Can the information in say cell b:1 be based on the information in A:1? Example: If A:1 has the name Fred Smith then I want cell B:1 to say Nurse. Column A will have a drop down list of names and column B will have a list of Nurse, EMT or Paramedic. When someone pick a name from the list the information in column B will automatically be filled in based on the information in column A.
View 7 Replies
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedI need to get the contents of a drop down list to a certain cell. I have figured out that if i highlite the drop down list and put "=A1" in the formula bar that it kinda works. But instead of putting the words in the cell, it puts how many rows down in the drop down box the item selected is.
View 9 Replies View RelatedI am trying to generate a list based on the value of a cell. That list will then be used as the range for a drop-down list. Example: Cell A1 returns a value of 15
A drop-down list displays the values 1 through 15. Cell A1 changes to 20
Drop-down list displays the values 1 through 20. I assume I'll need a two-step macro to accomplish this but I can't figure out the logic to populate the drop-down.
I have ranges that are named Math, Reading, Science. I would like to create a drop down list in validation that chooses the range based on a value in a particular cell.
View 4 Replies View RelatedI'm trying to find a macro that will allow me to enable several drop down lists in the same cell based on the content of another cell. In other words:
If cell A1 is the data entry cell, and the user enters "cat"
Then cell B1 will display a drop down list of previously grouped options: "mouse, bug, bird"
If in cell A1 the user enters "dog"
Then cell B1 will display a different list of previously grouped options: "mole, rabbit, kibble"
The easiest way for me to explain it is to give an example: if the list contains Red,Blue,Green,Yellow. i need a formula for the adjacent cell that inputs £1 if red is chosen, £2 if blue is chosen, £3 if green is chosen, £4 if yellow is chosen
View 2 Replies View RelatedVarious Numbers Will Be in a drop-down List eg:
6718
0820
7141
0821
I need it to Be able to, When I Select '6718' from the drop down Menu
"375 CAN 2lB18 C/F D/COKE" will Appear in the Next Cell.
I have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedI need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies View RelatedI have a drop-down box(K6) When a style is selected I need to have data show up in other drop-down boxes (H3,L3,P3) These selections would only pertain to the selection in K6. They would change when a different style is selected. There are multiple choices in the secondary drop-downs. [IMG][/IMG]
View 9 Replies View RelatedWhat I need to do is create a Drop Down box. When a user makes their selection it gives another drop down box from what they selected. Each choice in the 1st drop down will give a different drop down box in the next field from what they selected in the 1st. I am having troubles getting this to work.
View 3 Replies View RelatedI have a numerical value in cell B2 , and a drop list that contains unit names.
I am looking for VBA to see which unit is selected in the drop list, and then add B2's value to that particular unit's total.
See attached workbook : oz_addition_example.xlsx
I have created a drop down list of various material sizes what I am needing to do is to select a material size from the drop down list and a corresponding value is input into the cell. So on say sheet two (Data Sheet) I have Cell A1 25x25 with Cell B1 100, Cell A2 30x30 with Cell B2 120 and so on. On sheet 1 Cell A1 has my drop down list being the material size ie 25x25, so what I need to happen is if I select 25x25 then Cell B1 is 100 or if I select 30x30 then cell B1 is 120.
View 4 Replies View RelatedOk what I am trying to do is lookup a value in a table (kinda like one below but alot bigger). What I plan on doing is creating a drop down list for the rows that show "A, B, C etc) and then another drop down for (AA, BB, CC etc).
So lets say the 2 drop-down list are set to C and BB
I want to be able to fill another cell with the value -134
I would use If statements but like I said the table would be alot bigger than example. If possible I would rather not use VBA due to work security settings.
a b c
AA-110-110-129
BB-115-115-134
CC-117-133-136
http://home.comcast.net/~unkerjay/CSBG_Sheet.xls
in it, there's a Sheet named:
CSBG Report
which has a drop down list for all possible reports
beginning with "Jan".
There's also a "Totals" sheet which has the corresponding
information for each report totaled in separate columns.
Jan, for instance is totaled in column B.
Feb, is totaled in column C.
And so on.
What I'd like to be able to do, is, depending on
the report selected, to have the information in
the corresponding cells in the "CSBG Reports" Sheet
pulled from the appropriate column in the "Totals" Sheet.
So far, I'm not wrapping my mind around a way to
do this.
I have a dropdown list in my spreadsheet, on the list is Compound, Pay by Check, Internal Transfer, and ACH. I would like a message box to pop up with a message when anything except Compound is selected. The cell is d38.
View 9 Replies View RelatedI am trying to make a drop down list based on the result of a vlookup.
