Closing A Workbook Without Saving - Macro
Nov 28, 2008Need the VBA code to close a workbook, and not save it? I need it to open a workbook, run a macro, and close without saving. The code I have thus far is:
View 3 Replies
ADVERTISEMENT
Closing Workbook With VBA Without SAVING?
Nov 27, 2012I'm trying to close a workbook without saving it. But everytime I get the message box popupped twice.
These are the codes that I use:
VB:
Private Sub Workbook_BeforeClose _(Cancel As Boolean)
Dim YesOrNoAnswerToMessageBox As String
Dim QuestionToMessageBox As String
[Code].....
Closing The Workbook & Saving Automatically
Jan 25, 2008I have my Excel workbook open & have made changes. Now I close it and Excel prompts me if I want to save the changes. Is there a way to just close the workbook and automatically accept any changes without have the "Do you want to save changes" message appear?
What about if it is opened in read-only mode? Typically the workbook will not save any changes unless you save it off as another file name. If there is a solution to my question above, can it be enabled only when the workbook is opened in edit mode, or will it not auto-save changes over the file because Excel knows it was opened in read-only mode?
Lock A Row With An Entry In Col B On Saving Or Closing Workbook
Feb 15, 2009I have a spreadsheet for recording and summarising particular transactions. Column B records the date and Col C details the transaction type (from a data valdation list). Using conditional formatting the cell (in the same row) to whch the transaction value is to be entered is highlighted.
Other cells in the row contain formulas and are locked and the sheet is password protected.
On saving or closing the workbook I want to lock all the cells (used or unused) in any row in which there is a date in column B. How can I do this?
System Hang While Loading, Saving & Closing Of Workbook
May 25, 2007I have created a workbook for a quality check and it has about 50+ worksheets in the workbook, which contains data, formula,graphic & vba function. The size of the file is about 4890kb. It's works as planned, except, it takes about 1 mins ++ to load, save & even exit. Is there any suggestion to eliminate this issue, apart from creating a few workbook to accomodate the number of sheets/item in the project?
View 2 Replies View RelatedMacro Is Closing Wrong Workbook Before Going To The Next Workbook
Aug 12, 2009I run most of my macros out of a file called "Personal.XLS" and I have this bit of code at the end of this particular macro which is closing personal.xls instead of the active file it is working on. It is set up on a loop and it should go to the next file in the directory but since it closes the file I run the macro from, the macro stops immediately. It appears that it believes "ThisWorkbook.Close" is referring to the file from which the macro is initiated.
View 2 Replies View RelatedMacro Commands When Closing Workbook
Dec 13, 2011Is there a way (with macros, I''m assuming), to make my workbook always return to the Main tab and Save automatically --- every time somebody closes the workbook from any tab - so that the next person who opens the workbook will have it ready to go on the main tab?
View 5 Replies View RelatedMacro To Display A Message Before Closing Workbook
Jul 10, 2009how I would display a message to the user before the workbook is closed regardless if any changes have been made e.g.
Ideally there would on be an “OK” option only by way of acknowledgement and also no option to close the message by the ‘x’ in top right corner.
Macro For Closing And Reopening A Workbook Read-only
Jul 21, 2009I have a pair of macros that together close and reopen a workbook when the user clicks on a button labelled 'Refresh'. The reason for the macros is that any one of multiple users may have the workbook open for editing while the others have it open read-only, and those who have it open read-only will want to refresh it periodically to make sure they're viewing the most up-to-date version.
Now, here's the hitch. If I have the workbook open read-only and refresh it while no-one else has it open for editing, it doesn't reopen read-only (it reopens for editing). But I don't want it to reopen for editing (I want it to reopen read-only). Is there anything I can add to the macros to make the workbook reopen read-only, or is there a different pair of macros I can use? Here's what I have at the moment:
Macro 1
Sub CloseMe()
'
Application.OnTime Now, "OpenMe"
ThisWorkbook.Close SaveChanges:=False
'
End Sub
Macro 2
Sub OpenMe()
'
End Sub
Macro: Copy Cells To Another Workbook On Closing
Oct 31, 2006I have a worksheet template with details in cell A1,B1,C1,D1,E1,F1,G1,H1 & I1and when the sheet closes I would like to save a copy of the cell contents to a different workbook called transaction history, is there any way that vba code could write this to the workbook and when the transaction happens again, it then writes the new transaction data to the next row within the same workbook transaction history
View 6 Replies View RelatedChanging A Csv Format To Xls And Saving/closing
Jan 11, 2007I am trying to write a macro/program that will save a csv activeworkbook in xls and close it.
