I am working on a data with a range of same customer number but different sales figure. If there any way I can search for a duplicate cusomer number and then summing up the sales? I tried to use vlookup but it only recognise the first reference number. I have attached the excel for your reference.
View 3 RepliesI am doing a vlookup on a cell range where the value I'm trying to lookup (a date) exists, but it's not an actual number in the cell...it's a reference to another cell with that value (somewhere completely different).
So, I'm trying to vlookup(date(1/1/2011),A1:A12,2,false) to get the B column value.
A B
1/1/2011 #
2/1/2011 #
...
12/1/2011 #
However, the A column is not the actual date. It is a reference to another cell somewhere completely different that has the actual date 1/1/2011.
When I do a vlookup trying to find 1/1/2011, it can't see it there unless I overwrite the reference in A1 (for instance) with the actual date.
Can I do a vlookup and keep my cell references?
I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.
View 1 Replies View Relatedgenerally vlookup function gives a value from the right side cell. is it is possible to display a cell from the left side. in the attached excel file i want the numbers against the cell which contains mom.....
View 2 Replies View Relatedi have a vlookup formula that i am using and i have two question
my first is something that i noticed while reading mrexcels book and comparing to what i was told here.
i was refered to use column()+0 instead of what mrexcel says of col(the number)-how many to get the number i want.
now my setup is like this
in a1 i have a sheet named anaheim batting totals in a2-a16 i have week1-week16. now i have my formula that i enter in b2 that uses the reference in a1 to look up in the range in sheet week1( i manually entered the range location.) i then copy paste it down to b17 with the dbl click trick and then manually go into each of those formulas and change week1 to week2 to week 3 etc. i want to be able to reference the A column title(whichever week appears) and the a1 cell in the same vlookup formula. in essence to say lookup a1 in this range ex.a1:l450 in the sheet that is in the corresponding a column,i.e. week1.16 all set the same with the same range. the rest i can figure out, but i would like to have one formula to copy to all cells of my chart.
I'm trying to use the Combobox1.Value as the look up value in my Vlookup formula. This is creating a type mismatch error at the moment.
I've tried both:
HTML ltb1.Text = Application.VLookup(ComboBox1.Value, Sheets("Wk Data").Range("A3:A17"), 2, False)
and
HTML ltb1.value = Application.VLookup(ComboBox1.Value, Sheets("Wk Data").Range("A3:A17"), 2, False)
Will
i am trying to write some code to analyse a weightlifting movement that occurs 3 times. In particular there is a part of the macro where the user will input the start and end time of the movement using input boxes (to only select relevant data).
I want to then use a vlookup function to search for the start and end times in a range (1 column) in the time range and return the cell reference of these so i can select only these values and either create a graph or do more analysis. My code for this particular part so far looks like:
I have a sheet which uses a vlookup to find the data on a large sheet. normally to get the cell reference of the data i would use cell("address",......
However this appears not to work with a vlookup.
I have a worksheet that uses a lot of vlookups and I have to update the filenames and locations quite often. I would like to update a single cell rather than updating every single formula.
However I am getting the #VALUE error when trying this.
Simplified Example:
I have: =VLOOKUP(A3,[Table.xls]Sheet1!$A$1:$B$4,2,FALSE)
I would like to place [Table.xls]Sheet1!$A$1:$B$4 into a cell (D1) for example.
And have my vlookup function as =VLOOKUP(A3,$D$1,2,FALSE)
This way I only have to update D1 when I want to change the filename instead of a whole lot of functions.
I love using vlookup, but what do I do if the value I'm looking up is listed more than once in my array? The default is that it will use the first value found.
I have a spreadsheet with 1000's of commodities and for each commodity the volume is broken out by month. For example, here's the sheet where I'm pulling the data from:
ITEMNOPERIODESTCSTREQQTYACTQTY
RC0202010010.109949140005867316
RC0202010020.109939312004668300
RC0202010030.109958968000
RC0202010040.109941769000
RC0202010050.109919656000
RC0202010060.109941769000
RC0202010070.109949140000
RC0202010080.109951597000
RC0202010090.109951597000
RC0202010100.109951597000
RC0202010110.109973710000
RC0202010120.109956511000
So my vlookup for the RC020 for the december Actual Quantity will default to the 5867316. For for January (period 2), if I do the vlookup it will still take the 5867316 again since its first in line.
So my question is, how do I alter my formula in January so it will vlookup the 2nd RC020 and give me the "4668300"?
