I have created a toolbar button to save a file as a specific name based on a cell value. The macro runs fine, but the button changes priority when the new file is saved.
i.e. the original file is called "quoting_tool" and the newly created file is called "quoting_tool_'B3'". However, the next time I click this button in the original file, it requests the new file as the home of the toolbar button. I have tried saving the original file after adding the button, but that doesn't work.
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown .State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
I've created a custom toolbar via Excel's toolbar wizard, to which I have added several macro buttons. However, when clicked, instead of running the assigned macro, Excel instead attempts to open my already open file?? I think I read something about having to manually change the buttons to refer to a .xla ??? Not sure though.
When I hit the print button on the Standard Toolbar, I want my printer to print only the number of pages specified on my worksheet which I previously entered into Cell A1.
Is there a formula or something I can use for this?
I had made a Workbook with my own command Bars, and everthing is ok .. the problem is when i copy it to anthor pc. i have got an error msg. and when i check the code (debug) i've found the problem is with that command bars ( it's missing ) and now the Q is:
how to copy a workbook with it's all add-in's and customised bars ?
I have added a toolbar to an excel application that the company uses. I need this toolbar only to be accessed to this application and not any time that you open excel. I have used the following
Private Sub Workbook_Open() Application.CommandBars("Rithin-Toolbar2006").Enabled = True Application.CommandBars("Rithin-Toolbar2006").Visible = True go_cover End Sub
Private Sub Workbook_close() Application.CommandBars("Rithin-Toolbar2006").Delete Application.CommandBars("Rithin-Toolbar2006").Enabled = False Application.CommandBars("Rithin-Toolbar2006").Visible = False End Sub
This works but only If I accept yes when it prompts me to save changes to the workbook. Each time I open the workbook and close it, it prompts me to save changes to the workbook. I dont want to force a save on the workbook, meaning have code that will save the workbook before closing. I want it such that if the user opens the workbook, and makes no changes, he/she should just close it with no questions asked.
I am trying to assign a macro to the Print button on the Standard Toolbar. Basically I want that button to print the number of pages I've specified in a cell, but I still want to be able to use the 'File/Print...' option if I need to.
I did try to solve this issue in an earlier post, but this exact problem remained unsolved. For more information
I am looking to create a form button in Excel 2010 that runs a .tto file. I have an add-in for Excel 2010 called "Transfer Data From Iseries" The .TTO file is a definition file of files, SQL, etc. What I need is a button on the screen (I do not want to try to explain to 1K users on how to add an add-in in Excel. When you click on the button it should open the transfer dialog box and then they put in a userid/password and it populates within that Excel file.
I tried to record a macro to get the script, but it does not record this information. I also tried to use Insert > Object in excel and it works, except that it does not open the data into that specific excel file (the one that you are in).
I have written a macro. The macro in question simply shows a user form. There is far more code within the user form itself. It is designed to automatically format a workbook.
I saved the macro as an .xlam add-in file to the default folder. I then added a button for the macro to my Quick Access Toolbar. This seemed to work great.
However, when I open a new file that I want to run the macro on, the button disappears. In fact, a 2nd Excel window opens up on my task bar. The original window still has the macro button, but the new window does not.
I am using the following code to create an Excel toolbar custom control Button. What would be the VBA code to change the color of the image I have chosen? ....
I created a custom toolbar button which works perfectly.
Because I needed to save each workbook as a specific workbook this is taken care of by the vb code.
I would like when the button is pressed for the original workbook template to be opened.
At this moment if I have a blank workbook or no workbook open and I press the button the programme opens a version of the workbook but not the template version how do I point Excel at the templates.
Image size appears in button(msocontrolbutton) of custom toolbar Excel 2000 is very small and blurred using below code. How I can increase size of image in button (msocontrolbutton) as well as brightness of image in custom toolbar? I am able to increase size of button using width and height property but image appears in center of button as 16X16. How to fit image to button(msocontrolbutton)?
Const cImgCommandBarID As String = "TMC Img Toolbar" 'Image code Dim cbImgBar As CommandBar
Set cbImgBar = CommandBars.Add( Name:=cImgCommandBarID, Position:=msoBarTop)
'cbImgBar.context = 1000 Dim cbImage As CommandBarControl Dim imgTool As Shape Dim sFileName, ImgSheet sFileName = ActiveWorkbook.Path & "ImagesABC.jpg".....................
I have finally come up with a macro and would like to install it to around 10 people's "Personal Workbook" in my department. Let me explain a bit further...
We use web-based software which has an "Export to Excel" option which we all use. The resulting data populates into a spreadsheet automatically.
I would like the user to be able to click on Tools/Macro/Run Macro and then run that particular macro. I assume that this macro should be in the "Personal Workbook" so that the macro will be visible no matter what worksheet they may have open?
Can this be done automatically/with a macro or must this be manually done?
I have a UserForm in which i have inserted a CommandButton. I also have a Table on a Sheet in Excel that i would like to save as PDF.
When i click the CommandButton on the UserForm i would like the SaveAs screen to come up and have the Table (or Used Range in the Excel Sheet) as the selection to be Saved as .PDF format.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
I have a spreadsheet with 32 worksheet, I want to write a macro to "save the work, save as.. in a specific location and with a specific name and then reseting all data in specific cells.
I have a update/Save button on a spreadsheet. So when clicked it updates another sheet and saves the workbook. how can i have it run the macro when they don't click the button and do File -> Save.
which of these toolbars provides the better 'controls' to paste onto worksheets (as opposed to UserForms)? For those wondering, both toolbars contain some apparently similar controls, e.g., combo box, radio button, spinner etc. but there are differences in their behaviour it would seem...
Just playing around again, seen this file a person posted today and like it. I wounder if a Save As button can be made. This would just be a shortcut to save projects from a master form. Here is a example of my project.
I know how to add a save and close button but i do not know how to make it instantly available in every new workbook that i open. Currently i click the button and it looks for the macro in the first excel book that i created it in.
how do i make that macro become a default in every workbook?
I need to modify it as it currently allows the user to save even if there is no values in D2 or D3. I need it to look at these cells first as well as A17-F25 and if there is no data in any of these cells it either brings up an error message saying you need to enter data in these cells to save!
Also, at present the user has to click on the default save button within excel to save changes made after the initial save, could this be added to the button I have created?
My sheet has a calculator that outputs a value based on inputs. I also have a pick list on top labeled Q1-Q4. Depending on which value is selected on the picklist, the input values will output a different amount. I want to create a button which allows me to take this output and save it in another cell under a heading Q1, Q2 etc. depending on which Q was selected in the original picklist. In essence I want a button that records each output onto the same sheet by by quarter(Q).
