I want this private sub macro to change work in all workbook. How it possible?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.ColorIndex = xlNone
With Target.EntireRow.Interior
.ColorIndex = 37
.Pattern = xlGray25
.PatternColorIndex = 24
End With
End Sub
I am using Excel 2003.
I tried to change the number of new sheets in a new workbook, e.g. from 3 to 1.
But the option has no effect on new workbooks. They still show 3 sheets.
I want to write some code that runs everytime the workbook is initialized. I found out that the code should be placed in the following "Private Sub":
Private Sub Workbook_Open()
'My code
End Sub
I know that this code should be placed in the Private Module of the Workbook! I just can not find where is the Private Module of the Workbook in Excel 2007... =/
How to delete another excel private module of the Workbook Object (ThisWorkbook) VBA codes of the workshook event.
This code to run from my PERSONAL.XLSB
Sub Macro1()
Windows("Book1.xls").Activate
ActiveWorkbook.Vbproject
Don't know what other codes I need to put after this
End Sub
This code to be deleted via Macro1 above code
Private Sub Workbook_Open()
Call CreateMenu
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Call DeleteMenu
End Sub
I have a macro that runs through a list and stores elements to an array. If the element is not found in my list, it adds to the next available row and adds the value from the array to that cell. Right now, I am searching in column d but am storing the value of column a at that location. When I switch the reference to column D, the value is not inserted into my new list.
Here is my current code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long, lastrow2 As Long, insertrow As Long
[Code].....
Why does the code not work properly when I switch to D? The value is storing correctly in the array. I test this by the last line of the code and it executes properly.
I have set up a selection change routine which works if the cell has previously been used or if you make an entry and then change it again. I have tried to delete the empty cells 1st and then save the document, when opening the document it I enter a value in a previosly unused cell the change function does not appear to be called. There is an auto open routine that runs as well, there is more code in use but it fails at the start point.
VB:
Sub Auto_Open()
'
' Auto_Open Macro
'
'
Application.EnableEvents = True
[Code] ......
I have a Combo Box on a Work Sheet that the user selects a subject from. When the Combo Box content changes I need it to run a macro. Ive tried putting this in the WorkSheet file for the sheet
View 3 Replies View RelatedI am trying to change the caption of a toolbar item but for some reason it does not work.
Application.CommandBars("Format").Controls("Item...").Caption = "I&tem..."
However,
Application.CommandBars("Format").Controls("Item...").Delete
for example works just fine
I have some user defined function in an .xlam file that works.
Right now since that .xlam file doesn't auto open. I have a button on specific workbooks that will open that xlam so all the udfs work.
Is there a way to embed the udfs into a specific workbook so that workbook is a standalone without the need for opening a separate xlam file?
In MS-Excel 2007 dates seem to be limited to YYYY/MM/DD style, which I imagine there is a way to alter it into MM/DD/YYYY. I looked into MS Help, and a google search, and either I was using wrong keywords, or not, but I couldn't find anything to simply change date arrangement. If I am being unclear, I am talking about the function '=DATE(YYYY/MM/DD)' is what I want to change.
After I get that fixed, I need there to be a function to reproduce a 3-day work week (Mon, Tue, and Thur). e.g.:
10/05/09 [data] [data] [data]
10/06/09 [data] [data] [data]
10/08/09 [data] [data] [data]
Week 1 [data sum] [data sum] [data sum]
10/12/09
10/13/09
10/15/09
Week 2
10/19/09
10/20/09
10/22/09
............................
When I first open a workbook most of the functions don't work. for example the vertical scroll bar does not move. When I close the workbook and then reopen it for the second time it works fine.
Happens with any workbook I have.
The attached file contains data. In Worksheet 1 (and also 2 and 3) column B2 shows day, month, year, hours, minutes and seconds. I was hoping to convert this to just Hours and Minutes, but all the usual methods using Custom Format does not work. This leads me to think that its in TEXT format. How can I change Column B2 to Hours and Minutes?
View 14 Replies View RelatedI'm trying to get a Workbook.Open macro to work. I"m using the exact name for the location. For example:
Workbooks.Open ("O:AdministrationPM Weekly's2007PMWeeklyWE")
My other locations are working fine. For example I am using:
Workbooks.Open ("O:AdministrationDCS Week EndingStats"
I'm trying to open a file and perform various tasks. This is the structure:
Dim xlApp As Object
Dim xlWb As Object
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set xlWb = xlApp.Workbooks.Open(BackupFile) ' backupfile evaluates to c: esting est.xls
xlWb.Worksheets(1).Activate
Debug.Print xlWb.Worksheets.Count
Dim ws As Worksheet
For Each ws In xlWb.Worksheets
Debug.Print ws.Name
ws.Activate
Next ws
I think I'm totally missing something. The above works, except for the loop. None of the names show up in my immediate window, and none of the worksheets are activated. xlWB evaluates to nothing, which is where the problem has to be...but why would my first .Activate and Debug.Print lines work? Also, If I declare xlWb as Workbook then absolutely nothing works after the file is opened.
Basically what I want to do is open the file, do a bunch of a stuff with it, then save and close it. I have this all working without creating another object, but the opening of the file is still visible to the user. Seems like turning off ScreenUpdating doesn't truly work.
