how to get a 2nd drop down box to update the range (Not just use C6:C7)based on selection in 1st drop down box.
Example:
If Fat, Use range from C6:C7
If Skinny, Use range from D6:D7
Note: I tried putting an if statement in the input range for box2 but won't accept it.
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedI have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.
View 3 Replies View RelatedI have created a pricing sensitivity for a list of products. In cell C3, users can select a product (i.e. Apple, Elmo, or Bowl) and based on this selection, a range of Prices and Units are then updated and the Revenue for each price point calculated. A few lines beneath this, I have a little summary table that lists all the products. I'd like for users to be able to enter in the optimal price point for each item and then have the Units and Revenue for that selected price point for that specific product automatically update.
For example, if I select Apple from my drop down list my price choices are $5, $10, $15; units are 100, 85, 70; and revenue are $500, $850, and $1,050 respectively. On the summary table, I would like units 85, revenue $850 to update automatically if I select/input a $10 price. This would happen for all the products so at the end I want to be able to calculate a blended revenue mix given my pricing changes.
I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
I'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
I have a workbook consisting of 5 sheets.
Sheet 1 is the master sheet, and (among many other columns) it has a series of yes/no columns. The yes/no options are the equivalent of:
"Are you in sheet 2?"
"Are you in sheet 3?"
etc.
When this is the Yes option, I would like the rest of the contents of the row to copy into sheet 2.
These need to remain linked, so if I change stuff in Sheet 1 I would like it to change everywhere.
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedIm a fairly basic VBA user who has just purchased the code for J-Walk's Enhanced Data Form.
On other threads in this forum I have noticed a lot of people asking how to make the contents of one drop-down box dependant on the selection in another. I am trying to do the same thing but with the criteria section of the EDF form.
Is this possible? What does give me hope is that a simple Autofilter - whilst not as aesthetically pleasing, does the job well.
Currently I have columns fixed or assigned to the names of insurance providers/companies.
In each column below the name of the Insurance Company, a combobox containing the plans that company offers. Choose a plan, and the rest of the column is filled in using vlookup.
Now to save space, IE opposed to having 13-15 columns one assigned to each Insurance Company/Provider. I am looking to have only 3-5 columns with a first initial combobox in which one chooses the Name of the Company/Provider, and in turn populate the original combobox and vlookup functionality I already have built in.
Here is an example of what I am working with.
[url]
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14
If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I have attached my problem workbook in explanation, I need help of pulling values from particular data by referencing selection in drop down list via some formula.
I thought about using the SUMPRODUCT and VLOOKUP but couldnt reference the values in drop down list.
is it possible to create a list of parts from a selection in one drop down box
ie
i have 1200 parts with descriptions etc in list . using a drop down box i want to select and create a workto list.
ideally this list would start on another worksheet starting on row 10
is there a way to return a textbox full of information based on a selection from a dropdown box?
View 4 Replies View RelatedOne worksheet will have a library of job elements for assembly process with standard times on it.For example:Pick up a bolt(0.621m),install gasket(0.231m) etc.
The main worksheet will have a dropdown list which will list all the job elements discussed above.It will also have the quantity.So in otherwords,to pick up one bolt the time would be 0.621 minutes.But if anyone picks up 4 bolts the time would be 2.115 minutes,which can be calculated by the formula.So I want to display the job element,qty and the time in three separate rows.This worksheet will also calculate the total time for the assembly of the components which might contain more than thousand job elements.
My question is how do I ensure that picking up any of these job elements will give me the correct time.Is this something that can be done by formulas or anything thats built in excel or I need to run a macro or VBA to run some codes for IF...ELSE....THEN statements.There are too many conditions like If pick up one bolt time is 0.621 minutes,if pick up 4 bolts time is 2.115 minutes or if pick up a gasket time is 0.231 minutes.
Im currently creating a spreadsheet for my work, with common problems and solutions to one of our websites.
When the spreadsheet is opened, the user will click a button depending on what sort of problem he/she is having. In the example attached, if the user clicks on "make payments" a form will appear. This will have a list of problems.
if the user choses problem 1 from the drop down list, then I would like the list of solutions to problem 1(from the MPData sheet) to show in the box below. The same goes for problem 2, problem 3 etc.
http://www.excelforum.com/excel-prog...reedsheet.html . This is the original post.. and the original code was
Quote:
I am trying to make a calendar spreadsheet to enable me to track allowance payments i am due from my company.
This payment is worked out by three conditions - where i am working (7 regions), how many days of the week (4,5,6 or7) and how many hours (<7,8-9 or 10-12)
I have made drop down lists to select each of the values for the three conditions and want to show the total for them
i can total the entire spreadheet for the month up using fairly large "COUNTIF" statements, but i want to be able to show what the exact amount is in each cell not just a complete total.
i.e. i am away for 6 days i get £15 extra, if i am in Europe i get another £50 and if i work 12 hours i get £30.