The workbook will always be a different name.
The files do not have an extension upon download and formatting.
ie stm0107 (Then they need to be saved as xls. Which is done manually at this time.)
Below are some trial and error attemtps. Thank you for your suggestions.
Sub CloseWorkbook()
Dim Filename As String
'Filename = Workbook.Name
MsgBox (ActiveWorkbook.Name)
Filename = ActiveWorkbook.Name
ActiveWorkbook.SaveAs Filename = ActiveWorkbook.Name(".xls")
'Filechange = Replace(Filename, "", "xls")
Application.DisplayAlerts = False
ActiveWorkbook.Save
Application.DisplayAlerts = True
ActiveWorkbook.Close Saved = True
End Sub
Saving Then Closing Causes The Loss Of Buttons For Macros?
May 15, 2014Whenever I save and close the attached, after selecting the NO on line 23, I lose all the buttons associated with my macros. If I save with everything expanded, no rows hidden, my buttons stay put.
View 1 Replies View RelatedClosing Workbook When Closing Userform
Sep 14, 2006I have a userform which opens when the workbook opens. Ideally Id like to have the userform open without the workbook coming up and have the workbook close when you close the userform. If thats not doable then is there a way to just close the workbook when the userform is closed?
View 3 Replies View RelatedMacro For Saving Workbook
Dec 24, 2007I Want A Code That Will Save My Workbook To A Specific File (different Form The One It Is Currently In) Using The Name That I Have Typed In Cell D13 In The Workbook
View 9 Replies View RelatedMacro To Close Workbook Without Saving
Jan 9, 2007i m designing a test for a school and want to add a macro that will be assigned to a button at the end of the test i want the macro to close down the the excel program running and not prompt the user to save the workbook is there a vb code that can do this i have tryed a few but they all come back object not found.
View 6 Replies View RelatedMacro To Import Data From One Workbook Into Another And Saving
Jul 3, 2014I've got a spreadsheet listing applications on PCs (assets), one line per application, and need to import that info into another document for each PC and save it with a file name which = the PC name (asset number). I've attached a couple of sample files to try to explain what i mean.For asset number PC037014 I need the corresponding fields filled and the list of applications pasted under where is says Additional Software List (inserting more rows if there are too many applications to fit in). Once the information has been populated, i'd like the file to be saved in a specific folder then move onto the next asset number in the list.
View 13 Replies View RelatedExcel 2010 :: Check If Cell Not Blank Upon Saving Or Closing And Color Code To Show Blanks
Aug 30, 2012Looking forward VBA coding for:
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save.
Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
Using Excel 2010.
Macro To Lock All Non-Blank Cells After Saving Workbook
Jul 23, 2014I have been searching for a macro that would lock all the non blank cells (cells that have any value/text) after the workbook is saved.
When the user clicks on save a message box should prompt stating that "The data you entered has been locked successfully".
Macro - Opening, Copying And Saving Workbook To Worksheets
Jul 25, 2008I have been trying to create a Macro that can do the following.
Open a Excel Workbook, Copy the Worksheets that I need (ignoring ones that are not needed.), Save them in the correct location with a new folder of date and time and saving them as csv files.
I have all the elements but can't seem to get them to gel correctly.
Just wondering if anyone has anything like this that I could adapt or edit.
Closing Workbook At The End
Aug 22, 2012I have a perfectly functioning piece of code. There is still one snag, however. In the process of running the macro, three new workbooks are opened. I would like to close all three of those workbooks at the end. I am using the following procedure for each of the sheets:
To open the worksheet
Code:
Dim wb As WorkbookMsgBox "Please select the Stakeholder File"SHFile = Application.GetOpenFilename("Files (*.xls),*.xls", , "Please select the Stakeholder Workbook")If SHFile "False" Then Set wb = Workbooks.Open(Filename:=SHFile)
To close the worksheet at the end:
Code:
If Not wb is Nothing Then wb.Close SaveChanges:=False
The only problem is that I am getting bugs when closing multiple workbooks (3). I have assigned the names wb, vb and ab to the three workbooks.
Before Closing The Workbook
Apr 19, 2006I have some VBA code which opens another workbook, copies data from the first sheet in there and pastes into the current sheet before closing the workbook it got the data from. Is there any way of suppressing any messages associated with closing the other workbook? i.e. do you want to save - or possibly automatically generating a no message to the prompts?