I have the below macro that works well
Sub Button68_Click() 'Creates delivery note
Dim stIDSelect As String
Dim stC As String
Dim C As Range
stIDSelect = InputBox("Enter RMA number you want to create a delivery note for")
If stIDSelect = vbNullString Then Exit Sub
Dim idRow As Range
Set idRow = Intersect(Range("A:A"), ActiveSheet.UsedRange).Find(stIDSelect)
If Not idRow Is Nothing Then
Dim i As Integer................
I recently upgraded from Excel 2003 to 2007, and the worksheet change procedure that i have embedded in my worksheet no longer fires when the criteria are met. If and if I fix it to work in 2007, will it still work in 2003?
Here is my procedure:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngCell As Excel.Range
If Not Intersect(Target, Range("C19:R19")) Is Nothing Then
For Each rngCell In Intersect(Target, Range("C19:R19"))
If rngCell.Value = "BLACK" Then
MsgBox "Please select a shading style", , "Shading Style Required"
End If
Next rngCell
End If
End Sub
I cannot run a macro because I am encountering error 1004, intersect of object. i am using a protected workbook, and I dont have the password to unprotect it, but it needs to be fill out using a macro from a different workbook. Is there a way around this?
View 1 Replies View RelatedI used vlookup function in cell C3 to find ID of employees in Sheet 1 in source workbook and then, I imported the Sheet 1 in master workbook.
The vlookup didn't work in master workbook. The cell C3 in sheet 1 that I imported is blank.
The original got the ID in cell C3, then I don't see the value in cell C3 in master workbook.
is there a a way to get an Array formula to work in a shared workbook? when this was put in the workbook It worked perfectly but I didn't think about the fact the workbook was going to be shared !
The formula is:
Code:
=LOOKUP("zzzzz",CHOOSE({1,2},"",INDEX(S$3:S$40,SMALL(IF(COUNTIF(L$3:L$38,S$3:S$40)=0,ROW(S$3:S$40)),ROWS(T$3:T3))-ROW(S$3)+1)))
I have a sumif formula in one workbook that relates to information off of another workbook...when the other workbook is open the information populates no problem when you close the other workbook I get the #VALUE error. Is this typical of SUMIF when referring to another workbook? I have a vlookup function that refers to the same workbook and it works fine when the other workbook is closed?
Well this excel workbook has lots of sheets each for a specific region eg, Europe, austin etc and also sheets which have relevant data that gets used in the formula.
Now, say for eg lets considered the sheet called austin.
it does the calculations on the headcount needed for call center.
so the columns refer to a formula called gets() which then calls the erlanc function.
Now the problem here is this gets() function takes a value called calc
and this calc just a cell in one of the sheets called table. Now if I change the headcount value in the austin sheet nothing happens. Then I need to change the value of calc cell say make it to 5 or 6 and hit enter. It starts calulating the values to forecast thye headcount, but it does so for all the sheets . so it is taking a lot of time.
how to get make it run only for one sheet.
I am encountering a specific scenerio where In I am creating a New file by copying one of the sheets And renaming that With todays date. here starts me problem when I try To share the sheet To work around I am seeing that th macro Is Not copying the sheet properly even though i have given PasteSpecial. The code goes here
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing Is Not transferred when copy/pasting, but Is If the keyword uses "quotes".
Sub Newsheet()
sheetname = Format(Now, "dd-mmm-yyyy")
MsgBox sheetname
sheet_count = Worksheets.Count
'Checking for Replication................
Using Excel 2010.
I've created a spreadsheet at work that has two summary tabs which contain hyperlinks to around 30 separate sheet tabs.
On each sheet tab there is a list of unique values in column A (and other information relating to each value in columns B to D which are repeated for more than one unique value). In column E, users enter a test script name against each unique value they wish to 'reserve', and the macro picks out the unique test script names and via the COUNTIF formula counts the frequency of each test script name for each of the different values in column B.
My problem is that the macro seems to work fine if the workbook is not shared, but errors if the workbook is saved as shared. The error is 'Run time error 1004 - Unable to select the MergeCells property of the Range class'.
Here is the macro code:
Sub Get_Policies_Per_Script(updCol As Long, ShtName As String)
Dim rowctr As Long
Dim tgtrow As Long
Const ppsformula As String = "=COUNTIFS($A$3:$A$65000,I$24,$E$3:$E$65000,$G"
If updCol = 5 Then 'test name column has been modified
[Code] ..........
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.
I have created a workbook with vb code that include 4 modules, 1 userform. These all work in the original workbook. When I copy and paste the workbook onto another laptop, none of the scripts work? Both laptops run the same os plus office 2003.
View 2 Replies View Relatedi need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedIn a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
IN SAME SHEET.
1. IS TO RESTRICT CELL POINTER. EG. HIT {ENTER} : COL(1) TO COL(5)
2. IS TO RUN PROCEDURE WHEN DATA IS INPUTTED IN COL(3)
THESE TWO SUB CAN RUN IN ONE SHEET ?
Private Sub Worksheet_Change(ByVal Target As Range) 'SHEET1
ActiveCell.Offset(0, 0).Activate
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean) 'WORKBOOK
Application.OnKey "{ENTER}"
Application.OnKey "~"
End Sub
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Target.RowHeight = 16
End Sub
[Code]....
How to Use 2 Private Sub Worksheet_Change