I have data that comes from a subsytem that places the negative sign at the right of the number, so it is recognized as text. I can get around this using find and replace and then a second step to multiply that by -1, but is there a formula that can do this for me?
I was trying if(right(A1,1)="-",TBD,A1)
I have a colum of positive and negative numbers I want to sum all the numbers regardless of the sign. Example
-1500
8000
-2500
4000
=16000
I can not work in another colum or covert the negative numbers in another colum then add them up.
I need last cell to read 16000. What formula do I need?
I am looking for a formula to do the following:
In Tab 1, I have a negative number and the word "Original" next to it. In Tab 2, I have a mix of positive & negative numbers. I want all numbers that are negative to display the word "original" and all positive to display" new." How do I do that? Also, I want the opposite to work as well-- if Tab 1 has a positive number, I want all positive numbers in Tab 2 to display "original."
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
View 5 Replies View RelatedIn an excel column listing monthly payments, I cannot report a negative value . I need to "carry forward" the negative value by automatically adding it to the next positive cell in the column. This process should loop through the column leaving no negative numbers, leaving a zero in any cell where the negative number was originally and balance out to be the same amount as the sum of the original listing of monthly payments.
View 4 Replies View RelatedI have created a Pivot table from a source data file that includes a document status column ('Type I Or C') (I for Invoice & C for Credit) and an Invoice / Credit value column (Invoiced Price). However the values for both invoices and credits are positive so when summed distort the total values.
I am attempting to create an additional column within the Pivot table to convert the credit note values to negative by inserting a calculated field under the formula tab, i.e.
=IF('Type I Or C'="C",-'Invoiced Price','Invoiced Price')
The above formula works fine in a standard worksheet but it is not reckonsing the "C" within the pivot table. If I manually change the value to numeric (i.e. 1 for Invoices and 2 for credits) it works fine, i.e =IF('Type I Or C'="2",-'Invoiced Price','Invoiced Price')
so it appears to be an alpha issue?
Have the following numeric values:
-3.46
103
0
6.2
I would like to convert (not format) them to
the following 14-byte text values:
-0000000000346
+0000000010300
+0000000000000
+0000000000620
I use currency data pasted from legacy program that pastes dollar values followed by a C or D to represent debit and credits, ie -- 1,000,000.00C or 1,000,000.00D.
Is there some way to remove the letter and correctly format the value to a negative or positive number on a whole worksheet or column?
Currently I am doing this manually one cell at a time.
I have this data source file that comes from a back office program, and basically what i want it to do is to turn the number negative in column C when the header of that column in column A is WITHDR and leave it positive when it is CONTR. What i was thinking was that it could go to column A from column C and go up each cell until the cell is not a date and multiply the column C number by -1 depending the column A header equals WITHDR and do that for every cell in column C, but I dont know how to proceed, im new at VBA.
View 8 Replies View Relatedis it possible to display the value in a cell with a £ and also make it automatically go red when the sum is negative?
View 9 Replies View RelatedI have a cell that always requires a negative currency number.
No doubt I will inadvertently enter a positive number now and then.
Is there a conditional format method or something that will take my cell entry and always change it to negative?
The report generated from our co. software in excel have negative figures suffixed as "-" for ex., payable shown as 21373533-
- The value is treated as text in excel
- How should i Bring the negative sign for this type of data as prefix
when there is huge data and also in a columnar manner.
I have a column of numbers which have the - sign at the back end of the number instead of the front. What would be the easiest way to turn that into a negative number without manually keying each one?
View 4 Replies View RelatedI have data starting in E7. I want it to go down the column and find the negative numbers. If it finds one then I want it to change the number in the row to the left of it to a negative. So if E67 is a negative number, make D67 a negative and so forth down the line Sounds "simple" but how do I do it?
View 7 Replies View RelatedIs there a simple way to convert a positive number to a negative number ?
Fromto
10(10.00)
56(56.00)
116(116.00)
Additionally, would the same procedure work for time?
So if I had a column listing hours that looks like this:
10:05:00
4:34:00
2:18:06
is there a way to convert this to negative hours? Understandably, there are no such thing as negative hours, but I am trying to illustrate a situation where an internal procedure was completed x amount of hours before the specified start time.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI keep getting the correct answer, but it returns it as negative and I need a positive answer.
View 1 Replies View RelatedI wish to convert a negative figure Ie (-1,500) to positive. How do i go about it?
View 2 Replies View RelatedI have this report that comes as a text file.
It makes negative numbers look like 1245.35-putting the - sign at the end. I need some way to make these negative numbers look like -1245.35. Only these negative numbes need to be re-formatted.
I am looking for a conditional formula that can be applied to a cell so that when I enter a number with a positive value, it:
1) Converts it to its negative equivalent value.
2) Displays in the value in the cell with parentheses around the number to indicate that the value is negative.
I am trying to do this without having to reference another cell to provide the entry or display the outcome.
I have a column of numbers such as
1001150
1001124
2224445
I need add a period in the following locations
10011.50
10011.24
22244.45
I figured this out using a format rule of
#.##
I then need to make the numbers negative so I did
-#.##
but this doesn't "stick", if I filter the numbers by negative numbers, none of them show up. So how do I make the formatting actually become the numbers? Auto Merged Post Until 24 Hrs Passes;After doing some more research I found the "precision as displayed" option. I can't find this option on Excel 2007, but I moved the files into 2003 and the option doesn't do anything. It is not permanently changing the column that I have added the formatting too.
I know ASAP has a feature to do this but I need the code in a bigger macro that I wrote.
EX: -1 needs to be 1
I'm trying to sum negative numbers using the following formula, however for some reason it's not working in the way that it would if I flipped the < to a > sign.
=SUMPRODUCT((Data!$AB$10:$AB$3222=$C$58)*(Data!$L$10:$L$3222=D57)*(Data!$W$10:$W$3222
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
View 3 Replies View RelatedI have a very simple formula which is basically one cell minus another "=A1-B1".
When the values are equal, the cell this formula is in will display a zero. However, when the subtracted figure is greater than the first figure, i will then get a minus figure E.g. 10-11 = -1.
How can i make it that when the formula result is less than zero (i.e. a minus number) the figure displayed stays at zero but still using the minus funciton? Basically once it hits zero i need it to stop subtracting. This may be really simple but i cant figure it out.
I want to key-in positive numbers, which I really want Excel to interpret as being NEGATIVE numbers. In other words, I want to avoid repeatedly striking the MINUS key. How do I:
Format these Data-Entry cells to this?
Format these Data-Entry cells to return RED displays?
I'm using Excel 2000
I have constructed an inventory formula, subtracting Current Inventory (CI) from Required Inventory (RI), to generate a number of how many new products must be Ordered: RI-CI=O. The problem is that if CI exceeds RI, I get a negative number for "O".
Question: How can I structure the formula to give a zero for any sum less than 1?
I understand how to only sum negative numbers but my problem is pulling only certain ones from a list. I have tried numerous IF and SUMIF statments with no solutions. I have attached a worksheet showing what I am trying to do.
View 5 Replies View RelatedI used this code to extract the value on the text: "11/09/09 backyard $400"
=IF(ISNUMBER(SEARCH("back",A4)),RIGHT(A4,LEN(A4)-FIND("$",A4))+0,"")
and return "400" but i've encountered a value which is negative (could be
-$400, or ($400); and i got an error of #value, could anyone resolve this problem?
How can I find the inverse function of sine and also how do you find powers
to negative numbers