Change Macro From Text To Number

Jan 8, 2013

Macro works fine if i manually enter a time ie: 14:00 into cell a5 but it only sees a5 as text not as a time format how do i change it so the macro is looking for time not text entry?

Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Application.ScreenUpdating = False If Target.Address = "$A$5" Then
Dim raceTime As String raceTime = Target.Value
If raceTime "" Then

[Code] ........

View 1 Replies


ADVERTISEMENT

Change Number (1 And 0) To Text

Jun 7, 2012

I am writing a code which should generate the letters m or f (male/female) in A2:A21. I am able to generate random 1's and 0s, but now i can't convert them to the letters. Below is the code (note: i know it might not be the smartest way to do this, but to keep the same datastructure which i have in previous coding, i would like to keep it this way)

****
t = 1
Range("A1").Select

Low = 1
High = 2

Do

t = (t + 1)
ActiveCell.Offset(1, 0).Select
value= Int((High - Low + 1) * Rnd() + Low)
ActiveCell.Value = value
Loop Until t = 20

****

View 3 Replies View Related

Change Number To Text Using VBA

Dec 9, 2012

I would like to change the number 0 in the following range T4:V123 to SS. I know I can do that with inserting another column and using formula =IF(U4=0,"SS",U4) but that would change references in another sheet (Awards) and necessitate redoing a lot of formulas. Would it be possible to insert a line of code in that sheet changing 0 to SS for that particular range?

View 2 Replies View Related

Change Text To Number

Aug 6, 2013

i have a sheet that has ratings from Low, Medium, Moderate, Critical.... and that's how we receive that sheet, so you cannot really know in what cell is the rating going to occur;

so my question is, is there a way to asign numbers to these texts so they can be easily pulled to access?

View 7 Replies View Related

Excel 2010 :: Macro For Replacing Text In HTM Document - Text To Change Different Every Time

Mar 18, 2014

I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.

An example:
My htm document is located at C:/ and named XX.htm

The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx

And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:

src="Bilder/72.png"

View 8 Replies View Related

Change VBA Text To Read As A Number

Jan 10, 2008

The code below is for a Userform to allow data to be entered into a form and than placed into a worksheet. Also this code allows me to edit the existing data in the worksheet and than place the data back into the worksheet when down editing.

The problem is some of the data in my userform are numbers and the userform is reading it as text. When I enter numbers into the userform and than place it into the worksheet, how can I change the code so that the userforms to recongnize numbers not a text?

Private Sub UserForm_Initialize()
With ActiveCell
If .Value = vbNullString Then
With .Parent
Set myCells = .Cells(.Rows.Count, 1).End(xlUp).Offset(1, 0)
End With
Else
Set myCells = ActiveCell.EntireRow.Range("A1")
End If
Set myCells = myCells.Resize(1, 28)
End With
Call FromSheetToUserform
Me.txtTYPE.SetFocus
End Sub

Sub FromSheetToUserform()
Dim myData As Variant

myData = Application.Transpose(Application.Transpose(myCells.Value))
If myData(1) = vbNullString Then myData(1) = Format(Date, "Medium Date")

With Me
.txtDATE.Text = CStr(myData(1))
.txtTYPE.Text = CStr(myData(2))
.txtIDENT.Text = CStr(myData(3))
.txtROUTE.Text = CStr(myData(4))
.txtTOTAL.Text = CStr(myData(5))
.txtSEL.Text = CStr(myData(6))
.txtSES.Text = CStr(myData(7))
.txtMEL.Text = CStr(myData(8))

View 9 Replies View Related

Excel 2010 :: Automatically Change Text Entries To Set Number ID / VBA?

Jul 24, 2014

Basically I first want to be able define around 100 variables such as:

Dog = 1
Cat = 2
Mouse = 3

And so on. The reason being my final data needs to be the numbers for it's purpose but because there are so many I can't possibly remember them all to just type out 23 | 44 | 76 | 2 etc. What I would like to then happen is that whenever I type out the words in a cell it's automatically replaced with the number ID.

So typing in

Dog
Mouse
Mouse
Cat
Dog

would automatically result in

1
3
3
2
1

In those cells when I hit enter or at the end in one go. Is this at all possible in Excel 2010?

