2007 - Invalid Reference - VLookup

Dec 11, 2008

Never got this message before with the old excel so i dont know how to resolve. I get this. "Invalid Reference. File conversion can not contain formulas that reference cells beyond a worksheet size of 256 columns(columns IW or higher) or 65536 rows." Im doing a VLookup and when i input the table array it is always invalid when i know it is valid. The spreadsheet im referencing does not have any formulas beyond that range either. Another guy i work with is now getting the same error with the new excel.

View 9 Replies


ADVERTISEMENT

Invalid Reference

Dec 17, 2008

When I insert a row into a worksheet (by selecting the row and then hitting ctrl+plus, or by going through the menu insert, row), a message pops up, as follows:

I created this worksheet from scratch and am not aware of any invalid reference.

View 9 Replies View Related

Invalid Next Control Variable Reference?

May 9, 2014

Why this doesn't work?

I get the error message: Invalid Next control variable reference

And it highlights the i in 'Next i'

[Code] .....

View 3 Replies View Related

Getting Error Invalid Or Unqualified Reference

Jul 14, 2014

I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.

[Code] ....

Which is giving error .

superscript.xlsm‎

View 3 Replies View Related

VBA - Invalid Or Unqualified Reference When Code Run?

Mar 3, 2013

Code:

Sub ProtectAll()

Dim ws As Worksheet

For Each ws In ActiveWorkbook.Worksheets
.Protect Password:="Password", AllowFiltering:=True
.EnableSelection = xlUnlockedCells
End With
End Sub

I am trying to get autofilter to be active when i run my protect macro.

View 3 Replies View Related

Error - Invalid Or Unqualified Reference

Jun 12, 2007

Im getting an "Invalid or unqualified reference" error from this sub.

Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
If ("C5") > ("b5") Then .Select ("C5")
Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End If

End Sub

View 9 Replies View Related

AutoFilterMode Causes Invalid Or Unqualified Reference

Nov 22, 2006

I'm getting the compile error: Invalid or Unqualified reference and it's highlighting the .autofiltermode= part of the code. Now, keeping in mind that I had a LOT of help with this and I'm a complete newbie, is there anything obvious that I may be missing? I have to admit that I really don't know much about the autofilter stuff. That was taken from in here somewhere and I tweaked it and got help with it so once I moved things around it broke!

Private Sub CommandButton1_Click()

Dim strPick As String
Dim LastRow As Long
Dim FstRow As Variant
Dim ws As Worksheet
Dim allshts As Worksheets

On Error Goto ErrorTrap:

Worksheets("General").Range("A2:I65536").ClearContents

For Each ws In allshts
strPick = "Started"
.AutoFilterMode = False
ws.Range("A1:I1").AutoFilter
ws.Range("A1:I1").AutoFilter Field:=5, Criteria1:=strPick
.UsedRange.Offset(1, 0).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Sheets("General").Range("D65536").End(xlUp).Offset(1, -3)
Next

ErrorTrap:

MsgBox ("Error: " & Err.Source)
Resume Next

End Sub

View 5 Replies View Related

Invalid Function When Using Absolute Reference On Another Worksheet.

Jan 14, 2009

I'm creating a chart that will show a running average of a set of values. First column has the values and the second is a running average. Here's my sample data:

55.0
65.5
8732.7
425.5
521.4
8832.5
528.6
826.0
423.6

My formula for the second column is as follows, =AVERAGE($G$1:G1), =AVERAGE($G$1:G2)... and so on.'

My problem is when I try to run the same formula on a different worksheet to put on the current worksheet, I get an error from Excel that the formula is invalid. Here's the formula I use, =AVERAGE('Team Stats'!$A$I1:AI1), =AVERAGE('Team Stats'!$A$I1:AI2), ...

Is this a bug with Excel? Is the format wrong? I've tried just using the function wizard and it tells me that the absolute reference is invalid.

View 4 Replies View Related

Adding Invalid Characters To Cell Reference Names?

