Is it possible to do blinking txt,
Currently in each sheet in my workbook in Cells A3:D3 I have different text bolded in Red, I want this to blink constantly while the workbook is open.
I'm working on setting up a report template for my manager, who is a very visual person. I'm trying to make certain values within the report more noticable by color change and flashing/blinking. I've been looking online for VBE code that causes flashing/blinking cells when cell conditions change. I've attempted using some code I was able to find and tried to manipulate it to fit my needs, however, I have not been able to get it to work.
I'm trying to get the text (not the background color) within a range (i.e.K11:K31) to flash continuously based on the cells value. The cells in question are linked to cells on another workbook which is updated on occasion.
Values may be as follows:
AP
F-Avoidable
F-Unavoidable
P
RC
ON
Cells in the range K11:K31 are linked to a similar cell range on another worksheet (i.e. the formula used is: =IF(Datasource1!K15=0," ",Datasource1!K15) ).
I keep running into with the code I've found are as follows:
1. Due to the values in K11:K31 being the result of a formula, the values/cells are not flashing.
2. The flashing is not continuous (i.e. everything I've found so far has a time limit). I have been able to manipulate the code to extend the amount of time the flashing occurs, but so far I've been unsuccessful in causing it to loop infinitely.
3. All of the code I've found so far causes the background rather than the text to flash (this is a minor issue, more of a preference on my part)..
I have created a spreadsheet some time ago and have been asked to improve on it but I'm rusty with VBA.
I have an automated ordering system that saves each sent order as the date e.g "05-04-2013.xls" but the management team want a graph with the data for the last 4 weeks compared. I have created a seperate workbook called "consumables report.xls" which has a column with the products listed followed by columns "Quantity" and "cost" which is repeated for the 4 weeks of the month.
I want to add a button to prompt the user to choose the saved order e.g "05-04-2013.xls" (all orders saved in same directory) to copy and paste the quantity and cost columns (c8,D69) into "consumables report.xls". I got this to work earlier but it would only paste the formulas and not the values. So I need
A prompt to open workbook
Copy range (c8,d69)
Close work sheet
Paste special .value (c8,D69)
I dont care if it has to open the workbook to copy the data as this will only be used once a month so it dosnt matter how slow the code is.
week 1 week 2 week 3 week 4
Product
quantity
cost
quantity
cost
cost
quantity
cost
1
2
3
4
5
6
7
8
I have Monthly sales sheets that import my cash register data into them. I wanted to set them up to do everything without being there. So I have my task manager open excel at 9:30pm everyday and it runs the macro to import the data into the correct day of the month. Here is the workbook
open macro-
Private Sub Workbook_Open()
Dim dTime As Date
dTime = Time
If dTime >= TimeValue("9:30 PM") And _
dTime < TimeValue("9:40 PM") Then
ImportData
End If
End Sub
This is in my July spreadsheet only. So is there a way to make it know which month spreadsheet to open on the 1st of the month? So come August 1st it will automatically open the August workbook and input the data for the first day? By using the date?
I have built a "Calculator" that requires 6 pieces of information, I'm finding that 2 pieces are consistently overlooked, is there a way to have prompts for completion "blink" to capture attention. (I'm using an If statement to highlight a pointing hand using "B" and wingdings when the selection is not completed).
I have found some code that relies on a macro being activated I would like any effects to be automated while the cell is empty and turn of "blinking" by the formula entering null when a response is entered.
I have a presentation that I open from a short-cut. After the "Welcome Page" is opened, I want to open a second workbook in a new instance of Excel after 4 seconds.
I think that I can open the new instance of excel, but I don't know how to activate the macro after 4 seconds.
I'm sure there is a function someplace for this that can be used in a macro.
Then, after the second Workbook is opened, I want the Welcome Page "Workbook" closed, leaving the second Worbook open.
My Splash screen opens a few seconds after the workbook has loaded. Is there a way to make the workbook open minimzed until the the splash screen closes then open properly? What I trying to say is that only the splash screen is visible until it closes.
View 5 Replies View RelatedI've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
Workbooks.Open Filename:=wb.Path & "/" & ws. Range("B1").Value
If I open them by mimicking the FM, perhaps it will work OK.
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
View 5 Replies View Relatedthis is a relatively straightforward query, would be obliged for any tips on same. I have the following piece of -
View 2 Replies View RelatedCreate a full copy of an open workbook (eg. activeworkbook MyFile.xls) using VBA, with the new copy (eg Book1.xls) open as well ,without having to save a copy first then open it ?
View 9 Replies View RelatedI did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
i am currently working on structural engineering program in excel. i want to know if there is code for a cell to blink the value on it. like for example in cell A1, i want to put a WARNING SIGN for that. i want it to blink so that it can be noticeable. is it possible?