View 3 Replies View RelatedReminder When Closing A Workbook
Jan 11, 2007I have 4 employees who at the end of their shifts have to email me an excel workbook. The issue is that some of them are forgetful and after placing numerous post-it notes on their monitors one particular employees just forgets.
What i want to do if possible is that when the workbook gets closed, a pop-up window shows up on their screen reminding them to send the workbook. Even better would be if their was a button that they could click that would email the workbook as an attachment in the pop-up box.
Closing A Workbook Created?
Mar 25, 2014I've created a macro which copies the current tab to a new workbook (Book X):
[Code]....
I then manipulate the copied data in Book X. Once this is done I move the manipulated sheet back into original file
[Code] .......
The problem i'm having is I'd like to close the newly created Workbook X file once the macro has run but Workbook X is usually called Book2, Book4, Book7, Book32 etc.
Workbook X will always be the previous file if i use the ALT TAB shortcut.
Pop-up Message Appear When Closing Workbook
Dec 6, 2007Is it possible to pop up a message when closing the workbook?
if so, could the message only popup if a certain cell is negative?
For example, This is what i would like to happen.
When workbook close is activated:
If cell A1=(-20), then pop-up "Please check your work and correct".
else, close workbook
Closing Workbook & Excel
Jun 26, 2009How do I SAVE and CLOSE Workbook and it's instance of Excel.
I have other instances of excel open that I do not want closed.
I thought that I had this before, but I can't find it if I did. I do keep a list of all the requests where I ask for help and it's not in this list.
From Userform / Other Workbook Not Closing
Nov 26, 2013I wrote this macro where, from a userform, I click a button and it will fillout another form with certain data from the original WB to a different WB.
All is working fine and exactly the way I want it except, it won't close and save the other sheet. It will go back to the userform, as I want it to, but it will leave the other file in the background open.
This is the code:
Code:
Private Sub CommandButton6_Click()
'Allocation file fill out
Dim alloc As String
Dim allwb As Workbook
Dim ABA As Workbook
Dim Prompt As String
'Dim fd As FileDialog
Set ABA = ThisWorkbook
[code]....
Closing A Workbook That Is Open Via VBA
Jul 2, 2008Well I seem to be having an issue in a form i created. What happens is that when the user clicks a button it saves a worksheet of workbook as its own file, problem is that it will actually open the new worksheet as a workbook when I really just want it to save without opening a new instance. Here is the code
Dim IntWirefilename As String
Worksheets("Intwires").Select
Worksheets("Intwires").Copy
IntWirefilename = "International Wires Database"
Worksheets("Intwires").SaveAs FileName:="File Path" & IntWirefilename & (".xls")
Workbooks("File PathInternational Wires Database.xls").Close
I think the problem lies in the last line or it could be from the select and copy part.
I do not want it to open a new file after it saves it. Also can anyone help create a part that will bypass the overwrite existing file thing so that this file will just continuously save as the same file name rather than prompting the user constantly to Overwrite the file.
Prevent Closing Of Workbook By Top Right X
Nov 20, 2007I need to alter the Close command on the title bar (the 'X' on the top right corner on the blue bar of excel)
Is there any way to alter the close button on the title bar to have it call a sub I created instead of actually closing excel?
Creating New Workbook / Copying Sheets And Saving Workbook - Subscript Error
May 30, 2014Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
Prevent Closing Of One Workbook When Two Are Open
Sep 23, 2009I'm trying to prevent a user from closing a perticular workbook.
Here is some important factors.
Workbook(A) = "LA-01-04-10" This is only one of 52 other but only one is open at a time.
Workbook(B) = "LA.xls" Always the same name and is always opened when one of the workbooks(A) above it opened.
When workbook (A) is opened it will then open another workbook (B) at that time the window is hidden workbook(B) So the user can only see workbook (A) I have a button on workbook(A) that unhides the window to show workbook(B) After the user completes his work in Workbook (B) they need to click another button that sorts the list and returns them to workbook(A) (Which also hides the window for workbook(B).
The problem is I have users that are trying to close workbook(B) instead of pressing the sort list button. So what I want is to prevent the user from closing workbook(B) by displaying a msgbox saying they need to press the button.
Ive tried several approches to this but I'm still having problems. The below script works if workbook(B) is active or shown. The message is displayed and the workbook will not close. However if the user is in workbook (A) and trys to close the message is displayed and both workbooks close like they are suppose to. But why is the message displayed?
One other note I should say is that not only does workbook(A)Open workbook (B) but it also closes it. Which may be why I'm having problems?
I have also included both workbooks so you can see all the code.
I have this code in Thisworkbook of workbook(B)
