I have buttons (macros) on top of my worksheets. The sheet might contain more than 1000 rows.
Now, what I want is that the buttons should remain constant on top (floating) horizontally and vertically even when the sheet is scrolled down or right etc.
An example would be Windows | Freeze Panes. But I need an alternative.
I'm creating a user form where the user can enter latitude and longitude in either Deg/Min/Sec format or Decimal Degrees. To go from decimal degrees into Deg/Min/Sec I need to do the following
A=Decimal Degrees (Single)
X=Degrees (Integer)
Y=Minutes (Integer)
Z=Seconds (Single)
X = Integer(A) <-- I need to cast A as an integer or truncate it. Not sure how to do this in VBA. Y = Integer[( A - X ) * 60] <-- Again, needs to be cast as an integer Z = {[( A - X ) * 60] - Y} * 60. I didn't see a native truncate function in Excel and in the past I've always used Left() or Right()
I would like to amend my macro w/ additional code that will allow me to view the value in column A, if a subject is chosen from list from columns D or E. Choosing a singal subject to view from row2,from column,D or E will cause the value in column A to not be seen if the subject does not correspond with the row the value is located. Is there a way to match values from corresponding/matching column values with the rows with values in columnA? And. allow if match found to display/list the value in the first empty cell in column A for match? I would also like the macro to reverse match for column A.
So if a single value is selected in column A for view, then all rows for which the value pertains to will also be shown, instead of just the single row with the value.
Here's an examplary make of the booklet.
I'm trying to delete the buttons on the top of this worksheet, and for some reason am not able to do so.
View 3 Replies View RelatedScript that lists the caption names of all work sheet commandbar buttons, one script to list them on a worksheet and another to list them in a listbox.
View 5 Replies View RelatedI am creating scorecards for our company and ratings are inputted using radio buttons (form control). I have a "clear" macro that clears all fields and radio button values (none is ticket). This macro is called throughout different sheets, as different roles in the company have different KPIs and should be on different sheets. I need a code that detects all radio buttons within a certain sheet and clear their values. I cannot put specific radio button names, as I have a lot.
View 2 Replies View RelatedI have a worksheet that I need to copy and paste to > 50 different sheets in the same workbook. It contains 2 textboxes and 2 buttons - is there a way to do that with VBA?
View 1 Replies View RelatedI'm trying to create a macro that creates new worksheets with buttons on them that have macros attached. I've been able to produce one worksheet with a button and macro, but when the function that copies the code is looped it crashes out of Excel.
I realise that the usual method of doing this would be by templates, but this code will be run on other people's computers so the template wouldn’t exist in the location that i had specified (I think with my limited experience with VBA - Please correct me if I'm wrong). I've also tried to copy the page with the button on, but this takes too long (even with screenupdating = false) as there are many sheets to be created.
This is a stripped down version of the code that I have created for the purpose of this forum. To recap, the function that creates a new page, with button, with macro attached works. It's when it's looped that it crashes out. I've stepped through the program, and it reaches the second message box, then it gives up on life ..........
I am trying to use a For Next loop to loop through several option buttons on a worksheet in order to set the value of each to false. I cannot seem to get the code right.
View 2 Replies View RelatedI've been copying my spreadsheets and all the active controls seem to
work fine except the option buttons. Everytime I click on a button
from my old sheet, the selected option disappears from my new sheet.
Does anyone know why this might be the case?
I tried changing the names of the option buttons and then the names in
the codes but that didn't work and the only thing that seemed to was
when I drew new option buttons and reprogrammed everything.
Is there an easier way around this than having to draw new option
buttons each time?
Is it possible to use a macro to create a new worksheet with a button on it, that has a macro attached to it, that i can send out to people? I've looked at the Template example, but i'm not sure this will work when emailed as i'm unsure whether the template will be sent to them.
View 3 Replies View RelatedCreate a button for protecting the worksheet and a button for unprotecting the worksheet
View 13 Replies View RelatedI have some command buttons on a worksheet that I would like to disable, preferably make not visible, until a specific person logs in. I already have code to display worksheets, or hide them, depending on who is logged in. I would like to just add this code to the end of the login procedure, to make these buttons only visible when that person is logged in.
View 3 Replies View Relatedi create new sheet on button click event using this code
Worksheets.Add before:=Sheets(Sheets.Count)
ActiveSheet.Range("A1").Value = TextBox1.Value
but now i want that when this new sheet will open there will be some labels, textboxes and buttons n etc will be appear on that sheet so how can i display these elements on new sheet dynamically ??
I maintain an excel application for a local theatre group using alot of vba actioned by buttons on worksheets. I regularly email the application back and forth between the treasurer and myself and I have noticed that the process of doing this often seems to result in the buttons losing their reference to the code I've assigned to them.
why this happens (is it a bug?) and how to make the linkage more robust? Can I link the buttons and code using vba so that I could establish all the links when the workbook is open?
I am at it again and maybe I am asking to do something that is not possible. I am trying to build a program that will allow the user some flexibilty down the road if I am no longer here to support my code. I have a workbook that contains several sheets. The sheets are labled by equipment name. The Sheets themselves contain specific data with regards to the equipment. What I want to do is as follows. Populate a user form with command buttons based off of the worksheet names. The reason for this would be if 2 years from now we add a new piece of equipment all the user will have to do is add a sheet in the workbook and the user form would reflect the new sheet with a new button. Like wise if I delete a sheet in the workbook the user form would refelect that change as well.
View 14 Replies View RelatedI'm trying to get a sheet filled in the order of the command buttons selected. It works like:
User clicks command button "A" in Sheet 1.
Macro runs that selects correct info in Sheet 2.
Info gets pasted in Sheet 3.
Repeat and Sheet 3 columns fill to the right with each command button clicked.
My issue is that I'm not sure what command to add in the macro to make it paste in the next available empty column. Right now all I can get it to do is paste over the info already there.
On a worksheet, I have several commandbuttons. For many of the buttons the name in the "name box" is different than the name in the "(name)" field under Properties.
Researching this, I found this on msdn2.microsoft.com:
An ActiveX control on a sheet has two names: the name of the shape that contains the control, which you can see in the Name box when you view the sheet, and the code name for the control, which you can see in the cell to the right of (Name) in the Properties window. When you first add a control to a sheet, the shape name and code name match. However, if you change either the shape name or code name, the other isn't automatically changed to match.
So, in my case, one button has:
In the name box: "CommandButton5"
In the (name) properties field: "RunProcess"
The real problem arises when I'm using code to loop through the objects on the worksheet, and build an array of the object names. I'm trying to match the name of the buttons to their click events. In the code, "btn.name" returns the name found in the "name box". The one that I want is the name in the "(name)" field under properties because this is the one that matches the click event.
How can I determine, in code, what is entered in the "(name)" field for an object?
I am getting the following error when i am clicking a Button on sheet1 which is generating duplicate of sheet1.I am trying to delete the button when duplicate is created..Error is:" run-time error '1004' Unable to get the buttons property of the worksheet class" at this line in code"ActiveSheet.Buttons("CmdHistory").Delete"
View 2 Replies View RelatedI am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
View 2 Replies View RelatedI'm trying to make a macro that creates a button (to run another macro). I'm also trying to make sure this has a specific name, instead of just "Button#". The code I get from recording this is:
View 5 Replies View Relatedmy main project will have about 8 different buttons.
View 5 Replies View Relatedi want to filter the sheets on click of a button .
like in this sheet i want to filter the column E in column E their are many reasons of non delivry of my products i want to find out which department is accountable for how much loss so on click of a button it filters with 2 reasons
RTM department
1)Ko Cannister stock Out
2) Outlet Need fresh stock
Dear sirs,with best regards,i have in attached example file some cells i have protected them by ( tools-protect ) which is the general way for protection,for special purpose i ask you kindly to help me by:
creating a buttons with macros to protect and unprotect the ( cells,columns,rows,and all the sheet) that i need to protect them, when i want to (protect or unprotect) i have to click these buttons.
If possible I would like to create using vba a button at the end of my rows of data allowing a user to copy and insert the row next to the button, i.e. duplicate.
I am using the following code to create the button but am not clear how to link a button to a row or cell. The button would be within a cell in a row at the end of the data.
Range("a2").Offset(rowoffset, 10).Select
ActiveSheet.Buttons.Add ActiveCell.Left, ActiveCell.Top, ActiveCell.Width, ActiveCell.Height
rowoffset increments within a loop and a button is placed at the end of each row of data.
I would also like to know how to name the button.
I created a frame in a spreadsheet I put in 2 options buttons that I called Left the first one and Right the second one. I got 2 cells lets say C10 and G10 in these 2 cells I write the cell number values. When I click on button one or Left, I need the cell C10 be set focussed and write a number e.j 5. However, when click on the second butt to write a number e.j 7, the number in the cell C10 still there, so, what I need is a cero or an empty cell C10, and viceversa. Could you help to write a code for this problem.
View 9 Replies View RelatedI have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
I currently have a sheet (SHEET-A) which pulls in a figure from a cell (CELL-G) in another workbook sheet (SHEET-B), and displays the value in CELL-X.
CELL-X then is used for a series of calculations on SHEET-A.
CELL-Y is adjacent to CELL-X and can have a number entered into it which is then used instead of CELL-X for the calculations on SHEET-A. (It is also incidently displayed over CELL-Gs value in CELL-X)
I would like to have a button next to CELL-Y which upon click alters the value of CELL-G in SHEET-B to that of CELL-Y in SHEETA.