View 9 Replies View RelatedI have an Excel application in which I use the Workbook Open event to show a userform.
This works fine when Excel is not already open, but if another Excel workbook is already open, the Workbook Open event does not work.
how to make an object, e.g. Oval Object to flash a solid yellow & white colour? I can make blinking cells, but not objects.
View 12 Replies View RelatedIve managed to get a rectangle blinking using a do loop. But I need more than one blinking at the same time. Atm when another starts blinking the first stops.
View 2 Replies View RelatedUsing search i found many posts for blinking cells or flashing but i could not adapt any of them to what i need ,and since i dont know much how to, i need to blink an "Over Budget" text in cell O1, if N1 is >7000
View 9 Replies View RelatedI tried to change it to suit my need but it didn't work. I will paste here the first portion of the code that I changed
Private Sub Worksheet_Change(ByVal Target As Range)
'Test the value of the specified cell
If Target.Address = "$A$3" Then
If Target.Value >= 12 Then Call Blinker(Target)
End If
End Sub
I changed it to:
Private Sub Worksheet_Calculate()
Dim R As Range
For Each R In Range("$A$1:$A$10")
If R.Value < "$B$1" Then
Call Blinker
Exit For
End If
Next R
End Sub
As I don't have any formal education in VB editing, I don't even know that this is the correct way of doing it.
The other part of code that goes in standard module is unchanged. But I will post it here just for your ref:
Public Sub Blinker(ByVal rng As Range)
Dim myCounter As Integer
Do Until myCounter = 10
With rng.Interior
If .ColorIndex = 6 Then
.ColorIndex = xlNone
Else
.ColorIndex = 6...................
Just recently Excel crashes about 4 out of 5 times. Any advice to where I should start looking and how to handle this please?
View 7 Replies View RelatedCopy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
When I click a button on a Sheet, Certain data is copied from another sheet and paste in active sheet. While this action is taken place, whole sheet is refreshed and the image and a data is blinking for a second.
Do we have an option to avoid that blinking ?
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
Here's my macro:
Code:
Sub CopyRow()'
'Copies row to new sheet, highlights it, marks column 'A' as copied.
'
Dim cCell As Range
Set cCell = Selection.Cells(1, 1)
Selection.Copy
Sheets("Sheet2").Select
Rows("2:2").Select
[Code] .....
Is it possible to modify it to paste into a different workbook called c:filesDestination.xlsm, instead of the existing workbook (Source.xlsm)? The destination sheet name is the same (Sheet2). It's OK if both workbooks are open at the same time.
I'm trying to figure out a way to find a specific sheet in a workbook that does not contain the macro. Within the macro I have a cell which holds the name of the specific sheet I would like to find but I can't get it to work for some reason...
'Dim officen As Integer
'Dim thiswb As Workbook
officen = Range("A2").Value
Set thiswb = ActiveWorkbook
' Open the Active Info file
Workbooks.Open "C:My DcoumentsActive 20080616.xls", , , , "xxxxxx"
' Dim sourcewb As Workbook
Set sourcewb = Workbooks.Open"Active 20080616.xls"
Sheets("officen").Select
RowCount = ActiveSheet.UsedRange.Rows.Count
Range("B2").Select.............................
is it possible to write vb code to open the workbook, scroll through everysheet? extract the values from each worksheet?
let's just say, I only know the workbook name, but not the sheets of the name inside. So the vb code could scroll through every worksheet without knowing the worksheet name, only the workbook name(workbook.xls)
This is pretty basic I just don't know what command to use. I have a macro that's supposed to copy data from one workbook to another, it works fine but In the macro it open the other workbook then closes it. I would like the macro to not reopen the second workbook if it is already open (since reopening causes it to lose the newly updated info). I think it can be done with a If command but I don't know which tried the following: If workbooks("M:/database") Is Open but of course 'is open' doesn't work, but can anyone tell me what to use instead.
View 2 Replies View RelatedNeed some VB Code to check if a workbook is open or not. Either way, it needs to be opened and made active.
I have tried using some of the answers already on here but not getting anywhere.
Looking for a macro, to run upon opening file, that opens a linked file and if the file is already open does nothing.
View 2 Replies View RelatedI have this code:
Code:
Sub StaffDateFiller()
TodayDate = Worksheets("Program").Range("I8")
StaffName = Worksheets("Program").Range("I9")
[Code]....
Is there a way to either:
A) make this run constantly (as it stands now, the code works as I want it to, but I have to run the code for the operation to take place)
B) perhaps write it somehow using indirect reference (I am not sure how to do this), so that I do not have to constantly have the code look through a bunch of rows.
I simply want to check if an 8-digit value occurs in column 7, and take information from somewhere else and paste it into column 8 and column 9 of the same row.