing each row, and then go back to one line with the data changes.
View 9 Replies View RelatedI have a program that creates a query of data into two different spreadsheets.I wish to create a master page that automatically searches for data in each of two spreadsheets and add them appropriately to the master page.
I get how to do such thing using vlookup to search for data in one spreadsheet, how to do that in two spreadsheet situation.Here is a formula that I am stuck on...
=IF(ISERROR(VLOOKUP(A2,Sheet1!$A$2:$B$3,2,0)),VLOOKUP(A2,Sheet2!$A$2:$B$3,2,0),VLOOKUP(A2,sheet1:$A$2:$B$3,2,0))
We have a worksheet that contains twelve different charts. Once a month, we load data into anotheer worksheet and run a macro and it produces the twelve charts. The problem is that we have to manually update/change the month name in each chart title every time we run the macro to produce the charts. Is there a way to automatically update the month name so that we do not have to manually do it? For example, the current chart title is "xxxxxx - March 2014"....when we run the charts for April, we have to manually change March to April in each of the charts. Can this be done automatically?
View 2 Replies View RelatedI'm currently writing an automatic report to display information about a store and how it compares to its peers. My company works on a National>Region>Area>Store basis so my report lets a user select a store and the excel file brings back all the data for the relevant national, region and area data for comparison. That works fine.
I now want to develop a set of pages which display data for that store compared to other stores in the same area. For example: [URL]
My report brings back all the stores, ranks them by their performance against target and then puts them in a sorted table using vlookups. I then want to put them into the bar chart shown above, with the store selected highlighted with a different colour. In the example above, the Hunslet store is selected so its bar is highlighted.
Is there any way to make the store highlight automatic? I manually set the colours in the example but I don't want the user to have to do that each time. It would be possible to do using a macro, but I try and avoid them where I can since VBA knowledge is extremely limited in my office.
I have named ranges containing the names and lookup codes for the selected store, area and region .
Why a formula would not automatically update? Possible problem is in relation to "<=" component of formulas'.
NOTE: This is not in relation to calculations option being set to 'Manual'.
This problem only effect two cells on my entire workbook and all other cells within the column affected, with the exact same formula, work fine.
The "<=" part of the formula is in relation to a drop down list with values from 1 to 12 and the formula works fine initially when flicking between the dropdown list numbers. But if I save the workbook on dropdown list number 2, the formula no longer works...