I have a workbook, with coding that opens many workbooks and performs several updates in each one, it seems that for some reason there is build up of memory with big files etc, is there a way with code that after each workbook has been updated and before the master workbook loads the next workbook for update that i can clear all memory, similar to closing excel down completly and reopening ?
View 3 RepliesHow come I keep having the same value for "lastrow". eg: 35
lastrow = ActiveSheet.UsedRange.Rows.Count
It doesn't matter how many rows of data I've changed, it still show lastrow = 35.
I tried to add an extra line above but still doesn't work:
lastrow = 0
lastrow = ActiveSheet.UsedRange.Rows.Count
I have 2 userforms (userform1 and userform2)
userform1 has a combobox1 (list of customers) with an commandbutton1
userform2 has many textboxes
when I click on the userform1.commandbutton1 - userform2 shows with textbox1.text being what was in userform1.combobox1
when i am done with userform2 and click close to go back to userform1, chose a different customer and click the commandbutton1, userform2 opens with the previous value.
how can i clear the previous?
currently when i close userform2 with commandbutton1 i use the following code
Private Sub CommandButton1_Click()
unload userform2
set userform2 = nothing
End Sub
I am currently taking over a workbook from a colleague that contains 10 pivot tables. Spaced out over a few sheets.
Each pivot table contains a lot of information and my current workaround to refreshing them all is..
Step1:Refresh 2 Pivots,
Step2:Save and Close document,
Step3: Re-Open document and repeat Steps 1 & 2 until all refreshed.
I was wondering if there was any kind of code to clear the memory space being used by the pivots thus leaving the hard coded information behind.
That way I can just write some vb to refresh all the pivots and not keep saving and re-opening the document which takes sometime as its on a network drive.
I experience "out of memory" error after previous vba code is successfully finished. So quick "solution" is to restart Excel.
My current PC configuration:
HP Compaq dx7300 Microtower
Intel(R) Core(TM)2 CPU
6320 @ 1.86GHz
1.58 GHz, 1,99 GB of RAM
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
I have some cells which are highlighted in column A.
I need VB Code to copy the whole highlighted row in Sheet2 as shown. Once it is copied then clear the highlighted cells in column A of Sheet1.
I got a code in internet that highlight a cell with equal value after double clicking a cell.
But my problem is I want to clear highlighted cell after clicking another cell (making double clicked cell inactive).
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim c As Range
Dim FirstAddress As String
Dim wksh As Worksheet
Static ColIdx
Cancel = True
[Code] ..........
I have a small workbook that copies 4 cells to a database list as per the code below, 2 of the fields activate a pop up calendar for date input on a button push the data is transfered to the sheet and the cells are cleared, however on the clear contents parts at the bottom of the code it reactivated the pop up calendar,
is there a way of not having this pop up when clearing the contents.
This code is supposed to clear the contents of row 6 cell if the contents of row 5 cell is blank/cleared. I get an error on the "If Intersect" Line. What's wrong?
View 4 Replies View RelatedI need multiple macros to copy information from sheet1 to sheet2 and another to copy the information from sheet1 to sheet3 and so on. need a total of 20 macros each to copy information from sheet1 and paste it to the corresponding sheet number. How to do it and this this is what i want to do, Copy roll A-B-C-D,and G but not E-F-H i have formulas that i don't want to clear or re-do every time it is possible to do this.
a B C D E F G H
HarvestDate VarietyL/P Code Label Pakagin Qty Total
1 12/2/2012 Soda 23 3
1 12/12/2012 plants 24 34
1 12/13/2012 socks 25 22
1 12/14/2012 shoes 26 22
1 12/15/2012 tie 27 22
1 12/16/2012 cds 28 22
1 12/17/2012 computer 29 22
1 12/18/2012 tapes 30 22
I have a Userform that exports data. I tried adding the following code to clear the export sheet each time and it crashes:
Set Popul = Sheets("Sheet2").Range(("a2"), Range("A2").End(xlDown))
Popul.EntireRow.ClearContents
Additionally I want to leave the top row as it has titles that will be needed.
I wonder if there is a way to clear event handler code in a userform programmatically?
Haven't quite managed it yet.
