i have this code which looks in a folder and moves all .csv files from folder into workbook. The code uses an Array.
If the code does not find a file in the folder (from the array) it returns an error. How can i modify this so that (if a file is not found from the array) then the code still continues without generating errors?
This is the ....
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is:
Box Name Box Date ID1 ID2 ID3 ....
Where there is not a fixed number of IDs in each box
(There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
I have a list of ID Numbers and Dates. Let's call this "List 1".
I also have a second list "List 2" which also contains a list of ID Numbers and Dates as well as a third column for Rating.
I am trying to extract the Rating for each ID Number from List 2 and display in List 1. The problem is that the Rating can change with time, so List 2 contains several different Date and Rating values for the same ID Number.
What I need to do is lookup the ID Number from List 1 and return from List 2, for that ID Number, the Rating at the closest date prior to the date for that ID Number in List 1. Example below:
List 1
List 2
ID Number
Date
Rating
111
17/04/13
5
[Code] ..........
I have a workbook with data tabs (one shown here) and a summary tab. Essentially, one inputs hours for people in the Data tab (Tech) that are then calculated/summed to total $ based on rates I have hidden elsewhere in the workbook (not included). I'm trying to bring the subtotal lines (highlighted green) into the Summary tab based on which subtotal and what month/year it is. My formula works fine, except for the fact that it is returning a #Value! due to the "Hrs" heading for each Phase. I don't know why it's doing this because I've not run into sum array issues when mixing numbers and letters before. The error formula is highlighted in yellow in my attached sample, but below is a copy of the formula.
View 10 Replies View RelatedI need to convert about 10,000 lotus files to excel files and strip them of any formulas. What I currently have is the part of the macro that will loop through the worksheets (theres about 20 worksheets per workbook) and strip the formulas while leaving the data in tact.
What I need is to learn how to write a loop that will search through folders for Lotus (wk4) files, open them one at a time, run my macro, save them as excel workbooks to a different folder. While suppressing a pretty healthy number of error messages when open and saving the files. Including an update/don't update pop up when opening some of them. I don't want to update.
The looping files and opening lotus is the most important part to me.
My code works well if the worksheet name is Sheet1. It will change constantly. I have alot of other similar workbooks that are not affected and cannot figure this out. Here is the code that I get the error at: ....
View 9 Replies View RelatedI keep getting a value of 0 for .Execute and .FoundFiles. I have had several experiences where it has correctly returned the number of files in the folder one day, and zero the next, even though there have always been files in the folder. The code returns the correct folder name so I know it is searching in the correct location, it just doesn't see the files that I know are there. Why don't I consistently get the correct number of files returned?
Sub Execute_Table_Load()
Dim File_Path As String
Dim Folder_Path As String
Dim i as Integer
Dim Document_List As String
Dim docName as String
Dim fs As FileSearch
File_Path = ThisWorkbook.Path
'Build a path to the folder where the word documents are:
Folder_Path = File_Path & "Test"
Set fs = Application.FileSearch
With fs
.NewSearch...........................
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
Trying to write a script to carry out a number of tasks but is there code to enable an Excel to look in a particular file for the list of csv files - carry out the tasks and return the appropriate values in the Excel sheet whilst leaving the original csv files untouched?
View 2 Replies View RelatedI have 50 files each with 1000 numbers in column A.
I need to compare every list with every other list and calculate the Pearson function.
I am ok with the vb code to compare every file with everyother.
I can do this by opening each file then closing but it takes too long.
Each of the 50 csv file names is in my destination workbook
I would like to define an array using the file name, then extract 2 lists without opening the files then perform the pearson function and place the value in the destination workbook. (The pearson function just measures the strength of correlation between 2 sets of numbers)
I am trying to use some vba match function code to return the column number of the matching date. The date will be stored in a date variable.
Every time I run this code I normally get a match error even though the date is in the worksheet and the variable matches that date.
See below:
[Code] .....
I am working with Excel 2010.
There are certain .xlsm files in our system (some have macros and others don't) which generate "Error: Source not Found" in the Edit Links dialog box when the Check Status button is pushed. However, the source location is correct, as you can click on Open Source and it will open the correct file.
For simplicity of explaining my issue, consider the following scenario. In my workbook "Corn Production Summary.xls_" I link to 2 source files: "Iowa.xlsm" and "Nebraska.xlsx" (Note: The extension of the summary file doesn't matter. This error happens regardless of what the summary is.)
When I open "Corn Production Summary" I am prompted to update values. I select Update and the file refreshes and recalculates appearing to have updated all values (i.e. no error messages). However, the values from Iowa.xlsm did NOT update and there was no error message indicating that the values didn't update.
To confirm this, I go to Data>Edit Links>Check Status in "Corn Production Summary" and I see that Iowa.xlsm has the "Error: Source not Found" error. I click on Open Source and once the file is open, my data in the summary file will update.
One work around was to do the following process (with the summary file closed):
1) Iowa.xlsm and Save As Iowa.xlsx (removing macros if needed)
2) Save As Iowa.xlsx as Iowa.xlsm (overwriting the file that is currently there and readding the macros)
3) Open the summary file and both Iowa and Nebraska work just fine now.
There are a lot of files like this, and because Excel doesn't prompt us that it isn't really getting the values from these certain .xlsm files we would have to search in "Edit Links" for each file to make sure that they really are updating.
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
display workbook not found in Array set without Filepath, As for workbooks found we can use Dir function, but it is not work for workbook not found. The Dir() will return Blank.
e.g. in my filepath only has Book1.xlsx.
