Macro Resets Total In Text Box If A Number Deleted?
Jun 26, 2014
Attached file 140625 box adds.xlsm has three textboxes that are totalled in the fourth box.
The Code updates the total automatically as you ENTER numbers into cells, and overcomes "blanks", but I need it to update the total if you delete any of the three numbers.,
As shown below, I set the Code to "Exit Sub" if a cell becomes blank, but can't see how to invert it without going through the same "checking" process twice for the other cells.
As the Code structure is essentially the same for each box, I've just shown the first one here:
VB:
Private Sub TextBox1_Change()
If TextBox1.Value = "" Then Exit Sub [code]....
View 1 Replies
ADVERTISEMENT
Apr 22, 2009
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
View 9 Replies
View Related
Aug 20, 2013
I have 6 pivot charts within a document. I use a macro associated with a button to refresh the tables and therefore the data displayed on the charts.
However, each time I refresh the data, the 'data label' font size also refreshes. What is particularly odd is that 5 of the charts are pie-graphs, of those 5 graphs, the font size only resets on 4 of them (with the data labels in a single chart staying at my desired font size).
I can manually put the font size back to that which I desire but I'd rather it just didn't change in the first place.
I've had a look to see if there's any noticeable differences between the 5 charts but there's nothing which I can find.
I'd be happy to run a bit of VBA to set the font size as I want it, if there isn't a better solution.
View 1 Replies
View Related
Feb 28, 2009
I need to assign to a variable, the total number of text entries in col. A (or alternatively in a named range).
View 5 Replies
View Related
Jun 27, 2013
We have created a macro that basically looks for rows that contain an "H" and hides the row if it does.
Users can add new rows throughtout the year to this spreadsheet. and based on certain criteria, an H or U will be placed in a hidden column which the macro looks at and hides any row it finds an H.
The user has to click on the button that has the macro assigned to it once they have finished working on the spreadsheet.
The problem we're finding is that for users who insert/delete rows, once they click the button it takes up to 15 seconds to run through macro (which is ok). However, users who haven't added or deleted any rows and who click the button, they have to wait upto 5 minutes (which isn't ok) for the macro ro run.
We can't figure out why the macro takes longer to run when no changes have been made?
View 8 Replies
View Related
Dec 21, 2008
I'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies
View Related
Apr 8, 2009
I'm not sure what it's called, but in a workbook that was sent to me, when a cell is selected a text box appears with instructions in them. This is not a normal comment and I found that I cannot select it, right click it, or anything to delete them. They can be annoying as they cover up other data when the cell is selected.
View 2 Replies
View Related
Dec 13, 2013
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies
View Related
Oct 3, 2006
I have a question concerning Macros and the Disable/Enable prompt. My boss has a spreadsheet which has been used for years and he recently wanted to and did remove the macros from the spreadsheet (they were no longer necessary), but the disable/enable prompt still appears when the spreadsheet is opened. I replicated this in a test spreadsheet with a simple insert line macro and received the same results. Is there a way to remove the macros and the disable/enable prompt once they are removed? I know about setting the security to low to not see the prompt, but I would think that once the macros are deleted, the prompt should not appear any more.
View 2 Replies
View Related
Jun 6, 2007
I'm developing a series of schedules that organize building plans. In one schedule I maintain a list of areas (called spaces, like a lobby or a conference room). I programatically maintain the list of spaces in the schedule for sorting and other external functions that are irrelevant. In the process I occasionally delete a worksheet. My worksheets have 4 buttons and a combobox. Whenever I delete a worksheet with these objects, I lose ALL of my module-level variables. These include two collections, a boolean, and an integer.
I'll post only the code for now. If you want to replicate, remember to place at least one button or combobox on your worksheet. You'll need to execute each sub manually. I have placed debug statements to print the globals to the immediate window. Notice that the 3rd debug statement shows the globals as present when it's called from the delete routine; however, if you manually execute that print routine after the delete, the globals are gone!
Option Explicit
Const SHEET_TARGET_RANGE As String = "C13:K36"
Dim m_objLocal As New Collection
Dim m_objMaster As New Collection
Dim m_bln As Boolean
Dim m_int As Integer
Public Sub Debug_Populate_Globals()
Dim intLoopCounter As Integer
Set m_objLocal = New Collection
Set m_objMaster = New Collection
For intLoopCounter = 1 To 8
m_objLocal.Add intLoopCounter, CStr(intLoopCounter)
m_objMaster.Add intLoopCounter, CStr(intLoopCounter)....................
View 6 Replies
View Related
Apr 28, 2008
I need a formula that will show the total number of times "text" is entered into a column and when sorted by year that would only show the total for that year. The COUNTIF formula i'm using only works for the total, not when sorted by year.
View 9 Replies
View Related
Sep 18, 2013
EQJq7ZC.jpg
I have three columns of data (A,B,C) and I want to add a formula or script to create the data in column D. The 'XXX's are all numerical values and will vary.
Column D should be a sequential list, which restarts at 1 any time that either:
- the value in column A changes, OR
- column A stays the same, but the value in column B goes from something to nothing, together with the value in column C going from nothing to something (or vice versa).
View 1 Replies
View Related
Feb 26, 2009
I have a macro i would like to run whenever a user deletes a worksheet...
I would like the user to be able click as normal to delete,(ie. right clicking the tab and selecting delete worksheet, or selecting delete worksheet from the menu) but would like to run my macro when they select delete.