Jun 18, 2013

I am currently using cell references to create a depedendent list with data validation. How to make cell references show up with some invalid characters?

For example, one of my cell references is Youngs_Market_Company. However, when pulling up the cell, I want it to be displayed as Young's Market Company.

View 2 Replies View Related

Compile Error / Invalid Next Control Variable Reference

Jul 16, 2013

I have written the following VBA Script but am getting an error message saying -> "Compile Error. Invalid Next control variable reference".

Code:

Sub Form1() 'Change Yes/No
Dim bottomT1 As Integer
bottomT1 = Sheets("Data Sheet").Range("T" & Rows.Count).End(xlUp).Row
Dim bottomP2 As Integer
bottomP2 = Sheets("Follow-Up").Range("P" & Rows.Count).End(xlUp).Row
Dim bottomO2 As Integer
bottomO2 = Sheets("Follow-Up").Range("O" & Rows.Count).End(xlUp).Row

[code].....

View 5 Replies View Related

Pivot Table Refresh Reference Invalid On 1 Networked PC

Apr 30, 2008

I have a very strange problem with a pivot table in Excel 2007. The source data is in a table in another workbook, stored on a shared network drive. We have 7 PCs in our office, and on 6 of them the pivot table refreshes fine. On the other, it always comes up with an error message that the reference is not valid, even if the source workbook is open. This particular PC is connected by a cable, so it can't be a wireless network problem.

All the PCs have got all updates installed, and as far as I can see the Trust Centre settings are the same (the problem PC can run macros from the same folder without problems). The really annoying thing is that the user of the problem PC is the only person who actually needs to refresh the data as part of her job.

View 3 Replies View Related

File With Multiple Charts Always Gives ONE Invalid Reference Error Until Pressing F9

May 22, 2012

I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.

The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.

The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."

One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!

I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!

View 6 Replies View Related

Unable To Edit Links With Workbook Open Because Of Invalid Reference?

May 31, 2013

I'd prefer to edit links with the source workbook open, however I receive this error when I do "A formula in this worksheet contains one or more invalid references." I am able to edit links with the source workbook closed but this takes far too much time to be satisfied with that as the solution. I have used vlookup formulas and the index-match method and they both take about the same amount of time to update. I've separated each worksheet and used the "name manager" add-in and have searched all links for any type of error. I feel like I'm missing something. Is there a way to fix this "invalid reference" error so that I can edit my links with the source workbook open?

View 1 Replies View Related

Excel 2007 :: Formula In Worksheet Contains One Or More Invalid References

Feb 7, 2012

Everytime I save my workbook, I get a dialog box that says:

"A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a vlid path, workbook, range name, and cell reference."

First off, it say's "this" worksheet no matter what worksheet is active.

Usually the culprit is a screwed up name that has a #REF in it somewhere. Not this time. All of the formulas appear to be working fine.

Is there an audit feature that will find the errors for me? (Excel 2007)

View 3 Replies View Related

Excel 2007 :: Data Validation Not Stopping Invalid Input?

Dec 1, 2011

I just have a basic data validation list. I used "List" and checked the right boxes and the file has been working before. Now the same file does not stop the user from typing in anything.

I re-did the same data validation in a new file and it works. Was there something in the file that prevents it from working?

I have Excel 2007. I saved in both xlsx and xlsm formats

View 5 Replies View Related

Excel 2007 :: Convert Absolute Reference Into Relative Reference

Feb 4, 2014

I have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.

Code below.

Sub FAIL()
'
' FAIL Macro
'
'
Sheets("Reformatted").Select
Columns("C:C").Select
Selection.Find(What:="stop", After:=ActiveCell, LookIn:=xlValues, LookAt _

[Code] .......

View 4 Replies View Related

How To Get Circular Reference To Work In 2007

Nov 3, 2009

I have these cells:

http://img194.imageshack.us/img194/427/excelj.jpg

The two center cells are the average of the top, bottom, left, and right cells. Of course the two center cells will therefore reference each other.