[Code] ....
MsgBox CountFound = 1
MsgBox CountNotFound = 3
MsgBox FileFound = Book1.xlsx
MsgBox FileNotFound = Blank
Working with an existing macro from this forum. How do I create the array showing the number of sheets found? I know from a MsgBox that two sheets are found.
View 3 Replies View RelatedI'm using VLOOKUP to search for results in another worksheet. What I need is 0 returned if the search fails. Currently I'm getting #N/A and that's causing my other formulas to fail.
View 8 Replies View RelatedI am trying to compare a single cell's Value in 1 worksheet to try to find a match in another column (or a range of cells). If I find a match I want the result to be a 1 and if it is not found then a 0.
Is this the Lookup function?
I currently have the below formula to search for text of interest (A1) within each cell of a column (B6:B30).
=IF(ISERROR(MATCH(A1,$B$6:$B$30,0)),"NO","YES")
The formula works perfectly if there is only a single value in the cells. But not so well when the cell has multiple values separated by a comma.
For example:
Column B
X
Y
Z
T, X, Y, Z
It would return a "Yes" for X, Y, and Z because those are found individually. However, T will appear as a "No", because it is found within a cell that is separated by commas.
I want to return a result IF a certain value is found in another cell. I've attached a sample workbook, but here's a description:
On the "Inventory" worksheet, in column H, I want to lookup the quantity in column B from the "Warehouse Response" worksheet. If the Part # in column E of the response sheet is NI1088106, I want THAT value to show under the NI1088106 part number, and I want the quantities for the NI1089106 to show under that part number. Ideally, the result of the formula would show a "0" if no data is found.
Here's the formula I tried beside the NI1088106 data, but it's not giving the desired results: =IF('Warehouse Response'!E:E="NI1088106", VLOOKUP(LEFT(A3,3),data,2,0))
I am trying to look in B1:B100 for the Cell that matches A1 and C1:C100 for the cell that matches A2 then return the value from D1:D100 that meets the 2 criteria.
View 6 Replies View RelatedI know I can do this by nesting a load of if statements but I was wondering if there is an easier way.
If in cell A2 I have the value 12 and I want cell A1 to return a value FOUND if any cell from A6 to A24 has the value 12 in it.
I am looking for a function that will search a range like 101-199, 200-249, 250-299 and so on.... Say I have a list of numbers like 155, 179, and 210. How can I find out what range they belong to? I am kind of looking at SumIf's but I cant seem to get that to work.
View 3 Replies View RelatedIm trying to create a formula that check to see if the value in H4 equal any value in the vlookup table m4:m48, if so, then Y, if not then N. the following does not work: =IF(ISNA(MATCH(H4,M$4:M$48)),"N","Y")
View 2 Replies View RelatedI need to pull data from Column C by looking at Column A. However it's not as simple as that. Under Column A, there are various fields, the first number represents a type of product and under what year it is currently in. So "300100" would represent a 3 yr product that is in it's third year, "210000" would be a 2 yr product in it's first year and so on. The problem is that when I pull data from the DB, some 3 yr products are flagged as products that are in their 4th or 5th years, which isn't possible. So I created an IF statement that takes this into account and ignores illogical combinations.
=If(A2="300100",C2,If(A2="301000",C2,If(A2="310000",C2,If(A2="210000",C2,If(A2="201000",C2,If(A2="510000",C2,If(A2="501000",C2,If(A2="500100",C2,))))))))
As you can see, I don't have the conditions "500010" and "500001" because it won't fit into the IF statement. Is there another way to go about doing this task? I've searched up the forums and someone recommended using the IF statement with VLOOKUP but I don't think it works in this particular case since I have 10 conditions.
A have a table like this:
X 1 2
A 9 5
B 8 4
I would like to have a condition that when is equal to B and 2, return the corresponding paragraph in the matrix (in this case 4)
I am trying to use a formula similar to VLOOKUP() to look in a table for two values and if both values are found, return another value.
Sheet2 is an example of my output file, sheet one is a generated file. i would like the vlookup formula in sheet 2 cell D2 and down to be something like this,
=VLOOKUP(A2,Sheet1!A:K,10)
But I would like to lookup A2 and B2, and the row that contains both values, return the value in the J column
If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
I have an Excel Worksheet with 80,000 lines on it. The Columns are arranged thus:
Col A
Col B
Col C
Col D
Col E
Col F
Code
Description
Cost
Rate
Mobile
0.13
1234
Australia Mobile
0.12
Not Mobile
[Code] ........
I am looking for an Excel Formula that will look up Australia & Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to mobile (F3).
Then I just want a variant of the same formula that will look up Australia but exclude Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to Not mobile (F4).
I have three named ranges that I need to do lookups for First I need the formula to do a look up at the HUMANALOOKUP range and then if a value is not found go to LABLOOKUP and then if not found go to CHCSLOOKUP and if not found return a blank. the column layout of each worksheet is the same so the column index number same throughout the formula.
View 2 Replies View RelatedIn a large spreadsheet that receives external data, I have codes (U, N or V) allocated at various times to different rows as shown in sample worksheet attached. Elsewhere in the spreadsheet, I need to display (for later export) these codes along with their respective number in a sorted list. Please review the attached:
In the spreadsheet you'll see a column of codes, the next column is the data reference number, then to the right is three columns, one for each code. As displayed in the sample book attached, each Code column is to display the data reference number (from column 2)that matches that column's code.
What formula can I use to list these numbers in the appropriate columns?