Can't Close Out Of Spreadsheet
Dec 15, 2012I can't close out of my spreadsheet (xlsm). I press on the x in the upper right and nothing happens. I've been using the spreadsheet for a long time, but it just started happening yesterday.
View 2 RepliesI can't close out of my spreadsheet (xlsm). I press on the x in the upper right and nothing happens. I've been using the spreadsheet for a long time, but it just started happening yesterday.
View 2 RepliesI have a macro that opens up a file, copies info from the file then closes it and the macro continues. I don't want the user to have to click on any 'do you want to save changes' prompts.
View 5 Replies View RelatedI've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
When I close my worksheet excel asks me if I wish to save the file one last time, if I click 'yes' I would like some more code to be executed and then have the spreadsheet save itself and close definitively, how can this be done using vba?
View 9 Replies View RelatedI am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
View 2 Replies View RelatedWorkbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies View RelatedOften I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies View RelatedIt also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies View RelatedWondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I want a macro that looks in range of column M to Column R if there are no consecutive blank cells.
If there is one cell who is no blank,then exit
If there are consecutive blank cells from M to R then a messagebox: One cell must be filled!
This can be done for all the rows in the sheet. (used range).
I have the following Macro setup and I would like the macro to run once the Save button is clicked.
Sub LetterCol()
Columns("C:C").Select
Selection.Copy
Range("D1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Columns("D:D").EntireColumn.AutoFit
Range("A1").Select
Application.CutCopyMode = False
Range("D1").Select
ActiveCell.FormulaR1C1 = "Letter Column"
Range("A1").Select
End Sub
Close worksheet with VBA. Can this be none?
View 2 Replies View RelatedI currently have a vba that when execute, a message box pops up that allows me to name the tab. I'd like to add a line that closes the input box when I press the red ex or when I press cancel. Currently, when I press cancel, another annoying box pops up but ultimately there is no way to close out once it starts. What line should I add to close it when pressing cancel or the red ex and where should I add it? find the code below:
Sub Name_sheet()
Dim ws As Worksheet
Again:
[Code].....
I want adding is a bit of code to save the document. When it saves i want the contents of cells c5 and c7 as the name of the saved document.
So it would be saved as c5 - c7
Sub mike()
'
'
Rows("1:1").Select
Range("B1").Activate
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Selection.Insert Shift:=xlDown
Cells.Select
Range("B1").Activate
With Selection.Interior
.ColorIndex = 2
.Pattern = xlSolid
End With
Windows("HSBC logo.xls").Activate
ActiveSheet.Shapes("Picture 1").Select
Selection.Copy
Windows("Template1.xls").Activate.........
I have a file with about 30 sheets and a size of 14 meg. When the file is saved by using the save button it seems to save. When the file is closed the Microsoft crash message appears. The changes seem to save and if you choose not to have Excel attempt to repair the file everything seems fine.
The other odd behavior the file has that is if you run a for loop on any tab it takes about 3-4 minutes to run. If you copy the tab to another book and run the same code it runs in 3-4 seconds. Any ideas?
Can I take
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
and do something like this?
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls") Not _
Workbooks.Open ("N:Data ManagementDashboardLOLTickler Codes.xls")
I have a userform that I would like with a click of a button to open the workbook and then click the same button to close the workbook after it has been viewed.
I am using Excel 2003 in a Windows XP environment. No other workbooks are open.
I have a macro that runs in Workbook(1). It will determine a list of Excel files that exist in a specified directory. For each file found it will;
1. Open the file ( Workbook(2) )
2. Perform a bunch of stuff
3. Saves the file under a new directory/name.
4. Closes the file opened in step 1.
5. Deletes the file referenced in step 1.
Steps 1 through 3 are working fine. What I am seeing is the files opened in the various step 1’s are not closing and eventually Excel runs out of resources. When I look under the Window menu, I see them all active in the list. I think when I saved the files in step 3, it created a new Workbook in the collection and the indexing at step 4 is hosed, but do not know for sure.
I should be using for effective actions on steps 4 and 5?
Sub RHXLProcess(vRHXLFileName)
On Error GoTo lblRHXLProblem
'Open the file without updating
Workbooks.Open Filename:=vRHXLFileName, UpdateLinks:=0
'Determine the file based information
I found this code and I liked to use it, however it does not close the form.
Private Sub cmdBtMain_Click()
frmMain.Show
frmFenster.Close
End Sub
I have a MS Access db in which I have two delete queries called 'qrySessionsCompleted1' and 'qrySessionsCompleted2'. What VBA code can I use in the BeforeClose event to run these?
View 9 Replies View RelatedI am using the following code to automatically save the workbook when excel is being closed.
Private Sub Workbook_BeforeClose(Cancel As Boolean)
ActiveWorkbook.Close SaveChanges:=True
End Sub
This seems to be working fine (in the respect that when the user closes excel it saves this file without a prompt), the issue i have (and i appreciate it is a small issue) is that excel remains open but without any open workbooks. Is there a way i can amend my code so that excel closes too.
I've been given this before but unfortunately i lost a hard drive so all the codes i was given from folk on here have been lost.
I had one in particular, where it would protect my workbook when closing so when it was reopened the user had to use a password in order to change protected cells. This was because certain colleagues would forget to protect the workbook and left it open to accidental damage.