is does anyone know if there is a way of marking the y-axis in a chart with data from a table, so rather than having a fixed segmentation width have the distances between the data points marked on the Vertical to conform to a range in a spreadsheet? I know you can do that for the x-axis. Is there any way to do that for the y-axis as well?
View 9 RepliesI have a spreadsheet with golfers handicaps, golfers names down the left in column A in rows 3-35. Row 2 has the event numbers titles 1 to 18 (18 events in a year). i need a graph that has the person as the vert axis and the horizontal axis needs to be the event numbers, so i can read down for the person and across to see how there handicaps change from each different event. i have attached the data below.
View 1 Replies View RelatedHow can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View RelatedMy pivot table shows Towns as the Row headings and Month as the column headings. When I do a Chart, I get Towns on the X axis and Months as Y. I want the chart to show all my May data in a stacked column, then all my June data in another stacked column, etc. If I pick "Select Source Data" the options are greyed out. What's a mother to do?
View 1 Replies View RelatedI have a chart with percentages and most of them are >40% so I would like te values to start at 40 in the y axis but I would also want to have the 0% show (as it stands there is nothing there) It is a double y axis chart where the % is shown with just a dot and the other Y axis is the actual column. Im not sure if I'm making sense but I would just like to have the 1st value in the secondary y axis be 0 and the 2nd value be 40, and from that point forward scale in intervals of 5%.
So the values in the y axis are: 0%, 40%, 45%, 50%......
column chart displaying various pieces of data.
At the top of my worksheet I have a combo box which allows you to select a local authority name; and all relevant information in the worksheet is highlighted (using conditional formatting, extra series in charts to make relevant points highlight in red, etc).
I've added a series to the chart and changed it's type to line - then with the data labels positioned beneath the points on the line I can get conditional formatted x category labels - all outlined here: [url]
Because my x category labels are fairly long I've had to give them an orientation of -90 and make the minimum y-axis value equal to -200 to give enough room beneath the chart to fit the text in.
As I said above, the values below 0 are just there to provide space at the bottom of the chart, so my question is: is there a way to hide these negative values? I'm sure I've done it before, but can't remember how - I thought maybe a custom number format of #;[White]# would work, but it just inverted my text (white text on black background).
how I get the maximum and minimum values of the axis from and excel chart? What I mean is I want to specify a chart, and output in the same excel worksheet the values for the maximum and minimum of the two axis.
I have tried various searches, but cannot come up with the answer, although I have a sneaky suspicion it in here somewhere.
Why the recorded code doesn't work? I recorded the code below to format the Y-axis values of a chart with the recorder.
Code:
ActiveChart.Axes(xlValue).Select
With Selection.Format.TextFrame2.TextRange.Font
.NameComplexScript = "Arial"
[Code].....
Example attached : Copy of CAB.xlsx
View 2 Replies View Related how to link axis properties with a scroll bar (two scroll bars).
The idea is to be able to modify the maximum and minimum values for the axis in case there are outliers which might cause problems by analyzing the chart.
The Guideline in the scroll bar should be set to its maximum (all the way up) by Default, meaning that if there chart behaves itself well there is no need to change its axis values.
The same applies for the minimum guideline of the scrollbar but it should be sent all the way down by Default.
Two questions:
1) How do make values on x-axis as words? E.g. apples, oranges, etc.
2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.
I have some numeric data that has to be put on a log chart. but there is no option for log charts. so i converted my data to log and then drew a chart but i am unable to edit the axis intervals and starting axis value. whenever i change the value it gets back to its default value,ie 1. can anyone tell me how to draw log chart or how to edit axis intervals and starting axis value?
View 6 Replies View Relatedhow to incorporate another category and value axis to my existing chart.
1. I need to add a rank axis derived from my data column (C6-C15). This column should rank from highest to lowest and create a tie if any number is repeated. I have arranged the rank column in cells B38:L38 as they would appear. I would like this to appear on the top or bottom of the bar graphs.
2. Second I need to add the frequency of hits which = 3 derived from cell J1 This should appear on the chart were it is currently titled. This should create another bar graph colored green and labeled 3.