I enabled iteration in Excel options but it will not calculate the answer. I am getting a #value error. I checked the cells, the equation is right and they are all numbers.

What am i doing wrong?

See the work book. I had to rewrite everything manually to get it to work (But I have a HUUUGE matrix and rewriting everything will take forever) Please look at the work book and tell me why one group of cells is returning answers and hte other is returning a #value error.

View 14 Replies View Related

Excel 2007 :: Reference Is Not Valid?

Jun 29, 2013

I am using EXCEL 2007. When I refresh the individual pivot tables, I don't get any error. But when I click on Refresh all Pivot, I get a Reference if not valid error. The source for my pivot is referencing to another workbook. Why is there this error and how can I resolve it?

View 4 Replies View Related

Excel 2007 :: How To Change All Reference Cells In Worksheet

Aug 26, 2010

Here is my situation:

I created one worksheet called: Assumptions. In this worksheet I have 6 different columns representing 6 different cases.

I have completed the first case in a different worksheet called: WL. I would like to copy this case/worksheet WL and be able to change all the reference cells used in case#1: WL to case#2: FA. So all the cells used in my Assumptions worksheet were in the B columns for case 1: WL, for case 2: FA they will all be in the C column, same row, different column.

Any quick way to do the changes?

My case #1 worksheet as over 10 000 formulas, I really don't want to change each and every formula.

I was thinking there was a way to highlight ALL the reference cells used in my Assumption worksheet, so I would have had to drag from B to C cells, only 50 cells. But I can't find it.

View 12 Replies View Related

Excel 2007 :: Reference Last Occurrence Of Text String

Feb 8, 2011

I am running EXCEL 2007 on XP. What is the EXCEL cell formula to put in a cell (for example"E5") that will reference the "last" occurrence of a specific text string in column A (For example Chard ) but will show its corresponding column B content (for example its PH number 3.45) regardless of the number of data entries that will be inputted in the future for both column A and B.

A B C D E
1WINEPH
2Chard3.24
3Merlot3.36
4Cab 3.44
5Merlot3.38 xxx
6Chard3.26
7Chard3.45
8Cab 3.41
9 Merlot3.33
10

View 7 Replies View Related

Vlookup-left Reference

Mar 7, 2009

generally vlookup function gives a value from the right side cell. is it is possible to display a cell from the left side. in the attached excel file i want the numbers against the cell which contains mom.....

View 2 Replies View Related

Can Vlookup To Sum Same Reference Number

Feb 3, 2010

I am working on a data with a range of same customer number but different sales figure. If there any way I can search for a duplicate cusomer number and then summing up the sales? I tried to use vlookup but it only recognise the first reference number. I have attached the excel for your reference.

View 3 Replies View Related

Vlookup For Two Reference Points

Mar 31, 2006

i have a vlookup formula that i am using and i have two question

my first is something that i noticed while reading mrexcels book and comparing to what i was told here.
i was refered to use column()+0 instead of what mrexcel says of col(the number)-how many to get the number i want.

now my setup is like this

in a1 i have a sheet named anaheim batting totals in a2-a16 i have week1-week16. now i have my formula that i enter in b2 that uses the reference in a1 to look up in the range in sheet week1( i manually entered the range location.) i then copy paste it down to b17 with the dbl click trick and then manually go into each of those formulas and change week1 to week2 to week 3 etc. i want to be able to reference the A column title(whichever week appears) and the a1 cell in the same vlookup formula. in essence to say lookup a1 in this range ex.a1:l450 in the sheet that is in the corresponding a column,i.e. week1.16 all set the same with the same range. the rest i can figure out, but i would like to have one formula to copy to all cells of my chart.

View 9 Replies View Related

Combobox1 Vlookup Reference

Oct 5, 2009

I'm trying to use the Combobox1.Value as the look up value in my Vlookup formula. This is creating a type mismatch error at the moment.

