Change Label Text Macro

Jul 28, 2007

Is there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.

ADVERTISEMENT

Change Forms Label Text Color

Mar 3, 2008

I used a label from the forms toolbar and can't seem to change the color of the text.

View 5 Replies View Related

Macro To Change ActiveX Label Caption?

Mar 2, 2014

I needed to put a Checkbox on a Worksheet. The standard Checkbox options in Excel FormControl and ActiveX Control were too small. I found a work-around using the following macro attached to an ActiveX Label that was formatted as Wingdings font. The macro basically changes the character from a empty box Wingdings Chr(168) to a checked box Wingdings Chr(254) when the user clicks on the label.

Private Sub Label1_Click()
If Label1.Caption = Chr(254) Then
Label1.Caption = Chr(168)

[Code]....

But I get this error on an ErrorHandler that I have included in the macro. "An error has occurred. Error number =438. Error Description=Object doesn't support this property or method."

View 3 Replies View Related

VBA To Change Row Label Range?

Feb 6, 2014

I have a worksheet ("Pivot Tables") pivot table ("Breakfast"), and the Field ("Date") in the Row Labels. The date ranges from 1/20/2014 - 2/6/2014. My issue is figuring out a macro to automatically change the date ranges to what I want.

The macro I recorded is this:

Code:
Sub DateChange()'
' DateChange Macro
'
' Keyboard Shortcut: Ctrl+r

[Code].....

Is there a simpler way to write the code so I do not have to change the dates I want visible each time. But instead just write the start and ending date.

View 5 Replies View Related

Change The Filter On A Row Label In A Pivot

Apr 25, 2014

I need to change a row label filter on a pivot table based on the value in a cell but don't know how to do this with VBA.

View 6 Replies View Related

Change The Caption Of OLEobjects Label?

Aug 5, 2014

I'm trying to change the caption of a label (OLEobject) and it is not working so far :

[Code].....

View 2 Replies View Related

Label Caption Change... Run Code

Sep 30, 2009

I have just noticed that there is no defult event for the running code after updating a label caption. I would like to have like a textbox does (Change,AfterUpdate). to run code on the label caption change. could it be done with activex?? can it be done at all.??

View 2 Replies View Related

Change Caption Of Label & UserForm

Jun 20, 2008

I present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?

e.g.

The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.

View 7 Replies View Related

Excel 2010 :: Macro For Replacing Text In HTM Document - Text To Change Different Every Time

Mar 18, 2014

I am my excel worksheet (excel 2010) I have one cell that changes every day (number). I want this number to open my htm document and replace the same number in a string in the htm and save/close this.

An example:
My htm document is located at C:/ and named XX.htm

The number I want from excel is in cell A1 in sheet1, and the worksheet is located in D:/ named yy.xlsx

And the text(number) I want to replace is in the following string in the htm document, in this string it is 72, next day it can be 30:

src="Bilder/72.png"

View 8 Replies View Related

Userform Textbox And Label Change From Cell

Apr 19, 2008

I want a floating userform (showmodel = false) to display the results of a cell.

On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.

I want the same results on a userform.

I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.

As i want this for display purpose only can i use the label for the above problem

View 9 Replies View Related

Change Caption Of Dynamically Created Label

Jun 26, 2007

For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:

Dim newLblFreq As MSForms.Label
Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True)
newLblFreq.Caption = Range("V" & i).Text & " Hz"

But once the label is created, the caption won't change, even if Range("V" & i) changes...............

View 6 Replies View Related

Change Label Caption Based On Scrollbar Value

Feb 1, 2008

I'm amtepting to populate some labels from some predefined strings based on the scrollbar value. I have these codes:

Option Explicit
Public Meddelande1 As String, Meddelande2 As String, Meddelande3 As String, Meddelande4 As String, Meddelande5 As String, Meddelande6 As String, Meddelande7 As String, Meddelande8 As String, Meddelande9 As String

Private Sub UserForm_Initialize()
On Error Resume Next
Workbooks("Kontrollsystemet.xls").Close SaveChanges:=False
Application. ScreenUpdating = False
Workbooks.Open "V:allaBeredningKontrollsystemetKontrollsystemet.xls", ReadOnly:=True
Sheets("Meddelanden").Activate
Meddelande1 = Range("B2").Text
Meddelande2 = Range("B3").Text....................

