I have a sheet here whereby if Bor No = 1, then total incurred should return as incurred. But if BOR No is more than 1, then the total incurred should sum up seq 1 and 2 of incurred. Bear in mind that seq no could be up to 4, 5, 6.. and it's not fix. But if BOR No = 0 or NULL, then total incurred should equal to "0"
View 5 Replies=AND($AE$2:$AE$10<=$F$2:$F$2000;$AE$2:$AE$10>=$E$2:$E$2000) With this I am checking for conditions to be true or false
Lets say I am checking AND(AE2 <= F2 ; AE2>=E2) this tells me if date in cell
AE2 is smaller or equal to Cell F2, but how can I set this fromula to check if all the cells from F2 to F1000 are equal to AE2 so If I write date into Cell AE2 it checks all dates from F2 to F1000 and check if condition is true or false
(and if I write date in cell AE3 it should check all the dates from F2:F1000, if date in AE3 is in this range)
i am trying to create what is probably a simple If statement for a worksheet formula i want to check to see if one of two cells have the text specified if so then the cell value is A4 from another sheet if not the cell containing the formula should be blank, something like below
=If(B1="on" Or D1="on",Sheet2!A4,"")
I also need this kind of formula with the AND operator, something like
=If(B1="off" And D1="off",Sheet2!A4,"")
=IF(H10=0,IF((R10-I10)>$AH$1,(R10-I10),0),IF((R10-N10)>$AH$1,(R10-N10),0))
I have a small issue with the formula above. Basically the sheet is used to input start and end time of shifts and create breaks and lunches accordingly. The formula above resides in column S. Basically it warns us if the end of the shift is over 4.00 hrs past the end of the last lunches. A shift can have no lunch, one lunch or two lunches. H10 would be the start of the first lunch, R10 is the end of shift, I10 is the end of the first lunch, AH1 = 4:00 or 4:00:00 AM, N10 is the end of the second lunch.
What happens is that if there is no lunch given in cells H, I, M, N or in this case H, I, N then I get a strange number. For instance, I put in 6:00 for the start time [E10] (actually we input military time and the result is displayed in AM or PM) and the end time as 8:00, then I get a result of 8:00 in the S column [titled +4hrs warning). 6:00 to 9:00 results in 9.00 hrs., etc, When we input a six hour shift, a lunch is automatically starts in H10 and ends in I10. Once this begins, the formula works correctly.
I have the data in this form
YYY
NYY
NYY
NNY
NYY
NNY
NYY
NYY
NYY
NYY
YNN
NNY
NNN
NYY
The output should check two conditions. If all three columns are "Y" then it should return value "Y". If any two columns are "Y" then it should return value "Y". or else it should return "N". Then the output should look like this.... The output column is colored in Red..........
I want to vary a for next loop, depending on the value of a variable (y). Is there a way of doing this without repeating code as in the example?
If y = 1 Then
For x = 1 To 100
' lengthy code changes Cells(x,1) characteristics
Next x
ElseIf y = 2 Then
For x = 101 To 200
'lengthy code changes Cells(x,1) characteristics
Next x
ElseIf y = 3 Then
For x = 201 To 300
'lengthy code changes Cells(x,1) characteristics
Next x
End If
I want to create a user form in excel that auto calcs the discount depending on customer type and no. of books purchased. There are two types of customer’s one individual and the other schools, library etc. The discounts are below
More than 50 books - 30%
25 - 49 - 20%
15 - 24 - 15%
5 - 14 - 10%
<5 - 5%
Individual
>25 - 25%
5 - 24 - 15%
<5 - 0%
I have created a form with option and text boxes to capture data but am really struggling with this as in my head I understand a set calculation will need to take place once relevant conditions are met but am really struggling to put it into code (yes I am new to this).
I have several rows with numbers that is either 0, a balance or a text like n/a. I need a formula that return true if all are 0 or contain n/a. If there is one balance shall it be false. Any suggestion? See example:
View 6 Replies View RelatedExcel file attached! I need a macro to do the following:
Start with cell F4 and read the increment value from cell C4. Then add this with F3 and display the result. Continue with the same increment until it reaches the value equal to cell B4. Then read the increment from cell C5 and do the same until value equals cell B5. Repeat the same step until it reach the value equals B7. I did manually in the column F4 to F28. Moreover, the cell increment will change according to the variable in A2. In this case it is 25 and got 25 values to fill the column R.
the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.
Column: A B C D E
Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)
What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.
Criteria 1
If any of the coulmn data contains a value less than .5 I need a 1 placed in column D
Criteria 2
If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies View RelatedIs there a way to make a cell populate certain text based on conditions of other cells without putting the formula in the cell you want to populate. So that someone could type other text into the cell if the conditions were not met?
View 14 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
I need to change the color of a specific cell when conditions are met in a different cell and it seems like it may be beyond the scope of simply applying conditional formatting. What vba code would look like in proper syntax to make the following statement true. IF cell value Q4 is >=cell value S4 AND cell value R4 is <100 Then cell Q4 turns red and IF cell value Q4 is >= cell value S4 AND cell value R4 =100 then cell Q4 turns green. it may also be useful to know that the "cell values" in this example will be dates and not straight values. this may be possible to do using conditional formatting, but i cannot find a formula that works.
View 2 Replies View RelatedI'm a Graphic Designer and am just starting to learn how much fun Excel can be. I'm still learning things though and this is an easy one I think, but I can not figure it out.
All I want to do is the following...
If there is any data present at all in column B on a particular row, then I want the number on the same row in Column D to be divided by 2.
In the example below... TB_5129-001 is present in B8. So I would want $45.00 (D8) to be divided by two automatically. Also, if B8 were to be blank i would want D8 to be left alone.