I am using excel 07 if that helps, or i could use another version...
My macro will save a copy of the deleted worksheet as xlveryhidden as a backup..
View 9 Replies
View Related
Aug 21, 2009
Complete List of People in Column AA.
Partial lists of these same people in columns A, C, E, G, I, K.
Goal: Once I put that persons name in A, C, E, G, I, K, I would like it to be deleted from Column AA.
View 9 Replies
View Related
Nov 25, 2006
I have a macro that deletes certain rows. I'd like the macro to tell me what it deleted specifically (if anything). Here's some of the macro:
For rownum = 1 To maxrownum
item = Cells(rownum, 1).Value
If item = "PUBS" Or item = "SWCDROM" Or item = "PC PACK" Then cells(rownum, 1).EntireRow.Delete
How do I get the macro to tell me if it deleted PUBS, SWCDROM, PC PACK, all three or nothing at all?
View 9 Replies
View Related
Jun 9, 2014
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies
View Related
Oct 30, 2011
i have number of cells as below and i need to make macro to check last character in each cells if text the result will be 0 and if number the result will be 1
A1 42SRY239Acd2
View 9 Replies
View Related
Jan 8, 2013
Macro works fine if i manually enter a time ie: 14:00 into cell a5 but it only sees a5 as text not as a time format how do i change it so the macro is looking for time not text entry?
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Application.ScreenUpdating = False If Target.Address = "$A$5" Then
Dim raceTime As String raceTime = Target.Value
If raceTime "" Then
[Code] ........
View 1 Replies
View Related
May 13, 2009
formula for -- If Text = 1 and Text =-1 adjust running total
example:
1312 (total)
SS1311 (new total)
LA1310 (new total)
LB1309 (new total)
LS1310 (new total)
LS =+1
SS, LA, LB =-1
View 3 Replies
View Related
May 16, 2014
I have a very large exported data base to excel. See the Attachment. I have columns on the left with text that needs to stay as text, and rows at the top with dates. These are my filters to sort and view my data. The current problem I am having is some of the quantities in the bulk of my spreadsheet are coming in as text that need to be converted to numbers (that stupid green triangle in the upper left hand corner). I already have developed a macro to format, sort, extract, and place the data so it's more manageable to look through. I need to get rid of this convert to number error before running this macro.
I am looking to develop a macro that will find each of these "convert text to number" errors and convert the text to number. So far I have been unable to find a starting point.
The sample attached is only 1% of the actual size of the spreadsheet, and my exported data base is variable in size.
The only solution I have at the moment is to go to the bottom of my spreadsheet, find the last error, and highlight everything above and done one convert to number.
Sample.xlsx
View 3 Replies
View Related
Mar 27, 2014
This is what I have so far.
Code:
Range("L:L").Select
With Selection
Selection.NumberFormat = "General"
.Value = .Value =
.NumberFormat = "0.0"
[Code]...
The .NumberFormat = "0.0" is newly added and doesn't work.
View 9 Replies
View Related
Nov 10, 2008
convert a column of text to number with macro.
View 9 Replies
View Related
Aug 9, 2006
I have a range of numbers stored as text. I need to convert them to long numbers using vba. I tried typing a simple number = clng(a2), but that didnt work. Can someone help me with A) the right formula and B) the proper end(xlUp) format.
View 9 Replies
View Related
Nov 14, 2013
In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".
I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.
View 6 Replies
View Related
Jul 9, 2009
I need a formula where by i can get just number with total in front from e.g cell D2 =148513 Total and E2 should result just 148513 and leave the rest blank which does not have total.
Layout
148513
148513
148513 Total
1578972
1578972
1578972
1578972 Total
View 5 Replies
View Related
Aug 14, 2014
I am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.
Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.
View 1 Replies
View Related
Apr 23, 2009
Col A Col B Mon Tue Wed Thu Fri Sat Sun Total
1000 Susan Y Y Y Y Y CountA(B6:B12)
899 Ted Y
1560 John Y Y
1000 Susan Y Y
etc.
I need to be able to total the number of Y for a given person
in a week as well as a total for the person over 4 weeks.
CountA works for the week But what formula would I need to count
for a specific person over 4 weeks. Col A is in random order. If the person
has no Y the answer needs to be blank and not N/A.
View 9 Replies
View Related
Apr 3, 2014
Here it is i needed to get the total of all negative and positive value.
View 2 Replies
View Related
Aug 7, 2009
I have a table with 5 columns and approx. 85-90 rows.
Column A has the Branch name in it e.g. Beavers or Bedfont (11 Branches in total)
Column B has User Type - Adult, Child, Guest (Adult), Guest (Child), Catalogue
Column C has Session Type - Booking, Drop-In
Column D has Total Session Time (mins) - which gives a number in minutes of the total session time used
Column E is not needed
I currently get a calculator and add up e.g all of the adult Bookings for Beavers and enter them onto a Report Sheet, then all of the Adult Drop-Ins for Beavers etc. I want an Excel Spreadsheet that will give me a total number for each so I can do away with the calculator.
I am thinking of creating a new sheet with a number of cells that have a formula similar to this
=IF(AND(A2="Beavers",B2="Adult",C2="Booking"),E2,0)
But I want it to see Adult, Guest (Adult) and Catalogue as the same thing / and I want it to pick up Child and Guest (Child) as the same thing.
View 5 Replies
View Related
Apr 10, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total. So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
View 2 Replies
View Related