View 1 Replies View Related

Change Cells To Number Using Button Macro?

Jul 30, 2014

I've got a button with the following code:

Sub uncheck_all()
Dim sh As Shape
Application.ScreenUpdating = False
For Each sh In ActiveSheet.Shapes

[Code]....

Currently, the button just unchecks a bunch of checkmarks. I want to modify the code so it also makes the value in cell C13 change to -9999, C14 to 9999, C16 to -9999 and C17 to 9999.

how to integrate that into the formula?

View 6 Replies View Related

Macro To Change Month's Number In A Formula

Jan 11, 2007

I have 2 columns in a a sheet, some cells in the second (not all cells) contains the current month's number (it comes after the multiplication sign in those formulas).

i need a macro that allows me automatically to advance the month's number each month in this formula (just the month's number), if it's 1 advance to 2, 2 to 3, 12 to 1 etc....
see a example of my formulas below, the formulas are in colomn B, the month number is whatever comes after * (multiplication sign).

example:
5500/11*12
12000*12+55000
=A2/11*12+55000

(i'm using excel 97).

View 14 Replies View Related

Macro To Change Text In A Column

Jan 14, 2009

Can I use a macro to change text in a cell? As an example, I have this list of names in a column. I'd like every other name to have a semicolon instead of a comma after the name. My list has commas now

Tommy,
Joe,
Warren.
Billy,
Bob,
George,

And I want it to look like this.
Tommy,
Joe;
Warren.
Billy;
Bob,
George;

Since I'm using macros on this page, I'd like to use a macro to do this

View 3 Replies View Related

Change Label Text Macro

Jul 28, 2007

Is there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.

View 2 Replies View Related

Change Button Text + Run Macro With Arguments

Sep 30, 2009

My apologies if this might sound a bit newbish compared to other questions asked on this forum, but I'm new to vba and there are 2 things I can't work out.

1) I wrote a function that takes an arguement and wish to call that from a number of buttons I placed on my worksheet, each button passing it a different value for the parameter. How can I do that?

2) From my code, can I reference back to the button to change its text?

View 8 Replies View Related

Macro To Change Background Color And Text Of Certain Cells On Mouseclick

Mar 15, 2013

creating a macro. I would like the background color of certain cells under column A (cells 12:25, 27:32, 34:38, 40:45, 47:51, 53:61, 63:70, 72:79, 81:88, 90:92) to change to the color green and display the text "Complete" on mouseclick.

Before the cell is clicked, it would be the color red, with no text. (I'm not sure if you need to know that).

Next, I would need a macro that resets everything back to red. I hope this macro could be assigned to a form button.

View 1 Replies View Related

Macro To Check Number Or Text

Oct 30, 2011

i have number of cells as below and i need to make macro to check last character in each cells if text the result will be 0 and if number the result will be 1

A1 42SRY239Acd2

View 9 Replies View Related

Excel Macro To Convert Text To Number

May 16, 2014

I have a very large exported data base to excel. See the Attachment. I have columns on the left with text that needs to stay as text, and rows at the top with dates. These are my filters to sort and view my data. The current problem I am having is some of the quantities in the bulk of my spreadsheet are coming in as text that need to be converted to numbers (that stupid green triangle in the upper left hand corner). I already have developed a macro to format, sort, extract, and place the data so it's more manageable to look through. I need to get rid of this convert to number error before running this macro.

I am looking to develop a macro that will find each of these "convert text to number" errors and convert the text to number. So far I have been unable to find a starting point.

The sample attached is only 1% of the actual size of the spreadsheet, and my exported data base is variable in size.

The only solution I have at the moment is to go to the bottom of my spreadsheet, find the last error, and highlight everything above and done one convert to number.

Sample.xlsx

View 3 Replies View Related

Macro To Convert Text To Number Without Rounding

Mar 27, 2014

This is what I have so far.

Code:

Range("L:L").Select
With Selection
Selection.NumberFormat = "General"
.Value = .Value =
.NumberFormat = "0.0"

[Code]...

The .NumberFormat = "0.0" is newly added and doesn't work.

