I need multiple macros to copy information from sheet1 to sheet2 and another to copy the information from sheet1 to sheet3 and so on. need a total of 20 macros each to copy information from sheet1 and paste it to the corresponding sheet number. How to do it and this this is what i want to do, Copy roll A-B-C-D,and G but not E-F-H i have formulas that i don't want to clear or re-do every time it is possible to do this.
a B C D E F G H
HarvestDate VarietyL/P Code Label Pakagin Qty Total
1 12/2/2012 Soda 23 3
1 12/12/2012 plants 24 34
1 12/13/2012 socks 25 22
1 12/14/2012 shoes 26 22
1 12/15/2012 tie 27 22
1 12/16/2012 cds 28 22
1 12/17/2012 computer 29 22
1 12/18/2012 tapes 30 22
I am looking to create a macro to copy sheet Day(1) and call it Day(2). I would like Y3 to increase one day with the date, I would like Y4 to increase day and 1 and clear data from G35-G65.
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106. Example cell if cell H106 = D5:E102 then clear the value value only in cell range D5:E102 if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.
I have a workbook, with coding that opens many workbooks and performs several updates in each one, it seems that for some reason there is build up of memory with big files etc, is there a way with code that after each workbook has been updated and before the master workbook loads the next workbook for update that i can clear all memory, similar to closing excel down completly and reopening ?
I have 2 workbooks that I am working out of. Workbook number 1 is where the data is going to be saved from workbook number 2. I need to copy data from workbook number 2 but there are several road blocks. 1) I need to search for specific information in column E. Anytime information is listed under this colomun it is listed 2 times one on top of the other with a different peice of information to the right of each one. note that the items that I am looking for on this sheet will no always be there.
What to copy under E / F E F 1 BAR | $5,123 2 BAR | 24
Once the first "Bar" has been found, F1 & F2 need to be copied to workbook 1 to different locations on the active sheet. The names will always be listed together and the data will always be to the right.
I got a code in internet that highlight a cell with equal value after double clicking a cell.
But my problem is I want to clear highlighted cell after clicking another cell (making double clicked cell inactive).
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean) Dim c As Range Dim FirstAddress As String Dim wksh As Worksheet Static ColIdx Cancel = True
I have a small workbook that copies 4 cells to a database list as per the code below, 2 of the fields activate a pop up calendar for date input on a button push the data is transfered to the sheet and the cells are cleared, however on the clear contents parts at the bottom of the code it reactivated the pop up calendar, is there a way of not having this pop up when clearing the contents.
This code is supposed to clear the contents of row 6 cell if the contents of row 5 cell is blank/cleared. I get an error on the "If Intersect" Line. What's wrong?
2.xlsm is open. it contains a sheet called Report_P New_report.xlsx is open and has 9 existing sheets
Every time this tries to execute I get a "Run time error 1004 Copy Method of Worksheet Failed".
What is wrong with this code? I have an identical line in another macro, the only difference is that there are 5 sheets pre-existing, and that works fine.
I have to issue template workbooks to people for budgeting purposes.
Within the workbooks are various numbers of worksheets pre -formatted and ready for these people to enter data.
Some of the data in the worksheets is important to them as individuals but not to me so I have a series of macros that lift the information from the worksheets and put it into a worksheet more specific to me.
Because the users are on the whole not that good with Excel I have put in easy to use look up tables and various proctections to stop them adding or deleting rows or columns as this plays havoc with my macros.
There is one thing I have "so far" been unable to do and I wondered if anyone could help.
Is there a macro that I could put somewhere in the workbook which would detect when someone tried to cut and paste and would either put up a message box or stop them doing this?
The reason being they are cutting from one row to another and this is messing up the calculations which are protected.
Is there also a way to stop them changing the name on the sheet tab in the smae way?
