Following link explains how can format negative percentages.
[URL]....
Following code makes negative percentages red, positive percentages green.
[Code].....
I want to make; negative percentages red, positive percentages green, zero percentages blue, ---------->This is my question.
Attached File : Color Format.xlsm
I need to get a percentage, whether it is negative or positive or 100% of goal for column E (for ie. Chardonnay would be +168%; CS would be -61%). Everything I have tried from previous posts just brings me to a % sign in column E with no number.
Shipment Goals thru January
%
Actual Shipments YTD
(+/-) Percent of Goal(Col E)
Cases Needed to Order
Chardonnay
0
100%
168
[code]....
I have to calculate percentages, lots of them,, have 4 scenarios
1.- positive / positive
2.- positive / negative
3.- negative / positive
4.- negative / negative
I wish to find a formula that covers all scenarios, have thousands of data to calculate
I've hit a wall for the first time in my excel using career, I’ve searched the net high and low, asked the guys in my IT department and am so far stumped for a solution.
The problem is thus:
I have 3 columns, A, B and C.
Column A and B contain two numbers. Column A is "telephone calls offered" Column B is "Telephone calls Answered".
Column C is a calculation of the percentage of calls NOT answered. The formula I am using for this is =(A1-B1)/A1*1
This gives me a % as an answer.
Rows 1 to 66 are different time periods through out the day.
The problem is that for some fields, we don’t receive any calls, at all. Or we receive a call in one time period, and it is answered in another.
so Lets say cell A1 is 0, and Cell B2 is 3. Or A2 is 0 and B2 is 0.
How is it possible to get excel to display 0% if, after the calculation the value is < or = to Zero?
I have tried the below "IF" function but it returns a #Value error
=IF((A1-B1)/A*1<=0,"0%",(D67-E67)/D67*1)
I now leave it to the capable hands of the anonymous internet gods of excel
I am using the below to open a text file and copy the used range to my working workbook. The opening of the file makes the code slow and and also it may be bcoz i am trying to paste 11800 lines of data from one file to another.
Also i can see the flickering of the screen when the files are open. How to make the code faster and more efficient.
Code:
Sub readSimFile()
Application.ScreenUpdating = False
'//code//
Application.Calculation = xlCalculationManual
[Code] ......
I need a formula to create the following:
In Cell F5 is 26, so the percentage should be 101% (100+1). How can I modify the below to add 1% when the number goes over 100%?
Do I have to create two columns? one for the below and one if the F6 is over 100%?
IF(F6="N/A","N/A",IF(F6>=25,1,IF(F6>=19,0.8,IF(F6>=13,0.6,IF(F6>=7,0.4,IF(F6>=1,0.2,IF(F6
The below code looks in a certain column and deletes rows based on values less than the entered value in the input window. The problem with the code below is that it does not remove rows that have negative numbers. There is the possibility of a negative number being in the column so I would like to have that removed as well.
What would the code look like to add to the current code to remove the rows that have negative numbers? -1, -2, etc.
Sub Delete_Part_Input()
Dim Qty As Integer, i As Integer, ans As Variant
Qty = Application.InputBox("What total quantities would you like to delete? Note: This is the value located in the C column.", Type:=1)
If Qty = 0 Then Exit Sub
ans = MsgBox("All totals with a quantity of " & Qty & _
" or less will be deleted." & vbCrLf & vbCrLf & _.............
Am trying to get the sheetcalculate to be triggered and execute VBA code when a formula changes its result from positive to negative. The code works fine if I trigger it with a command button click. Auto Merged Post Until 24 Hrs Passes;
View 2 Replies View RelatedI have a worksheet in which the values in cells B8, H37, H42, H48 and H49 must be negative. Occasionally the values get entered as positive numbers.
I would like to use VBA code to automatically change the value from positive to negative.
It appears that the WorkSheet_Change event could be used to do this but I don't know what code to enter into the Sub.
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedI wrote a code that is suppose to save the workbook every time a change is made but so far I have been unsuccessful at getting it to work. The workbook contians 7 worksheets.
This is the code I wrote to try and accomplish this task ....
I have read through numerous posts, but cannot get one thing to work. I am using Excel 2003, and am trying to get a calendar to pop up, to select a date, and then return that date to Cell B2.
I was successful at making the calendar pop up by the following methods:
1. Added a button to the toolbar, and assigned the Calendar Macro to it.
2. Using VB, added a sub-menu item to the right-click (context) menu, using the code below.
Private Sub Workbook_Open()
Application.OnKey "+^{C}", "Module1.Macro2"
End Sub
However, my goal is to make the calendar appear when I click on cell B2.
I tried using the following code, but when I click on B2 nothing happens.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Address = "$B$2" Then UserForm1.Show
End Sub
I also tried:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Excel.Range, Cancel As Boolean)
With Worksheets(ActiveCell.Worksheet.Name)
If ActiveCell.Column = 2 Then
If ActiveCell.Row = 1 Then
UserForm1.Show
End If
End If
End With
End Sub
I'm helping out a community that puts out a role playing game by making a character sheet for their gaming system. It's normally a pen-and-paper type affair, but a few people have reached out to me and asked me to make it. Now, one thing that I really thought would be nifty would be to make it persistent. I know of the Excel basics, creating basic formulas and the such, but this is where I hit a brick wall.