View 2 Replies View Related

Change Label Caption When Textbox Selected

Jun 11, 2008

I'm buildng a userform for data input.

As an aid, I have a label at the bottom of the form and when a person tabs onto a textbox that labels then states what you are supposed to input into that textbox along with an example. When you tab onto another textbox the caption on the label changes to give another explanation and example.

I attempted to insert an if statement into the userform which states that if a textbox is enabled then the caption of the label = "Example"

If textbox1.enabled = True Then label1.caption = "Explanation 1, Example 1"
If textbox2.enabled = True Then label1.caption = "Explanation 2, Example 2"
End If
End If

View 5 Replies View Related

Change Userform Label Based On ComboBox Selection

Dec 21, 2009

I have a userform that has a "payment type" combo box

This box consists of:

View 6 Replies View Related

Add Text To Label

Jul 21, 2006

I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label

View 3 Replies View Related

VBA Add Text To Value Data Label

Jun 29, 2014

I'm using the code below to create a pie chart and the code works fine.

[Code] .....

However, I now would like to change this so that I can add the word "FTE" at end of this part of code which creates the 'Value' data label.

[Code] ....

View 11 Replies View Related

Pass Userform1 Label Content To Label On Userform2

Jun 13, 2013

I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.

VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm

View 3 Replies View Related

Label Making (take The Information And Incorporate It Into A Label Format)

Jan 14, 2009

I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer

Customer: ABCD
Customer PO: 12345

Part Number Quantity
AB 1
** 15
EF 22
GH 14

and I need it to output:

CUST: ABCD PART: AB
PO: 12345 QTY: 1

CUST: ABCD PART: **
PO: 12345 QTY: 15

CUST: ABCD PART: EF
PO: 12345 QTY: 22

CUST: ABCD PART: GH
PO: 12345 QTY: 14

View 4 Replies View Related

Macro To Change Text In A Column

Jan 14, 2009

Can I use a macro to change text in a cell? As an example, I have this list of names in a column. I'd like every other name to have a semicolon instead of a comma after the name. My list has commas now

Tommy,
Joe,
Warren.
Billy,
Bob,
George,

And I want it to look like this.
Tommy,
Joe;
Warren.
Billy;
Bob,
George;

Since I'm using macros on this page, I'd like to use a macro to do this

View 3 Replies View Related

Change Macro From Text To Number

Jan 8, 2013

Macro works fine if i manually enter a time ie: 14:00 into cell a5 but it only sees a5 as text not as a time format how do i change it so the macro is looking for time not text entry?

Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Application.ScreenUpdating = False If Target.Address = "$A$5" Then
Dim raceTime As String raceTime = Target.Value
If raceTime "" Then

[Code] ........

View 1 Replies View Related

Extract Label From Text File

Nov 2, 2011

I want to extract particular label from the text file named 'Branch : xxx" i what to extract the xxx from the text file and save it as worksheet name, is that possible through a macro? Then if required i will import the text file through the recorded macro.

View 1 Replies View Related

Change Button Text + Run Macro With Arguments

Sep 30, 2009

My apologies if this might sound a bit newbish compared to other questions asked on this forum, but I'm new to vba and there are 2 things I can't work out.

1) I wrote a function that takes an arguement and wish to call that from a number of buttons I placed on my worksheet, each button passing it a different value for the parameter. How can I do that?

2) From my code, can I reference back to the button to change its text?

View 8 Replies View Related

Adding Text To Chart Data Label

Dec 14, 2011

I have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.

If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.

Date Value Description
01/01/2010 90% Text A
01/02/2010 80% Text B

View 2 Replies View Related

Rotate Userform Label Text 90 Degrees

Jul 23, 2013

I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.

I do not have to use a label but I do need the data to be shown at 90 degrees.

View 4 Replies View Related

Set Label Control Captions To A Cell Text/Value

Aug 23, 2006

I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.

'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary

frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value

The labels are not changing their values.

View 8 Replies View Related

Vertically Center Text In Userform Label

Apr 2, 2008

Is it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.

