I am in need of a formula that will acheive the following
IF A1 = "Entry" then B1 = "Entry"
OR
IF A1 = "Exit" then B2 = "Exit"
ELSE
IF A1 = " " then B2 should be blank.
I tried the following in B1
I have a list of item descriptions for products that are quite long, containing numbers, dashes, letters, and in many cases parentheses.
This is an example of one item description: 029861-ML PR HOLD (20# Banana IQF Sliced Patagonia Label).
On a separate worksheet, I will need to re-enter the full item descriptions for the purposes of tracking associated quantities listed by warehouse (in this case the ML found within the description is the code for the warehouse). Is there a way that when I begin re-typing the description into a new cell, the rest of the description can autopopulate (it is recognized within the list of all descriptions from the original worksheet) for the sake of saving time?
Need to find out how to autopopulate when entering a numerical value to the qty column so that sheet2 gets completed.
Attached File: test run online.xlsx
I have inherited a number of databases in work (running Office 2003). It has quickly become apparant that a vast amount of work is duplicated and so i am trying to cut down the data input and therefore the possible errors.......
I have narrowed most of the work down and now have a major worksheet (is that what you call a complete Excel file) named "master database" and several over minor files....
Currently what i am trying to do is to get one of the minor files to auto populate an area of the master database. I will try to explain it below...
1. Minor database has 2 columns with data i require to auto populate the master database. (1 column (B) is called 'off', the 2nd column (C) is called 'on').
2. A number will be inputed manually into either 'B' only or 'B and C' columns, depending on the criteria of the job..
3. The criteria of the job is dictated by column (Z) where the text 'A' or 'ATL' is inputed
4. The master database i would like to add up the numbers inputed as a total from columns 'off' and 'on' and place them into seperate columns 'E' and 'G' of the master database.
5. IF column (Z) shows 'A' then only column (B) 'off' is to be calculated and put into the master database at column (E)
6. IF column (Z) shows 'ATL' then BOTH columns (B and C) 'on' AND 'off' are to be added together and column (G) populated on the master database.....
To make mattters more complex. An expiry date is shown on the master database at columns (D) and (F).
IF column (E) does not exceed 12 by the expiry date, i would like the cell (D) to turn red
IF column (G) does not exceed 10 by the expiry date, I would like the cell (F) to turn red
I've been working on this for a while unsuccessfully. Any way I can create a simple report that is autopopulated with the data from a schedule. The report worksheet would need to be organized by division and AM/PM. see attached for further explanation. I've tried things like "Index(Match)", but it's too cumbersome and not automated.
View 5 Replies View RelatedI have 2 worksheet in excel, first worksheet called "inventory", and second worksheet called "consumption".
The inventory worksheet is the big list of items that we have in store(ex: apple, mango, grape, orange, carrot, banana etc up to 200 items).
In this worksheet, coloumn A is the item name, and coloumn B is the quantity. in some cases, we dont have all the item in the inventory, for example only 50 items that having the quantity (other items is 0)
In the worksheet "consumption", it also have coloumn A with item's name and coloumn B with quantity.
In Consumption worksheet, i want to create a dropdown list in coloumn A, that automatically only populate the items that we have in the inventory worksheet (50 items) (not showing all items (200 ea) in dropdown list).
I am trying to do some basic VBA in my spreadheet, I just want to create an auto-open statement that inputs then next sequential number in column A1 every time the s/s is opened i.e.1,2,3,4 .....
I am using excel 2007 and my knowledge is very limited. I used a code:
Sub AUTO_OPEN
Range("A1") = Format(Range("A65536"), "YYYYMMDD") & Right(Range("A1"), 3) + 1
End Sub
(the first time you open the file you would need to add the first entry '20021122001)
But this does not work and I get a compile error when run thru debugger.
get other cells in a spreadsheet to populate with the Saturdays of a month based on the date input in another cell.
Example
A1 = October 2014
The following cells would automatically display:
A2 10/04/14
A3 10/11/14
A4 10/18/14
A5 10/25/14
A6 11/01/14
Then if cell A1 is changed to March 2015 the following cells would automatically display:
A2 03/07/15
A3 03/14/15
A4 03/21/15
A5 03/28/15
A6 04/04/15
I can't seem to find a way to get just the Saturdays. +7 doesn't work because Saturday is not always the 7th day of the month.
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedI'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I have a rows of the following.
=IF(H1="","",IF(H1="Fail","1",IF(H1="Pass","2","3")))
=IF(H2="","",IF(H2="Fail","1",IF(H2="Pass","2","3")))
=IF(H3="","",IF(H3="Fail","1",IF(H3="Pass","2","3")))
=IF(H4="","",IF(H4="Fail","1",IF(H4="Pass","2","3")))
=IF(H5="","",IF(H5="Fail","1",IF(H5="Pass","2","3")))
The following are the outputs.
1
2
2
2
1
When I do summation on the output cells, the results returned 0. Do I have to do anything procedure in order to add up values that are generated by If-Else?
3 different condition using IF. See the attachment.
View 2 Replies View RelatedI need to find the last date when a company bought any product from my company.
So i have taken the export from the CRM, now i want if the company name collumn is same take the max function in the date collumn fro that perticular company.
I am attaching the file also with a small example.
Is thre an easy way to set up the following testing conditions:
- if A1=A2=A3= ... =A10, do something?
--
Additional information:
- I'm using Office XP
- I'm using Windows XP
I have 3 columns. Column A contains numbers, column B names and i would need columns C to contains the sum of the numbers of column A if they have the same name in column b. I have made an example to make it easier to understand so here is a printscreen of what column C would need to look like: http://img441.imageshack.us/img441/3417/57644131.jpg
View 5 Replies View RelatedBeen teaching myself VBA and I've gotten stuck, and no matter how I search I can't seem to find an answer...
Trying to set up a condition is vba where if a cell value minus another cell value is greater than a static value (elsewhere in the sheet), then to turn the font green.
Code so far:
Dim Cval As Integer
Cval = Cells(3, 6).Value
FinalRow = Cells(65536, Cval).End(xlUp).Row
For i = 10 To FinalRow
If Cells(i, Cval) - Cells(i, Cval + 1) > R6C5 Then
With Cells
.Font.ColorIndex = 10
.Font.Bold = True
End With
End If
Next i
End Sub
I can't work out the right sintax to get a if condition to work correctly.
I have gotten this to work with conditional format, but if you want to copy/paste elsewhere, it doesn't paste the format result correctly...
Need VBA code to sum total all entries that are in range F7:H70 that are 600.00 or over into a variable called lng1099sTotal. For example:
......F....G.....H...
7..125..610..850
8..900..301..425
9..984..325..600
lng1099sTotal should equal 3,944.00
(610+850+900+984+600).
There are 5 sellers and their sales are captured in an individual sheet for each one. Also there's a general sheet where all the sales from all the sellers can be seen.
Now, each seller receives a commission of 5% for each sale he makes. However, when the sum of all the sales of all the sellers is greater than a predetermined goal (let's say 1000 USD), the commissions change to 7% instead of 5%.
IMPORTANT: The seller only receives 7% of commission from the sales made AFTER the goal was reached, the ones before are paid at 5%.
So I need to be able to split the sales in the end to know which were made before and after the goal was reached, so that the commissions are paid correctly.
I am trying to arrive at the results in the yellow cells without needing the blue cells inbetween.
A sumproduct would be best but the 2nd row of blue cells has an if statement in it.
potential VLOOKUP (or possibly another function)
I have a table with about 14 columns, and need a VLOOKUP based on column A.
The problem is Column A has 2 of each unique ID - but column B is the subtype.
For example
Column A Has names (Bob, Jim, Steve, etc) Column B has Opt in or is blank (if they opt out the cell is blank if they opt in the cell says Opt in)
So essentially it's like a vlookup - as i need to read across the columns based on the name, but i also need to check column B if they have opted in.
formula using if condition. I attach the sample file about my problem.
View 14 Replies View RelatedSee attached the excel for reference : Vlookup with condition.xlsx
I have table A1:E10 , where i enter Internal team transfers "From Team" to " To Team" with Month
Now what i want in Table G1:S15 is that whenever a transfer takes place, for that particular month, tables gets filled up as +1 for "To Team" and -1 for "From Team." Also if there are multiple transfers happening for a particular team in a month then that numbers should sum up.
For your easy understanding, i have filled the table as per my logic explained above.
I would like to create a formula in D7 that calculates the weighted average growth for products (column A) manufactured by Bob (column B). In J5 I've inserted the expected result using a SUMPRODUCT function.
How to create a formula in D7 that will calculate from the data in B6:D6 the same result as in J5. i.e. How do I make the SUMPRODUCT function only consider data in columns C and D when Bob is the manufacturer?
I am creating a IF(... formula, here is what i have so far...
=IF(B3='Max' AND C3='Sell', D3-J17,0)
I have two drop down boxes, one at B3 and one at C3, i want to D3-J17, but only when B3 = Max and C3 = Sell, otherwise 0 (really instead of 0 im gonna add in more formula for the rest of the drop downs, but for arguments sake lets say 0), what do i do?
I'm trying create a Sum(If formula with 2 conditions, but whatever I try doesn't seem to want to cooperate. I want to add up the sum of all invoices according to the country they deal with and the month that they were created in. I've attached a sample file showing what I'm trying to accomplish. Here is how far I've gotten so far: =SUM(IF(Main!$L:$L;B21*Main!$Z:$Z;C20);Main!$H:$H)
I've tried other forms as well but even though this only returns #Value!, at least the formula is accepted.
I want to highlight the row when a condition is met. As by using conditional formating only a single cell will be highlighted.
To
in the attached file,
I had used the condition in column H, when cell contains "BLI" the cell will be highlighted in Green, but I want to highlight the complete row with green color wherever Column H contains "BLI"