3. Lastly the numbers axis can remain the same as it appears on the chart or if it would be better to align as shown in cells B43:L43.
What is the best way to have both horizontal and vertical axis as value axis?
View 2 Replies View RelatedI got a set of data which is only 2 colums collecting data problems. The output i get is a time stamp and a fault. Im looking to set a chart up with the time been on the X - axis and number of problems per hour on the Y - axis.
View 7 Replies View RelatedDrawing Straight Lines In A Chart And Mark Intersections. I want to make a graphic like this in Excel.
View 7 Replies View Relatedhow to put the categories (Column H) out of the graph? (so more to the left, so not in the grey background) Here in the attachment you will see that the titles are in the graph instead of outside the grey background. Is it possible to do that?
View 2 Replies View RelatedI have some simple data and i want to create a horisizontal bar chart with 2 axis (X axis) the top one showing number of stocks number up to 270 and the bottom with Market Cap up to 1,200. (See attached). I set up the chart and it looks fine but it has only one axis so in order to create a second axis i right click on the blue series (no of Stocks) and go through the motions of setting up a secondary axis. However when i do that it ends up looking like the chart to the right with the Bars Cojoined (which is not what i want) I cannot seem to achieve 2 axis with separated bars
View 3 Replies View Relatedhow do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
View 3 Replies View Relateda_Y-Axis auto scale.zip
How to autoscale chart using VBA, so i can maximize the viewable area without using the default format axis on chart each time i paste new data to the table,
I would like to make a graph with an x, y and z axis. All of the choices that excel gives me are only x,y graphs. How can I plot a 3-axis graph?
View 9 Replies View RelatedI have a simple piece of code that creates a chart using the the values in column A as the x-axis and the values in column E as the y-axis. The values in Column A are all dates in this format: mm.dd.yyyy. However, when I collect the x-values they always appear as numbers (1,2,3). Even if I format the axis to Dates, they appear as 1.00.1900, 1.02.1901, etc.
Here is the code (also, I would like a VBA solution but if this is with excel's chart tools, so be it).
Code:
Sub Macro2()
ActiveSheet.Shapes.addChart.Select
ActiveChart.ChartType = xlXYScatter
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "=""Rate of Productivity"""
ActiveChart.SeriesCollection(1).XValues = "='Sheet1'!$A$2:$A$4"
ActiveChart.SeriesCollection(1).Values = "='Sheet1'!$E$2:$E$4"
End Sub
i want 0 values to start at x and y axis.
basically i want time in secs on x axis starting a 0 upto 4.4 secs
I have a dataset that looks like this ....
View 9 Replies View RelatedI am trying to create a column chart/graph with "Days Past Due" on the x-axis and "Quantity" on the y-axis. In other words, data from one column needs to make up the x-axis and data from another the y-axis where the bars will rise to meet that quantity. I was wondering if this is possible. I have not been able to find a way to make it work so far. I know there is a way to do it for a line graph through XY scatter, but I need a column chart.
View 6 Replies View RelatedProbably is in the wrong forum, let me ask a question to justify it being here. How can I force the y-axis min & max to be a particular number. If that isn't possible, how can I add a straight line to indicate the min & max?
View 2 Replies View RelatedHow can I turn this into a dual axis chart whereby it shows the number of current stores open (like it does right now) as a bar chart. But also as a line chart shows the store potential (%) - so for example, PSUN has 960 current stores and has a 96% store penetration rate.
View 9 Replies View RelatedPlease see the attached workbook.
I would like to create a bar chart which is linked to a drop down box (from data validation) that allows me to choose of the 3 sets of data to show in the x axis.
So if i choose "HALF YEAR", the bar chart will have two bars (one is "jan-jul" the other is "jul-dec") with the green section data if i choose "QUARTER YEAR", the bar chart will have four bars ("jan-mar", "apr-jun", "jul-sep", "oct-dec") with the blue section data if i choose "INDIVIDUAL MONTHS" i have twelve bars....with the red section data.
I have excel file and need to create a chart with X axis to be scalable, by selecting (from drop down menu) - start and end dates.
View 3 Replies View Relatedthe y-axis break between 0 and 0.8.
View 3 Replies View Related