I am currently having real problem using the formula below:
=INDEX(Data!C:C,MATCH(B7,Data!A:A))
What i am trying to do with this formula is return the cell address of an item that is in a different sheet.
The reference the for search is in Cell B7 which is a date, it then looks at a different sheet "Data" for this date which is in Column A. It then returns the Cell Reference of Column C of the same row.
Currently it is just returning the value of column C and not the cell reference.
I'm having difficulty referencing named ranges indirectly in a VLOOKUP formula (Excel 2003).
Cell A1 contains a fuel cost.
Cell A2 contains a formula that returns a RangeName.
In Cell A3, I want to enter a VLOOKUP formula that uses the range returned as the result in Cell A2 as the Table_array. In other words: =VLOOKUP($A$1,$A$2,2,FALSE). The result is #NA!.
If I use =VLOOKUP($A$1,INDIRECT($A$2),2,FALSE), I get #REF!.
Among other things, I've also tried =VLOOKUP($A$1,TEXT($A$2,"@"),2,FALSE). No cigar.
Never got this message before with the old excel so i dont know how to resolve. I get this. "Invalid Reference. File conversion can not contain formulas that reference cells beyond a worksheet size of 256 columns(columns IW or higher) or 65536 rows." Im doing a VLookup and when i input the table array it is always invalid when i know it is valid. The spreadsheet im referencing does not have any formulas beyond that range either. Another guy i work with is now getting the same error with the new excel.
View 9 Replies View RelatedI'm using a spreadsheet to assimilate data from a number of different files. Now I need to vlookup on this compiled data, but the vlookup cannot find the value because it is not looking at the value of the data in the cell, but rather the formula. How do I get vlookup to search a column by the value displayed in that cell, rather than the reference to some other file?
View 9 Replies View RelatedI am trying to create a lookup formula where the cell value to match has a formula behind it.
For example: =INDEX(AR7:AR371,MATCH(G28,AE7:AE371,0))
The trouble I'm having is that the value in G28 is derived from a formula and the Index Match formula then gives a #N/A result. If I change the value in G28 (a date) manually, so directly enter a date, the Index Match formula works ok.
Is there any way of getting the Index Match formula to work, or Vlookup would also do although that at the moment that has the same problem with G28 having a formula behind it.
I am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
I have a workbook where one tab contains the data that I am given:
Project-A data1 data2 date1 date2 date3
Project-B data1 data2 date1 date2 date3
Project-C data1 data2 date1 date2 date3
Project-D data1 data2 date1 date2 date3
In another tab, I have a report where a row containd the project name, and I want to find the maximum value of the dates in the ither tab, where my project name matches the project name on the tab data I am given.
So, if I have "Project-C", I need to know the max of the dates in the row for Project-C; but I dont know what row that will be on in the other tab. For info such as 'data1' I have been simply using vlookup using the project name as a key.
See attached a sample from a larger workbook I am working on. What i would like to do is in the Rec tab column G, keep the references from columns L & M as the Table Array and Column Index Number. I have =VLOOKUP(F:F,L:L,M:M,0), I would like to have =VLOOKUP(F:F,whatever tab reference is in column L as table array,whatever number is in column M as index number,0). I have included what I would like the data to look like in coulmn H.
View 2 Replies View RelatedI'm using VLOOKUP to create a Cross Reference tool. CR is my "anchor" page that I'm attempting to tie the remaining worksheets WIT,TEC,COP back to the CR worksheet. I'm able to get VLOOKUP to work on the CR worksheet in columns H & I but unable to get the VLOOKUP to work in column J. The VLOOKUP function is entered but it does not return a value that I know exists in worksheet COP.
View 11 Replies View RelatedSheet 1 contains:
Item Sheet 2
ABC =vlookup(A2,'Sheet 2'!$A:$B,2,false)
Sheet 2 contains:
Item Data
ABC 2
I'm trying to get the vlookup to return the value "2"
Right now, I'm manually entering the tab name in the vlookup function, even though it's contained in cell B1.
The tabs are contained in the same workbook if that matters. Since this workbook is growing rather quickly, this is a painful process and doesn't feel very scalable. Since I'm using a mac, I need to do this with functions vs. macros. Does anybody know how I can reference a cell for the name of a tab in the vlookup function?
I was thinking I could maybe somehow do this with the INDIRECT function but I'm stumped.
How can I do the following....if for example I have the following vlookup;
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, 3, false
How can I change the column index i.e. the 3, to reference to a cell.