For the character sheet, they normally have basic attributes on a 1-20 scale. These attributes are accomanied by a bonus. The only thing is those, while these bonuses go across a linear path (For attribute 1, it's -30, for 2 its -20, for 3 its -10, for 4 its -5 for 5 its 0....), I cant seem to figure out how to create some kind of If/Then formula for it....
Heres my example:
Brad makes a character that has a score of 9 for one of his attributes. The bonus given to someone with a 9 is a +10. What I'm looking to do is create a table that sees that 'If (c9)=9, Then (d9)=+10'...
And my second related issue...
Is there any possible way to do the above mentioned formula in relation to a drop down selection bar? It's the same thing here; To break it down simply, It would be excellent if there was a way for it to say If (a10)=Warrior, then (c10)= +10.
See attached document. In cell G4 i need a format which will make the cell green, amber or red depending on the values in Cells I7 to I9.
3 Greens = Cell G4 to be green
2 Greens, 1 Amber = Cell G4 to be amber
2 Greens, 1 Red = Cell G4 to be red
I want to set a conditional formatting rule that makes a cell red or green depending on if the value in the cell is larger or smaller than the value in another cell +2% or -3%. If neither of these conditions are met no formatting should be applied..
a) In the cell (R104) where the condition is set I have the following formula:
=if(BP104=0;"";BQ104/BP104) (the values in BP104 and BQ104 is retrieved from a database)
b) The conditions I've set in R104 are the following
1) =isblank($R$104) (condition: "nothing")
2) =$R$104<$R$106-0,02 (condition: "red")
3) =$R$104>$R$106+0,03 (condition: "green")
c) In cell R106 the value there is a value of 90%
The conditions seem to work fine when the value in R104 is higher or lower than the conditions set in 2 and 3 above but when the value is blank in R104 the cell goes green, which it shouldn't.
I am importing a .txt file into Excel that has two columns of dollars and cents. When I do my subtotals, all subtotals should be zero. Some of the totals show as 0.00, some as (0.00) and some as a dash which is what I would like for all of them. I have tried: ...
View 9 Replies View RelatedI have data that comes from a subsytem that places the negative sign at the right of the number, so it is recognized as text. I can get around this using find and replace and then a second step to multiply that by -1, but is there a formula that can do this for me?
I was trying if(right(A1,1)="-",TBD,A1)
I have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
View 7 Replies View RelatedI have an (organization) work book that contains departments in different tab with each department having its own tab. In each tab is the employee name, dept manager, dept number and emp number. In the CoverSheet (main sheet) I want to put the department numbers in a drop down menu.Upon selection of a department number i want to Look in the whole workbook to see where the department number is, pull up the department head and all the employees in that department with their employee numbers
The reason for this is that I want to be able to add a button to delete/edit to be able to edit employee details centrally from this particular (CoverSheet) sheet and update the relevant sheet.
Also put in an input box to add employees and update the relevant tab (department)
I have a (phylogenetic) matrix with a species in each row, and morphological character in each column, scored as 0, 1, 2, 3 or 4 for each different species, so something like the following but much bigger:
Character 1 Character 2 Character 3
Species A 1 0 1
Species B 3 2 2
Species C 1 2 0
I want to identify the minimum combination of different columns (i.e. their values, but also which columns) that make a particular row unique.
Trying to design a check that makes a user insert an integer between 0 and 90. So far I can use this:
View 3 Replies View RelatedI would like to do a routine in VBA on excel 2007 that makes the following:
1- When the mouse is over a cell it pops-up a window that shows a picture;
2- When the pointer is removed from the cell the window that contains the picture closes;
It is very important that the picture that is shown be adressed by a relative path from the folder in which is the excel file.
The pictures can change; this is the reason that the picture should be addressed by a path.
I have searched and have not been able to find an answer to this question so it might be a little unique possibly. I have an ActiveX combo box that I am trying to do something with. The text that I want to appear in the combo box is already there and I did this by creating a list and referencing it to the combo box. So the combo box has the following four items in its drop down:
Boat
Car
Plane
Walk
Now the part I cannot figure out is how to make a selected value appear in another cell based on what was selected in the combo box. For example, if boat is selected in the combo box, then I want the value 25 to appear in a cell. If Plane is selected in the combo box, I want the value of 100 to appear in a cell. For walk 5, and for car 22. I know this can easily be done with data validation and a validation drop down list but I do not want to use that but need to have a combo box do it instead. I just don't know if it cannot be done as a list or not and have experimented with INDEX but not having any luck there. I do not want to use any macros for this either. Basically I am wondering how I can make my combo box work just like data validation drop down menu bar with formatted values outputted into a cell.
when we insert a jpeg image into a excel sheet the font on that page looks fuzzy.
View 2 Replies View RelatedI know ASAP has a feature to do this but I need the code in a bigger macro that I wrote.
EX: -1 needs to be 1
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedAll sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies View RelatedI am working with a list and would like to show the top 10 careers in %.
Out of 914 votes __ % are interested in Nursing, __ % are interested in ABC, ___ % DEF, etc.
i have a figure of 395.00 euros to start and need to calculat percentages when i enter a certain figure ...
View 8 Replies View RelatedI think a really easy no brianer, I need to find the difference in percentage terms of two values. I am using =(B2-A2)/ABS(A2)
where B2 = 24.09
and A2 = 21.08