Using excel 2003, I have a ss that uses filters and sorting. I can get to the data I want but must reopen the workbook if I want to start over and extract different information. I tried installing this VBA:
Sub CloseMe() Application.OnTime Now + TimeValue("00:00:10"), "OpenMe" ThisWorkbook.Close False End Sub
Sub OpenMe() MsgBox "I'm Back!" End Sub
This is my first time at inserting VBA. Usually I just use keystroke macros. I have set my Excel VB Book options to: Option Explicit double clicked the sheet I was using and under general inserted the code, closed Ctrl+Q, saved workbook. When I reopened and tried to use it all I get is “I'm Back!” nothing else happens. One time it actually ran and reopened but it appeared that the workbook was saved before closing because it was still sorted. What I need is it to completely unsorted as it is when I first open it so I can start over.
i m designing a test for a school and want to add a macro that will be assigned to a button at the end of the test i want the macro to close down the the excel program running and not prompt the user to save the workbook is there a vb code that can do this i have tryed a few but they all come back object not found.
I have a userform1 with 12 text boxes with values/text and on this userform there is a cmdbutton to bring up userform2 to change the values/text of the textboxes on the userform1, it changes all the values/text on all the textboxes on userform1, however I want it to save these changes when the 1st userform closes & then re-opens?? How do I do this??
I am new to EXCEL and wanted to know if you can have excel startup running a macro and also if you can have a macro close a worksheet without saving and without confirmation. I created the basic macro of what I want to do. I just want it to be able to run unattended. Is this possible with EXCEL?
I've got a 'Control Panel' spreadsheet which is all based on UserForms. When a user clicks a particular button, it opens one of many separate 'Regional' sheets which they work in.
When the user closes the 'Regional' sheet, I would like the 'Control Panel' sheets userforms to show again. However I can find no way of doing this as it simply switches back to the 'Control Panel' sheet without loading the forms (as I had to hide the 'Control Panel' useforms to give them access to the 'Regional' sheet).
I have a spreadsheet that contains product images in cells in column A. In the matching cell in column B there are product codes. I would like to be able to "batch/bulk" save these images and label them by the corresponding product.
Is this possible. Or is there a different way around this issue.
When I close my worksheet excel asks me if I wish to save the file one last time, if I click 'yes' I would like some more code to be executed and then have the spreadsheet save itself and close definitively, how can this be done using vba?
I have a workbook that has twenty data sheets. The user presses a button that copies they're specified sheets to a new workbook and prompts them with the SaveAs Dialog. How do I code it so that if they press the CANCEL button on the SaveAs Dialog it closes the created spreadsheet without saving it?
Itâ€™s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer â€˜seeâ€™ the controls, and therefore it thows up errors.
Iâ€™m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isnâ€™t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesnâ€™t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
I have created a form in a worksheet which I have added questions too and then locked all cells except the ones where I want the answers in.
I have then added a button to the bottom of the sheet called "Print and Save". This work sheet is called "form"
On a second sheet called "database", I have all the titles of the questions running from a -> k and nother else.
What I want to happen is the user input the information on "form" into the boxes available. Once they have completed the questions, I want them to be able to click on "Print and Save" so that firstly the page "form" prints, and then for all of the answers to be saved in "database" below the titles for each question.
I have had a play, but just don't know where to start. Also, once there is a row of questions below the titles, I don't want it to overwrite information already there, it needs to go onto the next empty row available.
Attached is my excel file.
You will see in the code that I have the code for printing.. I just found this on the net and it seems to work fine for me.
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
I have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
Often I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
How I can write this so their totals show up in the correct row?
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
It also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
Wondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).