View 2 Replies View Related

Text & Cell Value For Chart Series Label/Name

Jun 26, 2008

How do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2

View 3 Replies View Related

Get VBA To Recognize Label In Userform As Value And Have Another Label Calculate From It

Aug 17, 2012

I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.

This is what I currently have. This returns $0.00 in the label value but does not calculate...

Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""

[Code]....

The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..

View 4 Replies View Related

Label Controls Whose Caption Is Set From Text From A Work Sheet

Nov 23, 2007

I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold

View 9 Replies View Related

Macro To Change Background Color And Text Of Certain Cells On Mouseclick

Mar 15, 2013

creating a macro. I would like the background color of certain cells under column A (cells 12:25, 27:32, 34:38, 40:45, 47:51, 53:61, 63:70, 72:79, 81:88, 90:92) to change to the color green and display the text "Complete" on mouseclick.

Before the cell is clicked, it would be the color red, with no text. (I'm not sure if you need to know that).

Next, I would need a macro that resets everything back to red. I hope this macro could be assigned to a form button.

View 1 Replies View Related

Userform Label Won't Show During Macro?

Dec 3, 2011

I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:

Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select

[Code].....

View 1 Replies View Related

Label Caption Does Not Appear Until Label Is Clicked?

May 13, 2014

I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?

Also example of my code is:

Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub

View 3 Replies View Related

Macro To Label Folders With Tags And Filter As Required?

Jan 29, 2014

Basically I have a large database of folders of examples of projects/notes etc, each with essentially lots of potential topic "tags". I want to sort them to be able to tell the macro what topic I am looking for and it give me the folders that contain that info. I will need to tag each folder individually (which is no problem). I am looking for a piece of script (that either exists or that I can write) that will do the following:

- tag specific folders with numerous "tags". The folders will all be stored in a database. The tags will be user input.

- sort these folders based on specified tags and show filepath/location/name/file number or something unique based on the tags input.

View 14 Replies View Related

Macro To Open Up Word, Grab A Label Template

Aug 16, 2003

Included in the macro, I would like for the macro to open up Word, grab a label template, that I have stored (have to navigate there), and then merge the data from the excel file into the Word template.

View 4 Replies View Related

Label Scatterplot Chart: Plot Two Values Against Each Other Using A Scatterplot, And Label Each Service

Feb 13, 2008

I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.

Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.

Problems include:

- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........

View 4 Replies View Related

Macro To Refresh Pivots Also Resets Chart Data Label Fonts

Aug 20, 2013

I have 6 pivot charts within a document. I use a macro associated with a button to refresh the tables and therefore the data displayed on the charts.

However, each time I refresh the data, the 'data label' font size also refreshes. What is particularly odd is that 5 of the charts are pie-graphs, of those 5 graphs, the font size only resets on 4 of them (with the data labels in a single chart staying at my desired font size).

I can manually put the font size back to that which I desire but I'd rather it just didn't change in the first place.

I've had a look to see if there's any noticeable differences between the 5 charts but there's nothing which I can find.

I'd be happy to run a bit of VBA to set the font size as I want it, if there isn't a better solution.

View 1 Replies View Related

Worksheet Change To Function To Add Text To Cell Which Initially Triggered Change

Jan 10, 2014

i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.

The existing code i have is:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"

[code].....

I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?

View 3 Replies View Related

Centre The Text In A Userform "Label"

Nov 7, 2009

probably missing something simple, but how do I centre the text in a userform "Label"

View 2 Replies View Related

Correlation Between Colour Brightness And The Auto Change From Black Text To White Text?

Aug 16, 2013

So I have been playing around with the tab colors on my workbook and am trying to figure out the correlation between color brightness and the auto change from black text to white text. I've noticed that if the Green color value is higher, excel is more likely to use the black text. If Blue is high, white. Green takes precedence over Blue and Red is just kind of in its own world.how excel calculates this?

View 2 Replies View Related

Change Text Color When Comparing 2 Text Fields

Aug 20, 2013

How would I compare two text fields (old and new) and change the font in the 3rd column (Difference)?

For example:

Old: I can not figure 3 things out.
New: I can't figure 2 things out.
Difference: can not can't figure 3 2 things out.

View 1 Replies View Related

Change Worksheet Change To Macro

Oct 23, 2008

Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................

View 9 Replies View Related

ADVERTISEMENT