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, H1, false
The above example doesn't work but I'm sure something can be done using TEXT or VALUE
In workbook 1, I have summary sheet with columns
A -> SNO
B -> Customer Name
C -> Product Name
D -> MODEL
E -> Quotation Rate
I have to retrieve MODEL & Quotation Rate .
and also having seperate sheet for each customers say X1 , Y1 , Z1 ( so other sheet names as X1, Y1 & Z1)
In X1 sheet , I do have following columns
A-> Product Name ,
b-> Model (as of now limited to 1 per product name)
c -> Rate
Now my request is as follows Based on the Column b value in Summary sheet - i have to goto respective sheet and do vlookup for the respective product name and retrieve model and fill it in Column D. I heard i can use INDIRECT function and Vlookup in this junction .
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.
Changing Ranges, Vlookup(), If() And Sum()
This is the link to the thread where ByTheCringe2 showed me the power of SUMPRODUCT and sorted my problem out. I don't think you'll need it, but I'd rather reference it before Roy reprimands me! lol
I am building on the same topic, though.
Hi All!
I have an investment where the monthly interest is added back to the capital. The next month earns interest on the higher figure and this higher interest is again added onto the capital and the story starts all over at the next month. OK, that's easy to do (Again, I think!).
All works fine UNTIL the end of the Tax year is reached and Tax on the interest earned is payable from the investment as the capital carried forward is reduced by the Tax payable. In the attached file I show how I calculate the interest earned for each following Tax year (which always ends at month 2) using SUMPRODUCT. Sumproduct is used because I never know whether the initial investment is made in month 5, 11, or any other month and by using certain controls (thanks ByTheCringe2!) I can simply total the interest earned in each tax year - the months between month 3 (start) and 2 (end).
On a seperate sheet I calculate the Income Tax payable as follows:
Firstly, I calculate the standard Tax payable on the investor's income from other sources. I then add the taxable portion of the interest to the standard income from other sources and calculate the tax payable on that combined figure. I then deduct the two figures from each other and get the increase in Tax payable because of the interest earned.
This "increase in Tax payable"-figure is then returned to the spreadsheet on which the interest is added onto the capital. See Sheet2! cells O9:O15. The Tax payable for each Tax year is placed next to taxable values I calculate using SUMPRODUCT (again!) in column N9:N15.
VLOOKUP is then used to transfer this Tax payable figure into the calculations (Column K9:K68) as and when required (only when tax is payable) - and should be deducted from the value in (Same row) Column H and that answer should be transferred to next row Column E (Balance at beginning of month) -
BUT it causes CIRCULAR REFERENCE faults and I am absolutely frustrated at not being able to figure out how to sort it out!
Sheet2, Column E9:E69 (See Sheet2!E19 for Comment explanation) in the attached workbook.
I have the following macro which runs vlookups between two sheets in excel. Whenever i add columns to the range the vlookup column reference is not the correct cell. Is their any way I can adjust the macro so that the column number adjusts in the formula when a new column is added??
Sub template()
Range("C7").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE)="""", """",VLOOKUP(C6,'Project master'!B7:BG150,3, FALSE))"
'category
Range("c9").Select
ActiveCell.Formula = "=if(VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE)= """", """",VLOOKUP(C6,'Project master'!B7:BG150,4, FALSE))"
'sub-category
Range("c10").Select...................
I am trying to use VB to vlookup between to workbooks
1. Make active workbook WBK1
2. Make workbook being open WBK2
3. Copy and Paste between WBK1 and WBK2
4. Have a vlookup in WBK1 and bring in the values from WBK2
5. Close WKB2
6. Copy, Paste, and transpose values in wkb1 within wkb1
The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
Example 06.19.14.xlsx
I need to run a vlookup to find some data. But I have a lot of data about 600,000 lines. Currently this list is spread over several columns (as the limit is something like 50000). How can I make my reference range access multiple columns?
View 5 Replies View Relatedin cell A1 I have a ref no. eg aa/01/bb
in cell A2 I have a ref no. eg aa/02/bb
only the middle number increases in the reference each time eg: /01/
is there a formula that can achieve this or am i doomed to manual input, I have made a few attempts but cannot work it out.
I'm wanting some sort of formula to generate a reference number that relates to numbers i put in a cell. i want the end result to look something like this:
Reference number
362 3620001
456 4560001
362 3620002
487 4870001
456 4540002
As you can see id like it to generate a reference number to the number that i input, and also when i input that number twice or three times it picks that up on the reference number also.