I need VBA code to do the following:
When cell H2 = "Weekly", I need cell I2 to return "50".
When cell H2 = "Bi-weekly", I need cell I2 to return "25".
The value in Column I should change as soon as the value in Column H changes.
NOTE: The value in Column H is chosen from a Data Validation List.
I'm assuming offset is the best option?
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedI have a set of data on excel and would like to make searching for it easier.
I have created a drop down list in cell B4 (say, "Banana", "Apples" and "Orange"). Is there a way that if i select "Banana" in cell B4, excel will automatically go to cell A20 ?
I am attempting to populate a row of several cells on a worksheet using a drop-down list, using data from a seperate worksheet in the same workbook. The worksheet containing the data will be hidden (I do not think that matters in this case). Do I place a VLOOKUP function in the first worksheet cells? see attached sample
DropDownSample.xls
As a follow-up question, as time goes by, the data in the source worksheet will be appended with new items (additional rows of data). As each new item is added, will I need to edit the formulas, or is there a way for Excel to dynamically add the new data? This might be stretching my wish list a bit but I thought I'd ask.
how to get a 2nd drop down box to update the range (Not just use C6:C7)based on selection in 1st drop down box.
Example:
If Fat, Use range from C6:C7
If Skinny, Use range from D6:D7
Note: I tried putting an if statement in the input range for box2 but won't accept it.
I have created a pricing sensitivity for a list of products. In cell C3, users can select a product (i.e. Apple, Elmo, or Bowl) and based on this selection, a range of Prices and Units are then updated and the Revenue for each price point calculated. A few lines beneath this, I have a little summary table that lists all the products. I'd like for users to be able to enter in the optimal price point for each item and then have the Units and Revenue for that selected price point for that specific product automatically update.
For example, if I select Apple from my drop down list my price choices are $5, $10, $15; units are 100, 85, 70; and revenue are $500, $850, and $1,050 respectively. On the summary table, I would like units 85, revenue $850 to update automatically if I select/input a $10 price. This would happen for all the products so at the end I want to be able to calculate a blended revenue mix given my pricing changes.
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedI'm using Excel 2007. I would like to seek some advise on how i may update cells after selecting a month from a drop down list.
i have created a simplified version of what i intend to have. One the 1st tab 'Cash Budget 2009', i have filled up a table with numbers, sorted by months. On the 2nd tab 'Dec09', i would like to create an expense table, to be able to be selected by month. So i have created a drop down list based on the months that are created in the 1st tab.
Upon selection of the month from the drop down list, i would like the cells to display (fetch) the data from the 1st worksheet. It would also be helpful if the name of the 2nd tab can be updated to read as the month that is being selected.
One worksheet will have a library of job elements for assembly process with standard times on it.For example:Pick up a bolt(0.621m),install gasket(0.231m) etc.
The main worksheet will have a dropdown list which will list all the job elements discussed above.It will also have the quantity.So in otherwords,to pick up one bolt the time would be 0.621 minutes.But if anyone picks up 4 bolts the time would be 2.115 minutes,which can be calculated by the formula.So I want to display the job element,qty and the time in three separate rows.This worksheet will also calculate the total time for the assembly of the components which might contain more than thousand job elements.
My question is how do I ensure that picking up any of these job elements will give me the correct time.Is this something that can be done by formulas or anything thats built in excel or I need to run a macro or VBA to run some codes for IF...ELSE....THEN statements.There are too many conditions like If pick up one bolt time is 0.621 minutes,if pick up 4 bolts time is 2.115 minutes or if pick up a gasket time is 0.231 minutes.
I have created a drop down list of various material sizes what I am needing to do is to select a material size from the drop down list and a corresponding value is input into the cell. So on say sheet two (Data Sheet) I have Cell A1 25x25 with Cell B1 100, Cell A2 30x30 with Cell B2 120 and so on. On sheet 1 Cell A1 has my drop down list being the material size ie 25x25, so what I need to happen is if I select 25x25 then Cell B1 is 100 or if I select 30x30 then cell B1 is 120.
View 4 Replies View RelatedI have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
Im a fairly basic VBA user who has just purchased the code for J-Walk's Enhanced Data Form.
On other threads in this forum I have noticed a lot of people asking how to make the contents of one drop-down box dependant on the selection in another. I am trying to do the same thing but with the criteria section of the EDF form.
Is this possible? What does give me hope is that a simple Autofilter - whilst not as aesthetically pleasing, does the job well.
Currently I have columns fixed or assigned to the names of insurance providers/companies.
In each column below the name of the Insurance Company, a combobox containing the plans that company offers. Choose a plan, and the rest of the column is filled in using vlookup.
Now to save space, IE opposed to having 13-15 columns one assigned to each Insurance Company/Provider. I am looking to have only 3-5 columns with a first initial combobox in which one chooses the Name of the Company/Provider, and in turn populate the original combobox and vlookup functionality I already have built in.
Here is an example of what I am working with.
