I am trying to assign a macro to the Print button on the Standard Toolbar. Basically I want that button to print the number of pages I've specified in a cell, but I still want to be able to use the 'File/Print...' option if I need to.
I did try to solve this issue in an earlier post, but this exact problem remained unsolved. For more information
I am using the following code to create an Excel toolbar custom control Button. What would be the VBA code to change the color of the image I have chosen? ....
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
I have created a toolbar button to save a file as a specific name based on a cell value. The macro runs fine, but the button changes priority when the new file is saved.
i.e. the original file is called "quoting_tool" and the newly created file is called "quoting_tool_'B3'". However, the next time I click this button in the original file, it requests the new file as the home of the toolbar button. I have tried saving the original file after adding the button, but that doesn't work.
I've created a custom toolbar via Excel's toolbar wizard, to which I have added several macro buttons. However, when clicked, instead of running the assigned macro, Excel instead attempts to open my already open file?? I think I read something about having to manually change the buttons to refer to a .xla ??? Not sure though.
When I hit the print button on the Standard Toolbar, I want my printer to print only the number of pages specified on my worksheet which I previously entered into Cell A1.
Is there a formula or something I can use for this?
I am looking to create a form button in Excel 2010 that runs a .tto file. I have an add-in for Excel 2010 called "Transfer Data From Iseries" The .TTO file is a definition file of files, SQL, etc. What I need is a button on the screen (I do not want to try to explain to 1K users on how to add an add-in in Excel. When you click on the button it should open the transfer dialog box and then they put in a userid/password and it populates within that Excel file.
I tried to record a macro to get the script, but it does not record this information. I also tried to use Insert > Object in excel and it works, except that it does not open the data into that specific excel file (the one that you are in).
I have written a macro. The macro in question simply shows a user form. There is far more code within the user form itself. It is designed to automatically format a workbook.
I saved the macro as an .xlam add-in file to the default folder. I then added a button for the macro to my Quick Access Toolbar. This seemed to work great.
However, when I open a new file that I want to run the macro on, the button disappears. In fact, a 2nd Excel window opens up on my task bar. The original window still has the macro button, but the new window does not.
I created a custom toolbar button which works perfectly.
Because I needed to save each workbook as a specific workbook this is taken care of by the vb code.
I would like when the button is pressed for the original workbook template to be opened.
At this moment if I have a blank workbook or no workbook open and I press the button the programme opens a version of the workbook but not the template version how do I point Excel at the templates.
Image size appears in button(msocontrolbutton) of custom toolbar Excel 2000 is very small and blurred using below code. How I can increase size of image in button (msocontrolbutton) as well as brightness of image in custom toolbar? I am able to increase size of button using width and height property but image appears in center of button as 16X16. How to fit image to button(msocontrolbutton)?
Const cImgCommandBarID As String = "TMC Img Toolbar" 'Image code Dim cbImgBar As CommandBar
Set cbImgBar = CommandBars.Add( Name:=cImgCommandBarID, Position:=msoBarTop)
'cbImgBar.context = 1000 Dim cbImage As CommandBarControl Dim imgTool As Shape Dim sFileName, ImgSheet sFileName = ActiveWorkbook.Path & "ImagesABC.jpg".....................
I have finally come up with a macro and would like to install it to around 10 people's "Personal Workbook" in my department. Let me explain a bit further...
We use web-based software which has an "Export to Excel" option which we all use. The resulting data populates into a spreadsheet automatically.
I would like the user to be able to click on Tools/Macro/Run Macro and then run that particular macro. I assume that this macro should be in the "Personal Workbook" so that the macro will be visible no matter what worksheet they may have open?
Can this be done automatically/with a macro or must this be manually done?
I've created a custom ribbon which contains checkboxes that hide or show columns.
I would like to change the enable state of the checkboxes while the user is interacting with the spreadsheet.
For example:I would like to disable all of the checkboxes if they are not viewing sheet1I would like to disable the second checkbox if the first checkbox is unchecked.
I know how to set these all on initialize. I just have not figured out how to update these controls after it has been opened.
Some option must've changed recently in my excel spreadsheets by accident and now when I hit the enter key it doesn't drop down to cell in the next row, it just stays there.
I have a togglebutton for an excel sheet in use for scoring psychological tests. When pressed, the button higlights the cells where a raw score is inserted.
What I need is a code to higlight the togglebutton when pressed, eg. green (colorindex 4). The button is white. How to do this?
Below is the code, It has more lines than needed, but it works.
Private Sub ToggleButton1_Click() 'FKV TOGGLE'
ActiveSheet.Unprotect "manisk" If ToggleButton1 Then
which of these toolbars provides the better 'controls' to paste onto worksheets (as opposed to UserForms)? For those wondering, both toolbars contain some apparently similar controls, e.g., combo box, radio button, spinner etc. but there are differences in their behaviour it would seem...
I use the command ActiveSheet.Shapes("ZoneTexte " & R_Box).TextFrame.Characters(Start:=1, Length:=10).Font.Size = 10
To modify the Font.Size the 10 first characters in my textbox.
Work fine the first time. Problem occured when the same macro is called for the second time in the same textbox.
Problem: I got 20 of the first characters font.size modified instead of the first 10. Calling it a third time, i will have thirty characters. The start :=1 seems to be modified.
Strange and i have problem to explain it using my FranGlish language writing
What do you think? I think it can be done but do not want to waste time going about it the wrong way. Please give me any ideas on how you would approach this problem.
Some information to start with. The modal dialog that pops up can be dealt with.
This one.
I can determine if I want to insert down or up. I am not concerned with shifting left or right at this point.
I can also determine the original address and destination address of the drag and drop operation by using the change event.
The ranges being dragged will be limited to a single cell.
A client of ours has one particular file that has some very strange behavior as described below. This only occurs with the one particular file and the behavior is consistent across different PC's in both their office and ours. All other Excel files in both offices work fine. Here's what happens:
- you can use Windows Explorer to copy the file between drives without a problem (as expected)
- if you open the file in Excel on one drive then save it back to that same drive with either the same file name or a different file name, the file works fine (as expected)
- if you open the file in Excel on one drive then do a "Save As" to save it to a *different* drive with either the same file name or a different file name (in default .xls format), the new file causes errors in Excel every time you open it as per below (weird!)
- even if you do a "Save As" and choose a different format eg Excel 97-2003 or Excel 95, the error behavior is consistent (weird!).............
I have the data below. I need to total the amount in the USD Equivalent column but there is an exception. Where the "Curr Sold" and the "Curr Sold" are the same in reverse (as highlighted) in yellow, I need to take the net figure. For example below, I need to add the USD Equivalent column but then minus the 6,013,072.66 because the CHF - USD is the same in reverse with the same maturity date.
I am looking for the settings if possible that will add to a custom tab in the ribbon.
What I have is an add-in that creates a custom tab in the excel ribbon. I save it as an add-in and activate it in excel options so it is available for all workbooks.
Now I have a callback in there that runs a macro that opens a workbook, this workbook also has custom UI that I want additional callbacks added to the same custom tab created in the add-in.
I need to modify 2 Excel built-in dialogs via VBA. Here is the first dialog box:
Application.Dialogs(xlDialogWorkbookCopy).Show
First, in the "Move or Copy" window, where it says, "move selected sheets to book:" I'd like the default selection to be the open workbook instead of "(new book)", which is the current default. How can this be done?
Second, I'd like to remove the check box so there is no option to copy visible, however, I need to add the code in the sub procedure to make a copy. How can I do this?
The second dialog box I need to modify is this one:
Application.Dialogs(xlDialogPageSetup).Show.
What I need this to do is open with the tab" Header/Footer" visible as a default, or, better still, have only the "Header/Footer" tab available and the other 3 tabs not there at all. How do I do this?
I am very proficient at Excel/VBA and have a question about custom/user-defined functions that may be a little more advanced. I understand how to write custom functions and access them through the user-defined functions menu, but I would like to be able to include my function in an add-in that users could simply add, and then access the function via the 'Fx' box at the top of Excel, like they would any other built-in function, instead of having to go to the user-defined functions menu. I guess what I am looking for is how to add 'built-in' functions and not user-defined ones. I just want the user to start typing '=customFunction(' and have the parameters pop-up in tool-tip form, like any Excel built-in function would.
I would like to export some of the functions available in Excel/VBA to some other languages (especially lookup functions, COUNTIF, etc.). Is it possible to find the code somewhere?