Something like:
dim x as integer
With ThisForm.CodeModule
x = .CountOfLines
For 1 to x
.line = ""
Next x
End With
Looking for some code to clear cells which are not highlighted
i.e. clear everything from row 2 downwards (Columns I:P) but exclude cells which are highlighted (not conditional formatting)
How can I create a msg box which ask's for Yes or no option before clearing a sheet with all contents?
if code is this:
Sub Clear_sheet()
Dim ws As Worksheet
For Each ws In ThisWorkbook.Sheets
If Not ws.Name = "master*" Then ws.Cells.ClearContents
Next ws
End Sub
Small piece of code to clear the contents of
Rows 33 thru 100 , then
Rows 142 thru 209 , then
Rows 251 thru 318 , then upto
Rows 43524 thru 43591 then finish
I have this code on a tab containing a series of dependent dropdowns. There are two dropdowns in each row, Dropdown2 being dependent on the choice in Dropdown1. This code replaces any contents of Dropdown2 with "Select..." if Dropdown1 changes. (Dropdown1 and Dropdown2 are NOT names, those are just the way I refer to them).
Code:.....
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
I have two separate workbooks, the first is called Job test and is to be used as a template for quoting jobs, the second is called Fixtures and is a database of fixtures that are organized in table. I keep them separate as multiple jobs will use the Fixtures DB workbook and I want to be able to update it and add new fixtures in one area. In order to facilitate this I have a macro that opens the Fixtures DB workbook anytime that the Job test workbook is opened. In the Job test workbook I have multiple dropdowns that I hope to make dependent or cascading by means of filtering the Fixtures DB workbook. The issue I have run into is with the following code.
Code:
Private Sub CLightType_Change()'Filters LampType
Workbooks("Fixtures.xlsm").Sheets("CLampType").Activate
Workbooks("Fixtures.xlsm").Sheets("CLampType").Cells.Clear
Workbooks("Fixtures.xlsm").Sheets("Fixtures").Cells.AdvancedFilter Action:=xlFilterCopy, CriteriaRange _
:=Workbooks("Job test.xlsm").Sheets("Criteria").Range("A1:A2"), CopyToRange _
:=Range("A1"), Unique:=False
[Code] ......
What this code hopes to achieve is that when I change the value in the LightType dropdown, the Fixtures DB workbook will automatically filter the data once to a different sheet(CLampType), then get only unique values for LampType in column O. I have set up a dynamic range for column O so as to populate my next combobox, LampType.
This should all be fairly simple and straightforward, however I am running into "Run-time error '1004': Clear method of Range class failed." when I try to execute the line to clear the worksheet, and also have an error when I try to filter the data via macro. The strange part is all of this can be done manually without a problem, and moreover I have tried recording the process and using the recorded version. Even stranger yet is that when I add an "on error resume next" before everything, the code works fine but keeps looping and acts finicky(I don't want to simply resort to this as a solution). I have also tried setting this macro up inside the Fixtures workbook instead and calling it from the combobox change, to no avail.
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
I have name 28 columns. The range in EACH columns is 6:14000, i.e. the first name is date and the range is from Row B6 to Row B14000.
I am using SumProduct instead of VlookUp to look up values. An example of one of my sumproduct formulas:
SUMPRODUCT(--(Date=$B$6),--(Book=$D$6),PnL___Book)
where the first columns has dates, the next column is bookname and the last column is the profit and loss for each book, i.e. the values that need to be addad.
Now, suddenly I do not get any numbers but just #VALUE! but if I change the range to a lot less, e.g. between Row B6 and B50, it works.
My questions is if this has to do with memory in Excel. Are there limits to how many formulas and how many names you can have before Excel crashes. I am aware that the 28 columns names are very large.
Are there any way of how to get around this, VBA-codes or other formulas that uses less power, not naming columns or what?
I have an excel sheet that has an onclose macro, and on certain computers i get an error message stating out of memory. can anyone explain why this is and how i could avoid it, by possibly clearing the memory first or something?