[url]
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14
If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
I am trying to generate a list based on the value of a cell. That list will then be used as the range for a drop-down list. Example: Cell A1 returns a value of 15
A drop-down list displays the values 1 through 15. Cell A1 changes to 20
Drop-down list displays the values 1 through 20. I assume I'll need a two-step macro to accomplish this but I can't figure out the logic to populate the drop-down.
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies View RelatedBasicly I used conditional formatting and lots of "IF".My solution lacks in style and it's time consuming ..
Long story short: I need to modify the way some cells are displayed based on the selection in a specific dropdown list.
I need that whenI select Task3 from the dropdown list next to "step1: please select" , everything from row 15 to row21 (both 15 & 21 rows included) and from row 23 on, to disappear.
I have attached my problem workbook in explanation, I need help of pulling values from particular data by referencing selection in drop down list via some formula.
I thought about using the SUMPRODUCT and VLOOKUP but couldnt reference the values in drop down list.
is it possible to create a list of parts from a selection in one drop down box
ie
i have 1200 parts with descriptions etc in list . using a drop down box i want to select and create a workto list.
ideally this list would start on another worksheet starting on row 10
is there a way to return a textbox full of information based on a selection from a dropdown box?
View 4 Replies View RelatedIm currently creating a spreadsheet for my work, with common problems and solutions to one of our websites.
When the spreadsheet is opened, the user will click a button depending on what sort of problem he/she is having. In the example attached, if the user clicks on "make payments" a form will appear. This will have a list of problems.
if the user choses problem 1 from the drop down list, then I would like the list of solutions to problem 1(from the MPData sheet) to show in the box below. The same goes for problem 2, problem 3 etc.
I have ranges that are named Math, Reading, Science. I would like to create a drop down list in validation that chooses the range based on a value in a particular cell.
View 4 Replies View RelatedCan the information in say cell b:1 be based on the information in A:1? Example: If A:1 has the name Fred Smith then I want cell B:1 to say Nurse. Column A will have a drop down list of names and column B will have a list of Nurse, EMT or Paramedic. When someone pick a name from the list the information in column B will automatically be filled in based on the information in column A.
View 7 Replies View RelatedI'm trying to find a macro that will allow me to enable several drop down lists in the same cell based on the content of another cell. In other words:
If cell A1 is the data entry cell, and the user enters "cat"
Then cell B1 will display a drop down list of previously grouped options: "mouse, bug, bird"
If in cell A1 the user enters "dog"
Then cell B1 will display a different list of previously grouped options: "mole, rabbit, kibble"
The easiest way for me to explain it is to give an example: if the list contains Red,Blue,Green,Yellow. i need a formula for the adjacent cell that inputs £1 if red is chosen, £2 if blue is chosen, £3 if green is chosen, £4 if yellow is chosen
View 2 Replies View RelatedVarious Numbers Will Be in a drop-down List eg:
6718
0820
7141
0821
I need it to Be able to, When I Select '6718' from the drop down Menu
"375 CAN 2lB18 C/F D/COKE" will Appear in the Next Cell.
I am trying to use combo box to display my data, here are the details. I am having 20 Departments, and have Budget and Actual values for those Departments for each month for the year 2008, tell me the logic to use combo box as dropdown list for Dept. and how can i get values in first 5 to 10 rows after changing the Department in Dropdown list(Combo Box)
View 5 Replies View RelatedI am trying to make a calendar spreadsheet to enable me to track allowance payments i am due from my company.
This payment is worked out by three conditions - where i am working (7 regions), how many days of the week (4,5,6 or7) and how many hours (<7,8-9 or 10-12)
I have made drop down lists to select each of the values for the three conditions and want to show the total for them
i can total the entire spreadheet for the month up using fairly large "COUNTIF" statements, but i want to be able to show what the exact amount is in each cell not just a complete total.
i.e. i am away for 6 days i get £15 extra, if i am in Europe i get another £50 and if i work 12 hours i get £30.
I want to be able to calculate this total in each cell for that day.
I can send a copy of the spreadsheet i have got at the moment if that will make things clearer than what i have tried to explain.
I have a dashboard that uses three pivots based off of a single data source. Each of the pivots is designed to work off of their own drop down list.
the first drop down list allows the user to select a lease date. The associated pivot will update with all servers assocated with that lease date.
the second drop down list allows the user to select a server. This list is limited by the lease date selected in the first drop down. The associated pivot will update with the partition information for the server selected in the drop down.
the third drop down list allows the user to select a partition. This list is limited by the server selected in the second drop down. The associated pivot will update with the detailed partition data for the partition selected in the drop down.
All of the above works, the issue is that when a new lease date is selected in the first drop down list, the current entries for the second and third drop down list are still reflecting the old lease date information. When you click the drop down the correct data is there, it is just not automatically populated.
Is there a way that when the user selects a new lease date in drop down one, the first server in the new list is automatically populated in the second drop down as well as the first partition in the third drop down?