I've tried both:

HTML ltb1.Text = Application.VLookup(ComboBox1.Value, Sheets("Wk Data").Range("A3:A17"), 2, False)
and

HTML ltb1.value = Application.VLookup(ComboBox1.Value, Sheets("Wk Data").Range("A3:A17"), 2, False)
Will

View 9 Replies View Related

Excel 2007 :: Converting Formula From Absolute To Relative Reference?

Aug 13, 2013

I am migrating a bookkeepping spreadsheet from Quattro v12 (c2001) to Excel 2007 and have hit a stone wall over relative 3-D references.

In this workbook each sheet holds data for one month, and this includes some lagging-12-month calculations -- that is, summing a range on a single cell for the preceding 12 sheets (including this one).

Unexpectedly, this formula:
=ISUM('201206:201305'!M6)

gives absolute references, even though I put in no dollar signs after the sheet names. This means it gives the wrong answer when copied to the next sheet to start a new month.

I can find no reference at all to converting the above formula from absolute to relative reference.

View 5 Replies View Related

Excel 2007 :: Chart Series Reference Lost On Save

Mar 17, 2009

I'm having a problem with named ranges in a chart. I'm using Excel 2007 in Windows XP.

I have a line graph with twenty different series all using dynamic ranges. I created each series individually, typing the name and then the dynamic range I had previously defined. As far as I am aware, Excel demands when writing the reference that you specify which sheet/workbook this named range is from, so, given the scopes of my ranges are all 'workbook', I added the name of the workbook to the references.

e.g.

Series name:
Series1

Series values:
='workbook name'!range1

This seems to work fine, but when I save and then re-open the file, the dynamic ranges no longer work. If I go to Select Data and look at the reference for a series, it has been changed thus:

Series values:
=[0]!range1

View 2 Replies View Related

Excel 2007 :: Not Being Allowed To Input Formula With Reference To Another Workbook

Feb 13, 2012

I am having trouble making any formula references between 2 different workbooks.

For example, I being typing out my VLOOKUP function on 1 sheet, as soon as I get the table argument, I switch over to the other workbook in which the table is, and I no longer have the VLOOPKUP function active.

I am having this problem for any formula in which I am trying to reference this workbook.

I have ensured they are both saved as Excel workbook documents. I am using Excel 2007

View 3 Replies View Related

Excel 2007 :: AutoPopulate Sequential Reference Number Field

Mar 27, 2012

I am trying to do some basic VBA in my spreadheet, I just want to create an auto-open statement that inputs then next sequential number in column A1 every time the s/s is opened i.e.1,2,3,4 .....

I am using excel 2007 and my knowledge is very limited. I used a code:

Sub AUTO_OPEN
Range("A1") = Format(Range("A65536"), "YYYYMMDD") & Right(Range("A1"), 3) + 1
End Sub

(the first time you open the file you would need to add the first entry '20021122001)

But this does not work and I get a compile error when run thru debugger.

View 4 Replies View Related

Excel 2007 :: Pivot Table Calculated Field With Reference

Nov 18, 2012

I have a set of sales data and need to create a run rate which is simply = Total Sales/Selling Day

Selling day changes most days.

I put the calculation into my pivot data but it's summing up, (instead on 12 I get 720) so I changed this to Average so I get the right figure in the Pivot but when I then use this field, it doesn't use the Average amount, it uses the summed figure.

So what I need is Total Sales/X

X = Cell Reference

View 2 Replies View Related

VBA: Vlookup And Return Cell Reference

Nov 11, 2008

i am trying to write some code to analyse a weightlifting movement that occurs 3 times. In particular there is a part of the macro where the user will input the start and end time of the movement using input boxes (to only select relevant data).

I want to then use a vlookup function to search for the start and end times in a range (1 column) in the time range and return the cell reference of these so i can select only these values and either create a graph or do more analysis. My code for this particular part so far looks like:

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved