I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 RepliesI know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
I'd like to check if a user supplied string is single cell reference. My problem is that the below code comes back as vallid if I enter a range like B2:B4.
Sub test2()
Dim UserAdd As String
UserAdd = InputBox("Enter your address")
'check if valid:
If ValidAddress(UserAdd) Then
MsgBox ("it's valid!")
Else
MsgBox ("it ain't valid!")
End If
End Sub
When I use the following code, the spell check still checks the entire sheet. How do I have the spell checker on check a specific cell/range of cells?
Sub spellchecker()
Range("B7").CheckSpelling
End Sub
How a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.
View 9 Replies View RelatedWhat is the function to add numbers in a single cell to show only a single number. I know it can be done but do not know the quick function to do it.
View 10 Replies View RelatedI have a string of numbers like this:
378 398 308 978 397 328 078 307 908 278
And this code works fine except for I get a Type 13 Mismatch error on this line of code:
Code:
x = Application.Transpose(Split(my_cell.Value, " "))
Here is the entire sub:
Code:
Public Sub split_down()
Dim x As Variant
Dim my_range As Range
[Code]....
How can I adjust this for several lines of numbers like this?
378 398 308 978 397 328 078 307 908 278
390 327 928 678 392 907 208 320 927 178
608 394 207 578 391 920 108 607 395 324
508 321 168 107 325 924 568 507 341 921
167 345 925 518 567 351 941 160 945 517
560 951 241 245 510 251 516 451 388 338
788 988 337 088 778 339 377 288 330 998
And what is going on with this error. The first number string above should be placed in cell A1 when trying this code.
I'm having a hard time figuring out a solution for this situation. By the way I'm working in VBA macros. I need to check a cell for two things: if its empty or if it has something besides numbers in it. I know how to code the rest of what I need, but I'm just stuck on identifying if the cell has something else besides numbers inside it.
Possible entries would be "Isn't an enhancement" or "NOT A SIR", but I can't be sure those are the only things so I just generally need to check if there are any letters in that cell or not. One thing to note is that the contents of the cells are in text format and not number (the cell has a little green arrow in the top left that tells me about it). Any help would be appreciated, thanks in advance! Oh, just remembered, the number has to be 5 numbers long so I thought of using the Len() function but that doesn't cover things that are words under 5 letters like "None".
I am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L
(1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.
I have set up a spreadsheet template that automatically populates specific values through the spreadsheet based on what the value of cell "A1" is. I want to run through 224 potential values in cell A1 and print out the worksheet after each potential value.
My thought on how to approach it is to write a macro that:
1. Selects the next item from the drop down box in cell A1
2. Prints the page (using default print settings)
3. Loops
But I don't know what the code would be. Cell A1 also does not need to be a drop down box, as long as it incrementally runs through all 224 listed values and prints after each one.
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
Example:
Before : (Column "A" & "B")
Invoice NumbersTransaction NumbersInvoice NumbersTotal Transaction NumbersReceived Transaction Numbers
A2014000351501 A201400035150 3 2
A2014000351502 A201400035494 13 12
A2014000354941 A201400035881 12 11
A2014000354942 A201400035884 19 17
A2014000354943 A201400035888 14 13
A2014000354944 A201400037613 5 1
A2014000354945
[Code]...
Instead of doing this manually can we have the VBA to auto Update these missing numbers.
Here by i am attaching sample file.
I need find consecutive Numbers in a singles Cell but each numbers have a leading zero and "-" (Dash)
My problem is that the UDF that i found on this forum, is for numbers with out leading zero with comma ",",
So even if change the "," by "-", still getting a error Because the Code is designed to Read numbers Formats different than mine..
My Numbers are located in Cell G12 (down), and the message that i need to show in the cell result is :
If Found :
0 Consecutives --> 0
2 Consecutives --> 2
3 consecutives --> 3
4 consecutives --> 4
5 consecutives --> 5
2 Set of consecutives --> 2S
Example of 0 consecutives --> 01-04-07-12-25-30
Example of 2 consecutives --> 01-02-07-12-25-30
Example of 3 consecutives --> 01-02-03-12-25-30
Example of 4 consecutives --> 01-02-03-04-25-30
Example of 5 consecutives --> 01-02-03-04-05-30
Example of 2 sets of consecutive s --> 01-02-07-12-25-26
BTW my numbers start on Cell G12 down..
______G12_______
01-02-03-20-21-25
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F)
O contains a list of possible day combinations
P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
=VLOOKUP(A2,L:M,2,FALSE)....................
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3
I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
How to copy an entire column having numbers and words on every single cell into another column but only copying numbers, not words.
View 9 Replies View RelatedI am using Excel 2010.
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63
17
43
61
63
23,29,53,57,77,79
23
29
53
57
77
79
17,29,63,69,71,75,79
17
29
63
69
71
75
79
11,43
11
43
57
57
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
In need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies View Relatedhow would you do the following in excel 2007:
"SUM numbers within a cell based on unique strings in another cell".
For example, how would i use formula to SUM the following numbers (and only the numbers for david and sam only once), 700+454+50+40+2+129+16
700david
700 david
454john
50buch
40daniel
2sam
2sam
129mike
16steve
I have a macro that's supposed to see if cell 5 meets criteria and continue to all sheets in workbook, except " Total".
When I activate the macro on a specific page, it runs smoothly on that page. But when it's finished, it doesn't continue to the next sheet in the workbook.
Sub ColourBG()
Dim ws As Worksheet
Dim line As Integer
endline = Range("A1000").End(xlUp).Row
For Each ws In Worksheets
If ws.Name <> "Total" Then
With ws
For line = 3 To endline
Application. ScreenUpdating = False
If (Cells(line, 5).Value = "0206") Then _
Cells(line, 1).EntireRow.Font.ColorIndex = 5 '*(Blue)
Next line
Application.ScreenUpdating = True
End With
End If
Next ws
End Sub
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
When I enter a value for 'Number of Steps' from a drop down a table is generated with the x values changing accordingly.
For example:
Number of Steps 5
x x^2
------------
0 0
1 1
2 4
3 9
4 16
Number of Steps 9
x x^2
------------
0 0
0.5 0.25
1 1
1.5 2.25
2 4
2.5 6.25
3 9
3.5 12.25
4 16
You will notice that the number of steps is the number of x values that take us up to 4. The 4 is fixed. I would be able to work out the maths myself as I am a maths teacher but I was wondering how I could autopopulate the table based on a drop down box selection. If it involves going into VBA then don't worry my son needs to get to grips with what I have done.
Edit. The formatting does not seem to work above. On the left of each table is supposed to be the x value and on the right is x^2.
Need to write a code that gives a whole (from column B to column S) row a bold upper-boundary if that row has a value in column B?
View 2 Replies View RelatedI am trying to do with data validation, trying to stay away from vba on this... and it is probably very simple:
Cell A1, they can select Rice, Cheese, or Rabbit
I want to use custom data validation on B1, so that if A1 = Rabbit, they can only enter 1. If it is blank or the other two choices, they can enter 1 through 10.
Can I do that with data validation? I can't get any if thens to work in it.
The following code displays the message box and loads a userform if the Active cell offset 1, -1 when within G column equals "LAST ROW".
[Code] .....
How can I change it so instead it performs those same actions (displaying the message box, and loads the userform) if the number of rows between the last data entry in G and the last data entry in F is equal to 0?
I have a worksheet with 14 columns. Column 12 is either blank or when I finish that project, from a drop down menu I pick Yes. What I am hoping for is that as soon as I hit yes the line will be cut from the first sheet labeled Open and pasted to the next available row on the second sheet labed Closed. On the first sheet that blank row is eliminated so there are no spaces and on sheet two it always looks for the next available row as to not over write any data.
Also, to make sure I am doing this right too, I would right click the tab then click view code, paste it into the window (below the drop down that says (General) click file save workbook then file close and return to excel correct? One last thing, while looking at this page it shows my worksheet I call Open is really sheet 16 and closed is really sheet 17.
In my business I deal with a ton of different dimensions for my products. A lot of times the dimension will be within the cell as follows, "Product A 17x27 Brown", is in a single cell.
Is it even possible to write a code or formula that will find the "17x27" in the description, recognize it as a "dimension" and then run the formula that I need which is
I want to split the contents of a single cell(ALT Enter as delimiter) into multiple cells and retain the values in column B.
Ex:
A1: apple
banana
car
house
A2: yellow
B2: building
x
y
B3: O
Output:
sheet 2:
A1: apple B1: yellow
A2: banana B2: yellow
A3: car B3: yellow
A4: house B4: yellow
A5: building B5: O
A6: x B6: O
A7 B7: O