Change Event Code When 2 Cells Are Selected
Jul 15, 2014
Looking for a Private Sub Worksheet_Change(ByVal Target As Range) code to concatenate cell J, K, E and F cells when both J6 and K6 are selected. The cells start in J6 and K6. When both J6 and K6 are selected, I would like a VBA code to concatenate J6, K6, E6 and F6 in cell L6
(Here is the formula =IF(OR(J6="",K6=""),"",I6&" "&J6 &" "&K6&" - "&E6&" "&" "&F6 I have but looking for a VBA code to accomplish task).
When either J6 or K6 is selected, the code should not concatenate until both cells (J and K) are selected. I would also like a Clear Contents function to clear L6 (or L7, L100, L80 or L13) contents when either J or K cell is deleted. For example, if K value is deleted, the Clear Contents should clean J and L cells contents.
View 13 Replies
ADVERTISEMENT
Nov 7, 2006
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
View 3 Replies
View Related
Jul 20, 2006
change the below code from a worksheet_change to a worksheet_calculate method. and still do the same action. the reason I am changing methods is due to the fact that the validation will not trigger the worksheet_change event to fire. this is my attempt to find an alternative way to fire off the macro.....
View 9 Replies
View Related
Sep 27, 2007
I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...
View 7 Replies
View Related
Mar 21, 2007
I have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
View 4 Replies
View Related
Oct 21, 2008
the code i have got is attached below but the problem i am having is when i enter the letter "H" which is calculated in AJ and i enter it fast it comes up with the error "Out Of Stack Space error 28". AJ in the code below is where the cumlative value is stored, and AI is the value that it is measured against it AJ is greater than AI the message is displayed.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rRow As Range
Dim icolor As Integer
Dim ifont As Integer
With Application
.CellDragAndDrop = False
.CutCopyMode = False
End With
If Intersect(Target, Me.Range("TABLE1")) Is Nothing Then Exit Sub
Me.Calculate
For Each rRow In Target.Rows
If Me.Cells(rRow.Row, "AJ") > Me.Cells(rRow.Row, "AI") Then
rRow.ClearContents
MsgBox "No Holidays Left or No Holidays setup Against Them " & Me.Cells(rRow.Row, "AI") & " days."............................
View 9 Replies
View Related
Jan 20, 2014
I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then
Rows("5:5").Select
[Code]....
View 3 Replies
View Related
Nov 6, 2006
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
If Target.Address = "$A$1" Then
'Ensure target is a number before multiplying by 2
If IsNumeric(Target) Then
'Stop any possible runtime errors and halting code
On Error Resume Next
'Turn off ALL events so the Target * 2 does not _
put the code into a loop.
Application.EnableEvents = False
Target = Target * 2
'Turn events back on
Application.EnableEvents = True
'Allow run time errors again
On Error Goto 0
End If
End If
End Sub
View 2 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Feb 15, 2014
I have the following code that I would like to trigger when cells B26:U26 change to something other then 0 due to a formula? How was I make this happen?
[Code] .....
View 4 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Aug 28, 2013
[URL] and how I could modify the conditional formatting/vba to return the same effect but for a selected range, not just a cell?
View 2 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Oct 28, 2009
I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:
Copy the cell I have selected
View 3 Replies
View Related
May 12, 2011
I often find myself in the following situation - I will highlight a range of numbers to see what the sum is in the bottom right hand corner (the cells which I select areoften not all within the same column or are not consecutively listed under each other) .Depending on the circumstances I will then type out a SUM formula with the range to put that value somewhere in the spreadsheet - the problem being that I have to deselect the cells and then re-select these within the formula. When I have selected many numbers, it is not always easy to remember every number which I included.
As a way to remember the numbers, I format those cells in a certain colour before I do the SUM formula and would then include only those coloured cells in the formula. I would like to avoid this extra bit of work.
I am new to VBA but would like some form of code that allows me sum the contents of a selected range and paste that formula beneath the last value in the range - the range would have been selected before running the maco.
View 7 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Apr 21, 2014
I have recorded macro.
What I am trying to achieve is ....
When I select cell A2 and press command button Then - Columns C, D, E are unhidden
-Relative cells in selected row ( in this case C2,D2,E2) change font to 12
- When command button is pressed then C,D,E are hidden and font size goes back to 1
similarly if i select A3 same should happen to C3,D3,E3
Currently all is OK but when I press command button it all happens with the entire column C,D,E
Sample book attached.