View 9 Replies View Related

Converting A Column Of Text To Number With Macro

Nov 10, 2008

convert a column of text to number with macro.

View 9 Replies View Related

Convert Text To Long Number Macro

Aug 9, 2006

I have a range of numbers stored as text. I need to convert them to long numbers using vba. I tried typing a simple number = clng(a2), but that didnt work. Can someone help me with A) the right formula and B) the proper end(xlUp) format.

View 9 Replies View Related

Macro Resets Total In Text Box If A Number Deleted?

Jun 26, 2014

Attached file 140625 box adds.xlsm has three textboxes that are totalled in the fourth box.

The Code updates the total automatically as you ENTER numbers into cells, and overcomes "blanks", but I need it to update the total if you delete any of the three numbers.,

As shown below, I set the Code to "Exit Sub" if a cell becomes blank, but can't see how to invert it without going through the same "checking" process twice for the other cells.

As the Code structure is essentially the same for each box, I've just shown the first one here:

VB:
Private Sub TextBox1_Change()
If TextBox1.Value = "" Then Exit Sub [code]....

View 1 Replies View Related

Excel 2007 :: Change All Matching Value Based On Number Change In Column?

Feb 19, 2014

I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).

I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.

Demo1.xlsm

View 14 Replies View Related

Excel 2010 :: Macro To Change Excel Formatted Table Name Dependent On Number Of Loops

Jul 9, 2012

Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).

I am using excel for windows 2010. The macro that i have so far is below.

Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value

[Code] ........

View 1 Replies View Related

Macro Of Formula That Shows Character Location Number Of Text File

Aug 14, 2014

I am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.

Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.

View 1 Replies View Related

Worksheet Change To Function To Add Text To Cell Which Initially Triggered Change

Jan 10, 2014

i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.

The existing code i have is:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"

[code].....

I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?

View 3 Replies View Related

Change Number To Letter And Remove Number From Data Displayed

Nov 5, 2013

I would like to change a number to a letter and then drop a digit from the end.

Say my data in A1 reads 81234568, and I would like it to display in cell A2 as h123456.

View 3 Replies View Related

Correlation Between Colour Brightness And The Auto Change From Black Text To White Text?

Aug 16, 2013

So I have been playing around with the tab colors on my workbook and am trying to figure out the correlation between color brightness and the auto change from black text to white text. I've noticed that if the Green color value is higher, excel is more likely to use the black text. If Blue is high, white. Green takes precedence over Blue and Red is just kind of in its own world.how excel calculates this?

View 2 Replies View Related

Change Text Color When Comparing 2 Text Fields

Aug 20, 2013

How would I compare two text fields (old and new) and change the font in the 3rd column (Difference)?

For example:

Old: I can not figure 3 things out.
New: I can't figure 2 things out.
Difference: can not can't figure 3 2 things out.

View 1 Replies View Related

Change Decimal Number To Whole Number

May 14, 2008

I know the basics of excell, but haven't ever written any formulas or macros (if that's what I need?) that would perform the following opperations. Bare with me, it's a three step process.

1. I need any zero's to the right of the last number (1-9)
to be removed. (I think this can be done with the click of a button, somewhere?)

examples:
a. 173.17300 = 173.173
b. 231.11000 = 231.11
c. 53.00000 = 53.

2. I also need for the decimal to be moved to the right of the last number after the zeroes have been removed from the previous step. (This seems to be the most deficult step, but most important for me.)

examples:
a. 173.173 = 173173
b. 231.11 = 23111
c. 53. = 53

3. I then need to be able to cross reference those remaining numbers with a set of numbers I have.

examples:
Remaining Numbers / My List
a. 173173 / Not on list
b. 23111 / MATCH
c. 53 / Not on list

View 7 Replies View Related

Excel 2010 :: Convert Text To Number And Format Number Without 2 Decimal Places?

Oct 23, 2011

I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.

[URL]

View 4 Replies View Related

Generate Text Value Based On Number Of Times ID Number Previously Appeared?

Aug 3, 2012

Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:

id
event_name
C83-858
sample_1_arm_1

[Code].....

View 3 Replies View Related

Format Small Number Of Cells From Text To Number?

Mar 19, 2014

Text to Number or General.xlsx

The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved