How to automatically change the colour of a cell if another cell is a certain colour.
For example, if Cell A is red, then Cell F also needs to be red.
If there a way for this to automatically update?
I would like the following to occur in an excel spreadhsheet:
If in Sheet1 Cell M98 is manually highlighted in Yellow (Not conditional format) then on sheet 2 cell range M84:M76 will also be highlighted in the same colour.
Cell M98 colour will only either be blank (no fill) or Yellow. If M98 is blank then the cell range M84:M76 would also be blank.
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies View RelatedI am looking for a vba where by the default colour of the font for new text typed in any cell of a workbook change to green or red and the default black automatic becomes secondary. The existing text in the workbook in its existing font colour must not change i.e stays in black or red.
View 1 Replies View RelatedI am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View Relatedwhich will calculate value of a cell when one of the variables has been changed?
To illustrate what I have in mind, an ecxample:
* User can add values to cells using UserForm
- Component name (to Cell "A1")
- Component price (to Cell "B1")
- Component quantity (to Cell "C1")
[Code]....
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
Using 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies View RelatedIt is possible to add something in a spreadsheet VBA to colour a cell Green and put a box surround on it if the cell = "Closed" from A7:V65535
Basically I have four conditions for status of a task and i can only use 3 formats on conditional formatting so i need some code to format the last remaining status type which is "Closed"
Got this part of code to make it the correct colour
With Selection.Interior
.ColorIndex = 4
.Pattern = xlSolid
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
I need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies View RelatedI am trying to make the colour of cell change depending on the result in an adjacent cell and have found and adapted the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("x4:x202")) Is Nothing Then
Select Case Target
Case 11
icolor = 43
Case 21
icolor = 43
Case 31
icolor = 27
Case 41
icolor = 27................
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I am trying to have one cell automaticall input infromation based on another cell. For example, if A1 = 10, then I want B1 to automatically equal 20.
The formula I am using in B1 is as follows - =if(A1="10","20","")
I have 2 problems though:
1st - I don't want to put the furmula in any cell because other information is put in there also. I tried putting it in conditional format but I don't think it is meant for such usage. Also, I already have something in data validation. so I can't put anything there because to my knowledge you can only put one validation per cell.
2nd - I have multiple numbers (around 7) that I need to be automatically inputed along the columns.
I have VBA code that changes the cell background colour in column A based on criteria in column B. What i want to do is select a cell in the same row in a range column O:AB and change the background colour to the same as column A. This action is for rows 4 to 41.
Basically i just want to click in a cell and for that cell's background colour to change and match the colour in column A.
I have a cell (A2) which has a large formula in it but eventually returns a number between 1 - 5.
I want to add colour to the cells based on the number.
So, in column B2 i want to have a formula that says
=If (A2 = 1, blue, If(A2 = 2, Red, etc..)
I have data in table-1, in current shape
Table-1
B C D E F
Adda Zakeera 1239987801310037
Ahmed Pur East 5559998803310042
Ahmed Pur East-2 8888874805510041
Arifwala 3545555805510045
Bahawalnagar 3336666802610046
Bahawalnagar-2 1257777806610038
Bahawalpur 2206666804410044
Bhakkar 2223333805610042
I want to arrange my data like Table-2. I have tried vlookup() formula, it worked but every time I puldown the formula I have to manually increase cell # (e.g) In the row of Adda Zakeera, I have 4 values. When I use vlookup() and drag it downward the values should be shown as in Table-2 under Adda Zakeera.
=VLOOKUP($D$2, Sheet1!$B$4:$AF$90,2,0)
Table-2
D E F G H I J
Ahmed Pur EastAhmed Pur East-2 Adda ZakeeraBahawalnagarBahawalnagar-2BahawalpurBahawalpur-2
555 888 123 333 12548 2201#N/A
555 888 9987 333 77777 66666#N/A
In the Yellow Cells, I am looking for a formula or Macro that will automatically recognise and give the correct Premises number. As an example, in the first block of Yellow cells, it should be MOR001&2; The second block should be MOR003 and so on...
One could copy and paste the Premises number for each premises, but with 100 entries or more, it becomes a tedious and time consuming task. An autonomous function to recognise the correct premises number would be much easier
In the end, this is to be used when drawing up a PIVOT so that one may easily pick up a premises number or numbers and their related charges
I have a cell that has a formula in it- "=IF(C13="","",VLOOKUP(C13,DATA,2,)).
Right now it works fine and returns a value of either "NANN" or "HZ". Which is fine.
But, what I would like it to do is, if the result equals "NANN", I would like the result to display "BURLINGTON". Or, if the result equals "HZ", I would like the result to display "CONOCOPHILLIPS".
I have a worksheet with the following in Column E and F respectively:
ID Name
100 aaa
100 bbb
200 ccc
200 ddd
200 eee
300 fff
400 xxx
500 yyy
500 zzz
500 kkk
500 lll
500 mmm
When I input an ID number in Cell A1 and if it is found in the above table, it should bring all the names corresponding to that ID in a cell comment.
The ID Number is repeated in the above table because the names in Colum F are the dependants name for that particular ID.
Below is a formula i am using on a spread sheet. What I would actually like to do is instead of the cell showing "OOS" if the statement is false, I would like it to show Z11 but in bold red so it stands out.
=IF(AND(Z11>=35,Z11<=45),Z11,"OOS")
I am using
Range("E9").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
This colours the cell that colour (36) how do I say to take the colour in the cell already?