What i want to do is look into a table that has country name, depot station, but i have more than one depot per country so when i look up with vlookup i only get one result back, the table looks like this.
Country Country nameDepot code Depot name 1 GBUnited Kingdom STN Stansted 2 GBUnited Kingdom EDI Edinburgh 3 GB United Kingdom EMA East midlands 4 FR France
GNO Garanoa 5 FR France MRS Marseille
How can i look up GB or United Kingdom and get all the depots listed from that country.
Just wondering if a drop down list can be specific to a selection made in a previous cell. For example in column A the user would select either:
Weekly
Monthly
Other
Then in column B, the drop down list would be conditional upon what was selected in A. So if the user selected 'Weekly' - the drop down list in B would be: Monday, Tuesday, Wednesday, etc. Or if the user selected 'Monthly' in column A's list, the list in column B would be: 1, 2, 3, ......31.
how to get a 2nd drop down box to update the range (Not just use C6:C7)based on selection in 1st drop down box.
Example:
If Fat, Use range from C6:C7
If Skinny, Use range from D6:D7
Note: I tried putting an if statement in the input range for box2 but won't accept it.
My problem is i need to create a drop down box in excell, now i have a list of names,
Name 1
Name 2
Name 3
Name 4..........
I need all thos enames in a drop down list but i think i keep doing things wrong, I am doing it like this,
All names are in cells A23-A33, i have highlighted them and named them (Names) using the name box in the top left corner, i have then gone to Data, Validation, List, Then i have sourced it to "Names" and clicked ok, this is where my problem is. It Makes all the boxes for Name 1 - Name 10 Drop Down Boxes... And when i click on any of them it gives me a list of all the names, when i click on one of the Names that name appears in the drop down box but the original Name dissapears from the box completely!
Name 1
Name 2
Name 3
Name 4
Name 5..................
i have been looking around here and it seems like my problem is similar to many's regarding the vlookup function. to me, what i'm trying to do sounds simple enough, but it can't get it to work. i have a table that has three columns, Item Number, Item Description, and Amount.
Each item has it's own number, a corresponding item description, and ammount (obviously), but there are some repeats. What I want to do it input the Item Description, and have one field automatically pull up the Item number, and the next field, pull up the price. I am using a drop-down list for the Item Descriptions utilizing data validation. here is formula that i have been trying to use that is not working: =VLOOKUP(B2,Sheet1!$A$2:$C$18,1,FALSE). i have attached a trial worksheet that i am using to work things out on.
I'm trying to do is build a form that will allow me to select from a list of options, that links back to a catologue of data so that when i click on the generate button it will pull the data associated to the item selected from the list into a text box in excel. I have attached the form that I have created.
View 4 Replies View RelatedI have created a pricing sensitivity for a list of products. In cell C3, users can select a product (i.e. Apple, Elmo, or Bowl) and based on this selection, a range of Prices and Units are then updated and the Revenue for each price point calculated. A few lines beneath this, I have a little summary table that lists all the products. I'd like for users to be able to enter in the optimal price point for each item and then have the Units and Revenue for that selected price point for that specific product automatically update.
For example, if I select Apple from my drop down list my price choices are $5, $10, $15; units are 100, 85, 70; and revenue are $500, $850, and $1,050 respectively. On the summary table, I would like units 85, revenue $850 to update automatically if I select/input a $10 price. This would happen for all the products so at the end I want to be able to calculate a blended revenue mix given my pricing changes.
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI have a spreadsheet that lists dates in row 6, columns V through BE. We use these dates to log attendance for kids, so under each date there may be one of many symbols, such as "x" if the student was there. I would like to create a list of the dates that meet one of two criteria: either blank or containing "WR". So, let's say column Z is blank and Y has "WR" in it. In column FB I would like a list of all of the dates that were blank or WR, so I would want the dates contained in row 6 for Y and Z. Is there a function that will 1) look for a blank or WR across a row, 2) find the associated date for that blank in row 6, and 3) write the in another column in the form of a list, each date separated by commas? Here is an example of my information. I would like for a function to automatically make the list in column FB for any dates that are blank or contain "WR".
V
W
X
Y
Z
AA
AB
AC
...
FB
[code]....
List of Dates Absent
x
x
x
WR
x
x
x
1/23, 1/24
[code]....
I want a table to display data based on which month i select from a drop-down list, the data is of course extracted from a different table. For example, in my final table( highlighted in yellow), i want to display the revenues, cost of goods sold..etc of April in this table when i choose April from the drop-down list, the data of the entire year is located in another table that i plan to hide, as we only need to review one month.
View 1 Replies View Related
