I want a macro that looks in range of column M to Column R if there are no consecutive blank cells.
If there is one cell who is no blank,then exit
If there are consecutive blank cells from M to R then a messagebox: One cell must be filled!
This can be done for all the rows in the sheet. (used range).
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
View 2 Replies View RelatedI have the following Macro setup and I would like the macro to run once the Save button is clicked.
Sub LetterCol()
Columns("C:C").Select
Selection.Copy
Range("D1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Columns("D:D").EntireColumn.AutoFit
Range("A1").Select
Application.CutCopyMode = False
Range("D1").Select
ActiveCell.FormulaR1C1 = "Letter Column"
Range("A1").Select
End Sub
I can't close out of my spreadsheet (xlsm). I press on the x in the upper right and nothing happens. I've been using the spreadsheet for a long time, but it just started happening yesterday.
View 2 Replies View RelatedClose worksheet with VBA. Can this be none?
View 2 Replies View RelatedI currently have a vba that when execute, a message box pops up that allows me to name the tab. I'd like to add a line that closes the input box when I press the red ex or when I press cancel. Currently, when I press cancel, another annoying box pops up but ultimately there is no way to close out once it starts. What line should I add to close it when pressing cancel or the red ex and where should I add it? find the code below:
Sub Name_sheet()
Dim ws As Worksheet
Again:
[Code].....
I want adding is a bit of code to save the document. When it saves i want the contents of cells c5 and c7 as the name of the saved document.
So it would be saved as c5 - c7
Sub mike()
'
'
Rows("1:1").Select
Range("B1").Activate
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Cells.Select
Range("B1").Activate
With Selection.Interior
.ColorIndex = 2
.Pattern = xlSolid
End With
Windows("HSBC logo.xls").Activate
ActiveSheet.Shapes("Picture 1").Select
Selection.Copy
Windows("Template1.xls").Activate.........
I have a file with about 30 sheets and a size of 14 meg. When the file is saved by using the save button it seems to save. When the file is closed the Microsoft crash message appears. The changes seem to save and if you choose not to have Excel attempt to repair the file everything seems fine.
The other odd behavior the file has that is if you run a for loop on any tab it takes about 3-4 minutes to run. If you copy the tab to another book and run the same code it runs in 3-4 seconds. Any ideas?
Can I take
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
and do something like this?
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls") Not _
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
I have a userform that I would like with a click of a button to open the workbook and then click the same button to close the workbook after it has been viewed.
I am using Excel 2003 in a Windows XP environment. No other workbooks are open.
I have a macro that runs in Workbook(1). It will determine a list of Excel files that exist in a specified directory. For each file found it will;
1. Open the file ( Workbook(2) )
2. Perform a bunch of stuff
3. Saves the file under a new directory/name.
4. Closes the file opened in step 1.
5. Deletes the file referenced in step 1.
Steps 1 through 3 are working fine. What I am seeing is the files opened in the various step 1’s are not closing and eventually Excel runs out of resources. When I look under the Window menu, I see them all active in the list. I think when I saved the files in step 3, it created a new Workbook in the collection and the indexing at step 4 is hosed, but do not know for sure.
I should be using for effective actions on steps 4 and 5?
Sub RHXLProcess(vRHXLFileName)
On Error GoTo lblRHXLProblem
'Open the file without updating
Workbooks.Open Filename:=vRHXLFileName, UpdateLinks:=0
'Determine the file based information
I found this code and I liked to use it, however it does not close the form.
Private Sub cmdBtMain_Click()
frmMain.Show
frmFenster.Close
End Sub
I have a MS Access db in which I have two delete queries called 'qrySessionsCompleted1' and 'qrySessionsCompleted2'. What VBA code can I use in the BeforeClose event to run these?
View 9 Replies View RelatedI am using the following code to automatically save the workbook when excel is being closed.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close SaveChanges:=True
End Sub
This seems to be working fine (in the respect that when the user closes excel it saves this file without a prompt), the issue i have (and i appreciate it is a small issue) is that excel remains open but without any open workbooks. Is there a way i can amend my code so that excel closes too.
I've been given this before but unfortunately i lost a hard drive so all the codes i was given from folk on here have been lost.
I had one in particular, where it would protect my workbook when closing so when it was reopened the user had to use a password in order to change protected cells. This was because certain colleagues would forget to protect the workbook and left it open to accidental damage.
how to close the instance of excel created by my VBS script.
I run the script to open a workbook run a macro within the workbook and save it. I'd like to also close the workbook and the instance of excel.
If I close the workbook within the end of my macro I get an unknown run time error from my script. If I elect to just save the file and close it within the end of script, the workbook closes but the instance of EXCEL.EXE is still running in task manager.
I want to create a situation where certain conditions have to be met before a workbook is closed. I copied the following from an earlier thread, but cannot seem to get it to work.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If Range("A1").Value <> "x" Then
MsgBox "Pls enter x in A1"
Cancel = True
End If
End Sub
If I use the Auto_Close as shown next, it works except the user gets a prompt to save the file and exit, which I don't want.
Sub Auto_Close()
If Range("A1").Value <> "x" Then
MsgBox "Pls enter x in A1"
End If
End Sub
How can i save and close one workbook in excel with vba code.
View 2 Replies View RelatedWhen i open excel it give an error and it close. My computer up to date about office upgrades. And i try to repair my office but it doesnt solve my problem.
View 7 Replies View RelatedHow would the attached file code be ammended to remove a blank row and then move all remaining rows below up one ?
Example: Open the attached file (Transport Log version 1). If you double-click in cell "X10" (for patient Abe Lincoln), the data for row 10 will be removed and written to Sheet #2. Closing the file and reopening, row 10 is empty with other rows below remaining. The goal is to move the data in rows 11 and 12 (and any subsequent rows that may be entered below those) up one row.
The above method would be an indication to users making subsequent entries to always use the first empty row below all existing data.
Below is the code to open a csv file and paste it in the workbook "ResultFile". When i click on a button, a csv file will open to copy the values and paste it in "Resultfile". Now, i want to close the csv or excel file to be closed once copying has done.
where to put the close file.
[Code] ....
How can I make one workbook close another without saving?
These all work in the immediate window, but not in the
Private Sub Workbook_BeforeClose
I have a macro that opens up a file, copies info from the file then closes it and the macro continues. I don't want the user to have to click on any 'do you want to save changes' prompts.
View 5 Replies View RelatedWhen a user X's (clicks of the X in the titlebar) of a user form, I want to save whatever input has been made to that point and close the application. this is what I tried but it neither saved input nor closed the application
View 2 Replies View RelatedI have the below code in a macro attached to a button. Basically, if i choose yes to the message box at the beginning then the macro copies the all the cells on the sheet 'selections', opens up a new workbook, pastes into here, deletes some unused cells, rows and columns, then sends the sheet as an attachment on an e-mail.
What i also need to do is when i have sent the e-mail, the macro closes the new workbook without saving changes.
I know this is the code to close a workbook
View 5 Replies View Relatedclose the inactive file
I'm using the
I have a workbook that contains 4 macros. This workbook is copied by vb.net application with another name. When I run the macro in the copied worksheet, the Original file/workbook is opened automatically, and it is open until the copied workbook is closed.
My question:
1) Is this normal, when a copied workbook invokes a macro from the original workbook, the original workbook opens?
2) Is it possible to close the original workbook while executing the macro from the copied workbook?
3) Will that affect the macro in the copied workbook?
4) If possible to close the original workbook, kindly help me with the code.
I wrote this code to open an excel file when a button is pushed. I also have another piece of code to close the excel field when another button is pushed. The problem: the code to close the excel only works on my computer. There is no error message, but the file doesn't not close on others' computer. Can you please advise on a solution?
View 7 Replies View RelatedI have several workbooks in a make your day folder categorized under several sub folders. Each workbook has a macro that calls the following macro:
View 2 Replies View Related