View 9 Replies View Relatedi have a spreadsheet on Excel 2000, which is 256 column's wide and 4000 long the only formulas are countif which start at row 1000-4000 and are copied to column 256. Just for the one sheet it is 14mb is this normal
View 11 Replies View RelatedI am currently using Excel 2003 to pull from 2 external spreadsheets to compile data. The first sheet (seniority list.xls) being referenced contains all of our employees (approximately 350 rows, but that can vary from 340 to 450) as well as some information (employee ID, full time or part time, etc.). The second sheet being referenced (pay.xls) contains a breakdown of all employees and their pay for a particular bi-weekly period.
What I'm looking to do is:
(1) Find out all of my current employees. I do this by referencing seniority list.xls.
(2) For each employee, find out how many hours they worked each week. I need to do this by referencing pay.xls. Unfortunately, that file works quite differently than seniority list.xls. Unlike the latter, which contains one employee number per row, pay.xls could contain as many or as few rows per employee as their schedule dictates. Each row contains things such as overtime, regular time, double time, alternate regular time, alternate OT, vacation, sick pay, etc. In total, pay.xls could contain as many as approximately 8000 rows. To determine how many hours they work, I'm using this CSE (array) formula:
(Note that the employee ID is in column A of the current sheet.)
I have a large amount of data on NBA teams and players that is extracted from external web pages. In order to have the data shown on separate sheets to do comparisons I have to use many array formulas and from what I have read that takes up a large amount of memory. I'm now at the point where I'm receiving a message that says "Excel cannot complete this task with available resources" when I open the workbook.
Is there any plausible way that I can resolve this situation? I have thought about converting the lookup formulas from arrays (index/match) to vlookups and hlookups.
I'm not as advanced with using Excel as most of you, and I realize I may be at a point to where I will need to use different software to analyze my data, but I would prefer to stick with Excel as it would be difficult to start from scratch and learn how to use a different program.
Using Excel 2007, Windows XP, 4gig ram,
I got this "Insufficient Memory .... close some application" message, once in a while.
I know that i got enough memory to run my Excel.
This is a random problem. Memory as been checked with mem86 and it work fine
Regarding the Memory Leak problem with ADO, does anyone know of a workaround?
The workaround mentioned on Microsoft's website (http://support.microsoft.com/default...;en-us;Q319998) pertains to using ADO to retrieve a recordset from an Excel worksheet, not from an Access Database.
1) Does anyone know if those workarounds would also address retrieving a recordset from an Access Database?
2) If so, is the "SELECT INTO" workaround effective?
Is this Memory Leak issue relatively minor or only affecting Excel 2000? I'm guessing it must be one of those 2 things since the concensus is ADO is superior to MSQuery..
I'm using a Dell P4, 1.6Ghz, 512Mhz of memory (Win2K & Excel 2003), and it's bogging on spreadsheets that aren't that big and complicated (compared to thing's I did years ago, in the days of 386's and Win98)...
It hits the 100% CPU usage and stays there for minutes (especially when saving) on files that are only around 2M in size, yet it's not using much of the memory...
Spreadsheets large or small seem to have little effect on how much memory is being used... is Win2K allocating a fixed % of total memory for Excel to use?... can this be changed, so Excel gets to use more of the available memory?
I've been cleaning up and redesigning my spreadsheets to make them more efficient, but there seems to be a disconnect between my hardware specs and Excel's performance with files that aren't that big ~:-/
Disabling my antivirus software (Nortons) prior to saving, seems to speed it up a little, but this is not something I should be having to do...
One of my apps I run is very large and memory intensive, and there are several subsequent procedures which tend to either bog down or errors out before the program finishes running.
Is there a way to clear the memory out?
And adding more physical memory is not an option, I have 4gigs already and Excel can only utilize 1gig anyway.
I have tried Tools/Options/Security Password to modify, but it can still be saved as a copy to the network which becomes very confusing to many. If I use Tools/Potect Sheet, I need to re-enter the password for all sheets twice. I am trying have it so that everyone is read only, select people can edit (with same password). Password protect all sheets and the workbook with the same password everytime when the workbook is closed
Basically 2 questions
1) Is there a way of remembering a password so that when the workbook is closed it and all sheets are automatically protected with the same password every time
2) Is it possible to have it not copied unless it is opened by an editor