I have a long header I am pasting to a column "A" on a new Sheet. When the header pastes it is repeating itself but with long blank spaces in between each repeat. The first time goes from A1 to A152, which is all I want. But it shows up again starting at A180225, and again at A212993, and again and again. I only want a single instance of the header in Column A. Here is the macro I am using:
Sub Sort_Cells() Rows("1:1").Select Selection.Copy Sheets.Add after:=Sheets(Sheets.Count) Sheets("Sheet1").Select Columns("A:A").Select Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _ True, Transpose:=True Selection.Columns.AutoFit Range("B1").Select End Sub
I am using column K and it looks up the length of this cell. When I created the formula I was using info that only went to line 234 which was fine. Once I clear the info in column K and input new info it can go further than line 234. How do I get the macro to look up the whole of column k without having to create a new macro each time?
I have this code on a tab containing a series of dependent dropdowns. There are two dropdowns in each row, Dropdown2 being dependent on the choice in Dropdown1. This code replaces any contents of Dropdown2 with "Select..." if Dropdown1 changes. (Dropdown1 and Dropdown2 are NOT names, those are just the way I refer to them).
I would like to have something that will auto run the code in Module1 when the Excel File is opened, but I do not want to code tansfered into the file when it is saved in its location.
I don't mind if the code is tranfered to saved file if in fact I can make sure the code is not run when the new file is opened...
Everything is working as intended at the moment, but when openeing the saved file the entire macro tried to run again. This is what I do not want...
I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2() ActiveSheet. Range("a1").Copy _ Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0) End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8) On Error Goto 0 If userInputCell Is Nothing Then MsgBox "Cancel pressed" Else Msgbox "You selected " & userInputCell.Address(,,,True) End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
I have got the following code to fill series and someone please help me that how to use this macro I can enter thses code in sheet1 on enter event and the result iwill be displayed in sheet2 and if any duplication in series then it is copied in sheet3....
I have two separate workbooks, the first is called Job test and is to be used as a template for quoting jobs, the second is called Fixtures and is a database of fixtures that are organized in table. I keep them separate as multiple jobs will use the Fixtures DB workbook and I want to be able to update it and add new fixtures in one area. In order to facilitate this I have a macro that opens the Fixtures DB workbook anytime that the Job test workbook is opened. In the Job test workbook I have multiple dropdowns that I hope to make dependent or cascading by means of filtering the Fixtures DB workbook. The issue I have run into is with the following code.
What this code hopes to achieve is that when I change the value in the LightType dropdown, the Fixtures DB workbook will automatically filter the data once to a different sheet(CLampType), then get only unique values for LampType in column O. I have set up a dynamic range for column O so as to populate my next combobox, LampType.
This should all be fairly simple and straightforward, however I am running into "Run-time error '1004': Clear method of Range class failed." when I try to execute the line to clear the worksheet, and also have an error when I try to filter the data via macro. The strange part is all of this can be done manually without a problem, and moreover I have tried recording the process and using the recorded version. Even stranger yet is that when I add an "on error resume next" before everything, the code works fine but keeps looping and acts finicky(I don't want to simply resort to this as a solution). I have also tried setting this macro up inside the Fixtures workbook instead and calling it from the combobox change, to no avail.
I have 10 separate files that each have a data input sheet. I have 1 master file that has all 10 sheets in it and an extra sheet to display all 10 sheets information on 1. The drama I am having with sorting the master sheet is that every cell in the 10 sheets has a formular to copy what in the corresponding cell within the separate file. So techincally, the cells are not blank.
The cells range is B5:G1004 on every sheet. I paste 'values only' from the range of each sheet into the master sheet, but when I go to sort column B Ascendingly, it puts all the data at the bottom of the rows and there is 10000 rows on the master sheet. I cant get it to flip around. What I need is a way to clear the cells on the 10 sheets that do not have a value before I paste into the master sheet.
I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
I'm using this macro to retrieve data from a worksheet within the same workbook. As you can see, I've set the destination range between row 12 and row 20. The problem is this code clears all text (not other formatting) from row 12 down even farther than the row 800 that is the end of my Origin range. QUE: How do you limit the reach of the ClearContents code?
Origin Name Range Definition = 'ORDERS 1st QTR 08'!$A$1:$J$800
Sub GetData() Application. ScreenUpdating = False Range("A12:J20").ClearContents Range("Data_Table"). AdvancedFilter Action:=xlFilterCopy, CriteriaRange:= _ Range("M1:M2"), CopyToRange:=Range("A12"), Unique:=False Application.ScreenUpdating = True End Sub