I have a worksheet with 3 columns in it. these are entitled "area", "uploaded" and "status". uploaded will be a numerical value and status will either be "awaiting signoff" or "completed" what i need to do is list all of the different areas and add the "uploaded" values together IF the status is completed.
View 4 Replies View Related"IF" formula. I want this in one cell but not able to do so :
If A1180, then Over Utilized, If A1=180, then Fully Utilized.
If the formula returns 0,1,2 instead of Under Utilized,Over Utilized, Fully Utilized respectively, I have no problems.
What formula would I use to count a cell only if it met one of three conditions?
ie only if the cell equalled 1, 2 or 3 but not 4?
I am creating a document log that tracks all excel files sent and received.
I use RDBmerge to get the filenames and data from the file batches.
My current macro edits the data down to the last stage of data needed to create the log.
My example workbook shows the final stage of the RDBMerge Data "Rough_Data" and then the final data formatted needed for the Log "Final_Data"
Included on the "Rough_Data" worksheet is the Code log used to complete the "Final_Data" worksheet.
I have highlight the cell range on the "Final_Data" Sheet that I need to complete.
filenames can occur multiple times from the RDBmerge, so only one occurance of the filename is place in column B of the "Final_Data" worksheet.
The criteria is this:
A column on the "Final_Data" worksheet as been Named for Each of the possible "Record Types" from Column G of the "Rough_Data" Worksheet. ("A,B,C,D,E,I,O,P,Q,T,V,W,X,Y")
I then must look through the "Rough_Data" worksheet for the first occurrence (if any) of that record type for each filename on the "Final_Data worksheet. If an occurrence is found I then must look at the "Unique ID" & "Program" Columns of the "Rough_Data" Worksheet. The key (on the "Rough_Data" worksheet) is used to determine the code that is written to the corresponding cell.
i.e.
"Final_Data"Date
FileName
Field2
User
Direction
Method
[Code] .....
I would very much like to automate this process, as sometimes I am dealing with over a hundred files with 30 plus rows of data each.
I am an Excel newbie and would like your help to develop the attached spread sheet. I would like the colour of cells A4 to H4 to change colour when the date in column B is plus 10 days and the same to happen to A5 to H5 so on and so on
I would also like the cells A4 to P4 to change colour when a quote goes to become an order an we enter data into J4 to P4 again the same thing to happen in subsequent lines as data is entered in the relevant line.
Basically I want a quote of 10 days or more to show as a different colour so that an employee can chase the quote. Once the quote become a firm order I want the cells to become a different colour again.
The code below turns numbers and dates on my worksheets(1) to text priorities on my worksheets(3), I now need to color the cell backgrounds of the results on worksheets(3). With formulas I know I can conditional format up to 3 colors (or 4 utilising the background) but I am after 6. I also know that you will look at my code and laugh as I should have done the color coding with the initial commands, but I struggled with it for 2 days and simply couldn't get it to work.
In the VB below it all works off a command button and up to the third color it works however it then gets stuck and throws up a runtime error '1004' Application defined or object defined error. I did get around this before by recording macros and effectively sticking them together but it hasn't worked on this occasion...... any ideas??? (I hope I'm not breaking any rules by pasting the code directly in?)
I want to highlight A1 red if C1 is greater than 55. Is this possible?
View 3 Replies View RelatedI need to create a macro that will calculate a value based on the contents of multiple cells. Looking at the example attached, if columns A and/or B (employee ID and name) are empty, then allowable OT (G) should be 0. If either have data, then if Stage (F) is CAN, G should be 20. If Stage is FAS or FAR, G should be 10.
I'm not very savvy with IF statements, which is how I imagine this can be done, and I don't know if this would be easier to do as a macro or as a formula within G. Since the contents of the of the cells will be changing on a weekly basis, I'd prefer the formula to only be there if there is content on the line, so we don't have nulls showing.
In my example booklet. I've got two sheets.
Sheet 1 has 9 inputs (rows) from 5 sources: A,B,C,D,E (columns)
Sheet 1 also has flag columns to match inputs based upon similiar values (names) in description columns.
Sheet 2 - has two tables,
first table matches values of different sources w/ similiar descriptions
onto the same row.
table two: displays, min. value for each row in first table ...
Attached is my worksheet. I need to program column C to adjust the value in column A according to the rules set in table J2:K17, but ONLY if the value in column B = mens. If the value in B does not equal mens, then leave the C cell blank. I've manually populated column C to show the end result that I'm looking for.
I tried a simple =IF(ISNUMBER(SEARCH("Small",A2)),"S",""), etc., but I can't figure out how to incorporate the additional condition that would let the cell return a value ONLY when a condition in B is also met.
NBVC helped me with a similar request previously, but with that formula, if the condition wasn't met, the cell returned "#N/A" instead of being blank.
How do I express in a formula if ce406= any one of the following results, then Yes, if not then No:
1 2 1 1 1 2
1 2 1 1 2 1
1 2 1 2 2 2
1 2 2 1 1 2
1 2 2 1 2 1
1 2 2 2 2 2
2 2 2 1 1 2
2 2 2 1 2 1
2 2 2 2 2 2
I tried the following formula, however, it did not give the desired result: ...
I am trying to build a spreadsheet that tallies hours worked and hours available for the next day. The key to this spreadsheet is the number 70. A worker can accumulate no more then 70 hours in an 8 day period, however after any day with no hours worked the rule resets to 70 hours available again. I have attached a sample spreadsheet so you can see how this should work.
View 9 Replies View RelatedI am seeking assistance with code for column H to be highlighted when I have a value of "Pending" or "Work In Progress" is present in column E?
View 3 Replies View RelatedI have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View Related