I want to be able to calculate this total in each cell for that day.
I can send a copy of the spreadsheet i have got at the moment if that will make things clearer than what i have tried to explain.
I have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
I have a dashboard that uses three pivots based off of a single data source. Each of the pivots is designed to work off of their own drop down list.
the first drop down list allows the user to select a lease date. The associated pivot will update with all servers assocated with that lease date.
the second drop down list allows the user to select a server. This list is limited by the lease date selected in the first drop down. The associated pivot will update with the partition information for the server selected in the drop down.
the third drop down list allows the user to select a partition. This list is limited by the server selected in the second drop down. The associated pivot will update with the detailed partition data for the partition selected in the drop down.
All of the above works, the issue is that when a new lease date is selected in the first drop down list, the current entries for the second and third drop down list are still reflecting the old lease date information. When you click the drop down the correct data is there, it is just not automatically populated.
Is there a way that when the user selects a new lease date in drop down one, the first server in the new list is automatically populated in the second drop down as well as the first partition in the third drop down?
How do I change the color of a row, based on the users selection from a drop down box in that row? I have four driving types in my drop down , Towing - Town Driving - All highway - Mixed. I would like each driving type, if selected, to change the color of the entire Row of Data to a different color. I have been able to use conditional formating to change the drop down cell itself, but that is it.
View 1 Replies View RelatedI have a shared worksheet that has many rows of data... but only certain rows are relevant to each specific users. I would like each user to be able to select their name from a drop-down list in order to have all rows that are not important to them be hidden. I can put the name of the user in column 'A' in each row they need to see, but how could I make all rows that do not contain their name in column 'A' hide? In other words, if 'Bill' is selected from a drop-down list, only rows that contain 'Bill' in column 'A' would be seen.
View 9 Replies View RelatedThere's a table with all the raw data in it
camp name
session name
to put in the correct format I am thinking of usinf drop down boxes so that the user can selct the camp name from drop down and based on that the session name can be populated and alos the rest of infomration of that accput in to the specified fields
I have a pricing model I'm working on where the request is to have all of the line/part items in the model, but only display a subset of those items based upon a sub-line chosen by the user by a drop box that includes all sub-lines.
Right now the list of parts is a table that I'm querying that also includes a simple '1' or '0' to indicate whether every part is an element of one or many sub-lines; eg (sorry, sure this won't format right):
Item SubA SubB SubC
210-1010 1 1 0
210-1011 1 0 1
So if choosing SubB in the drop box, I need the autofilter to show the first part, but not the second one. I think I have to do it this way (autofilter) because it will retain all of the parts whether the user is looking at them at this moment or not; they will use this tool to perhaps first price all SubB items, *then* go select SubC and price all of *those* items - and it needs to retain everything they've done, rather than a dynamic query that would lose prior changes and pull in a whole new set of data (if that makes sense).
So.... I need my autofilter to react not to specifically choosing data on the autofilter itself, but to a choice made in the drop box (probably a macro/VB attached to the box that reacts to the linked cell value that results from the choice, but I don't know how to tell it if the linked cell value is '5', go to column 7 (first two are part number and description) in the autofilter and filter on that column.
Attached is the file i am working with. The table spanning from A:AA5:16 contains hours worked per day of the week with respect to the Project chosen from the drop down menus in A7:16. Cells in the range of F,K,O,R,U,X,AA7:16 total those hours worked on a daily basis. The table below should sum the total hours worked per day according to the Project selected in A19 from the drop down menu, with respect to the Project(s) chosen in cell range A7:16. For example, if i am looking for total hours worked Monday on Project RSB i select "RSB" from the drop down menu in cell A19, i want cell F18:19 to be the sum of cells A7 and A9, with respect to the Project selected from cells A7:16. If I select "FRG" from the drop down in cell A19, i want cell F18:19 to reflect the sum of cells F8 and F10.
View 2 Replies View RelatedI am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
I am trying to generate a list based on the value of a cell. That list will then be used as the range for a drop-down list. Example: Cell A1 returns a value of 15
A drop-down list displays the values 1 through 15. Cell A1 changes to 20
Drop-down list displays the values 1 through 20. I assume I'll need a two-step macro to accomplish this but I can't figure out the logic to populate the drop-down.
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies View RelatedI have a number of macro's which correspond to shift numbers 1 - 23
I would like to have a drop down list on the front sheet so that the user can select the number at the end of the shift which activates the corresponding macro