Code is as follows:
[code]....
View 6 Replies
View Related
May 15, 2009
Looking for VBA that can change the font size of "•" char(0149) within any string in selected cells.
Also looking to delete the last "•" char(0149) within any string of selected cells.
What would the syntax for these two functions be?
View 9 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
Jul 21, 2009
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
View 9 Replies
View Related
Jul 11, 2012
Software: Excel 2010, Windows 7
What is the VBA code for inserting text in all column B-cells of multiple selected rows?
I am creating a worksheet with a table containing various data related to orders of various materials (this is more or less data gathering from an older, paper-based 'system'). This table spans, columnwise, from A to D and expands downwards as more orders are added. The information in each column is: A=order number, B=type of material and C=material specs. and D=additional comments.
I've set it up so that the only thing I really have to do is to insert the type of material in the cells of column B, and the rest will sort itself out. Instead of having to insert a new row for each new entry and manually typing in the name of the material (these entries are often done in the midst of already existing data), I created several similar, macroed buttons for the different types of materials we use. These macros work by selecting the row of the currently active cell, inserting a new row and then add the name of the material in the column B-cell of this new row. What I am having trouble doing though, is to get the text-entry to work for a selection of multiple cells.
As an example, lets say that I would like to add 5 orders of "Grade A Steel" in the middle of the table - in the row above row 8. With the macro I currently have I can select cell B5, click the macro, and a new row will be inserted with "Grade A Steel" in column B of this new row. This action could be performed 5 times over, but would be easier if I could just mark a range of 5 cells, say B8:B12, click the macro and get the text/data inserted the column B-cells of all 5 of the new rows. So far I've been able to create a macro that inserts multiple new rows, but I've only been successful in filling the column B-cell in the first row leaving the 4 below empty.
View 8 Replies
View Related
Sep 27, 2007
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
View 2 Replies
View Related
Feb 21, 2013
Excel 2007/2010.
Hope this is fairly easy to solve. I have Screen #1 with a listbox with a CLICK event. The event populates a combobox below (with items based on listbox's selection). Listbox is NOT multi-select. Code runs fine manually, i.e., user opens screen selects from listbox, then can select from combobox.
I now what to open and make selections from another form/screen, Screen #2. I've written code to select the proper item from Screen #2's listbox but this does NOT trigger the listbox's CLICK event for me so the combobox isn't populated so I can then make that selection from Screen #1, also. I've tried setting focus to listbox first, then making selection, but that doesn't work.
QUESTION: Is there code that selects from a listbox in a way that mimics the user clicking the selected item in the listbox?
The alternatives I can think of are:
1) Change Screen #2's listbox code from CLICK to CHANGE event, but I'd rather not.
2) Move CLICK event code to sub-procedure and then call from both listbox CLICK and Screen #2 code
3) Some sendkey string like ENTER?
Would be easier to just mimic the user click, if possible.
With frm_Screen2
'Select item type from listbox
With .LBox_Items
[Code].....
View 7 Replies
View Related
Oct 15, 2007
I am busy with a project using VBA to populate a spreadsheet based upon the data entered into a particular cell. The problem that I am experiencing is that I populate the initial cell via a combo-box which I cannot exit unless I click elsewhere with my mouse. The code that I am using to populate the other cells is as follows
Private Sub Worksheet_Change(ByVal target As Range)
Application. ScreenUpdating = False
On Error Goto dump
Dim r As Range, MyRowNum As Long, ws1 As Worksheet, ws2 As Worksheet, strPriCode As Variant, _
strNAPPIE As Long, strSInCost As Currency, strSInDesc As String
Set ws1 = Worksheets("SINVOICE")
Set ws2 = Worksheets("STOCKIMP")
Set r = ws1.Range("B11:B35")
If Intersect(target, r) Is Nothing Then Exit Sub
If target > 0 Then....................
View 2 Replies
View Related
Jul 25, 2014
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
View 1 Replies
View Related
Apr 19, 2009
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
View 7 Replies
View Related
Sep 2, 2006
Is is possible to use VBA to remove/delete a macro and also remove code like this on worksheets:
Private Sub Worksheet_Change
End Sub
Private Sub Worksheet_Activate()
End Sub
View 4 Replies
View Related
Feb 7, 2014
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
View 2 Replies
View Related
