# Combine SUM And Return BLANK Statements?

May 25, 2013

If the cells are left blank I need the SUM column to remain blank, not return 0.

Combine :SUM(F9:BR9) + IFBLANK, return BLANK, not 0

## Nested IF Statements: Combine The Two Statements

Oct 14, 2009

How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?

=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)

OR

=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)

## Four IF Statements To Combine

Jan 29, 2014

I need to write IF statement with 4 criteria, or at least I think IF will do the trick. It would be difficult and not very visual to describe my question here, therefore I have attached a dummy workbook with the comments. Basically I have got 2 values in 2 columns. Next 2 columns will hold letter "x". There are 4 possible variations how "x" will appear in those two columns: first, second, both or none. So depending where the "x" is, I need to return one of the 2 values.

## How To Combine Two If Statements

Feb 13, 2009

What I want that cell Q4 displays:
1) When the current date is larger than the date in O4 AND is smaller than the date in P4 than say "Update!"
- When the current date is larger dan P4, say "Expired!"

Every other scenario the cell must be blanc.

To do this I have made two seperate formulas:
1) =IF(AND(NOW()>=O4;NOW()P4;"Expired!";"")

How do I combine these into 1 cell? I have tried allmost every combination, I'm ready to throw my monitor through the windows

## Combine Two If Statements

Oct 28, 2009

Is there a way to combine two if statements below.

IF(I2=0,J2*-1,J2)IF(I2

## Combine 2 Sets Of If Statements

May 15, 2008

I have 1 original and 1 new IF statements, but need to combine into 1. Is this possible?

Here are my IF statements:

=IF(I15="WSP - DT",I29,IF(I29=0,IF(I30=0," ",+I29+I30+I39+IF(I25=0,0,(I25-1)*1900)),I29+I39+IF(I25=0,0,(I25-1)*1900)))

=IF(I13="Base Suite",IF(I15="Self Serve - Web",AK81),IF(I13="Base Suite + Key Account Advantage",IF(I15="Self Serve - Web", AK84),IF(I13="Key Account Advantage (Stand Alone)",IF(I15="Self Serve - Web", AK87))))

The names in " "s are set up in drop downs.

## Combine Multiple IF/AND/OR Statements

Oct 16, 2009

If my input page B13 is either New Lease In-House or New Lease w/Co-Borker andmy input page B43 is - then take cell D57 in my Analysis report, mulitply it by cell B32 from Input page and divide it by 2, otherwise, take cell D57 on the analysis report, mulitply it by B42 on Input page and divide it by 4. I think I have a mess up with my brackets. This is what I have: =IF((OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker"))AND('Input Page'!B43="-",'Analysis Report'!D57*'Input Page'!B32/2,'Analysis Report'!D57*'Input Page'!B32/"4")

## Streamline And Combine Into One 3 VBA Statements

Oct 20, 2011

At the moment I have 3 statements that i would like to streamline and combine into one. I would like to just press commandbutton1() and do the whole process rather than having 3 steps. Can I combine or I am better off doing it the way it is now?

Code:

Private Sub CommandButton1_Click()

'Prepare exports
'Delete cells and find and replace Y

Sheets("byemployee").Select
Rows("1:7").Select
Selection.Delete Shift:=xlUp

[Code] ........

## Combine Multiple If Statements With OR

Jun 15, 2009

=IF(VLOOKUP(B3,'Rep List'!\$E\$1:\$I\$10000,5,FALSE)=OR("BH","AC","#N/A",0),VLOOKUP(C3,'Rep List'!\$A\$1:\$C\$1000,3,FALSE),VLOOKUP(B3,'Rep List'!\$E\$1:\$I\$10000,5,FALSE))

I'm getting the "#value" error - the vlookups are working independently

## Multiple Condition IF Statements (combine Them Into One)

Feb 1, 2009

I have 4 IF(AND) conditions that work fine separately but I can't seem to combine them into one.

=IF(AND(H56="New",I56="RE",Q56<=5),”YES”,”NO”))
=IF(AND(H56="New",I56="NON",Q56<=1),”YES”,”NO”))
=IF(AND(H56="Renew",I56="RE",Q56<=3),”YES”,”NO”))
=IF(AND(H56="Renew",I56="NON",Q56<=2),”YES”,”NO”))

## Sumif Statements To Return Zero Instead Of N/A?

May 8, 2013

I am trying to use a SUMIF statement to sum values off of 3 seperate tabs. My issue is that the ID's used are not on each tab. Is there a way to return a ZERO if the ID is not found on the subsquent tabs?

=SUMIF(Sheet1B:B, A1, Sheet1E:E)+SUMIF(Sheet2B:B, A1, Sheet2E:E)+SUMIF(Sheet3B:B, A1, Sheet3E:E)

## If/then Statements: Find All Blank Cells In Column

Oct 24, 2007

I am manually scrolling through Excel right now to find all blank cells in column L. Some cells have dates, others are blank. IF L is BLANK, I go to row K and copy/paste row K to row L. IF K is BLANK, I got to row I and copy/paste to row L.
Is there a statement I can put into row L to basically say "If blank copy/paste from row K. If row L and K are blank go to row I and copy/paste to L." ???

## Multiple If Statements And Searching Blank Cells

Apr 2, 2014

How can I create a multiple if statements that returns a specific response if the cell is blank?

For instance, =if(K6=[date],"Carry Out"), if(K6=[blank],"Break Out"))).

## Combined If Statements - Make The Second Character In The Blank Cell?

Mar 6, 2014

I have a spreadsheet that i want to create a part number that contains 4 parts. Ex 1rl9. The cell i want this to be in is blank. What formula do i use to make the second character in the blank cell = r?

## VLOOKUP - If Table Array Is Blank Need It To Return Blank?

Mar 27, 2014

I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?

## Combine HLOOKUP And VLOOKUP To Return One Value

Jan 2, 2014

I need a formula that will combine hlookup and vlookup to return one value.

## Combine/merge Row Cells Text Between Blank Rows

Jun 14, 2009

I have a large list of text in one column which i need to combine between blank rows into one cell or a new column, the number of rows to be combined varies.

for example

aa
bb

ww
xx
zz

rr

gg
hh
ii
jj

would become

aa bb
ww xx zz
rr
gg hh ii jj

I have over 30000 lines so doing it by hand is not an option.

## Return Blank If Concatenating With Blank Cell?

Apr 3, 2014

in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.

## How To Combine Selected Items Of List And Return In Cell

Aug 22, 2014

I have a global list in B column and I want to create a text about the list. If I put "1" in A column, I want my text to be on B11 for the selected items. So excel should do a loop for the selected range and combine the selected items in a new line and give me as an output.

You may see the picture Untitled 1.jpg

## Multiple IF Statements (skip The Next Two Statements Or The Result Will Be Changed Again)

Nov 22, 2008

I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.

## If Statements; List Any Date That Has Three Or More True Statements With The Coresponding Name

May 26, 2008

Sheet one will contain the following:

DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill

On sheet two I need to list any date that has three or more true statements with the coresponding name.

EXAMPLE:
2/23/2008Phill
2/26/2008 Bill

## Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing

Jun 25, 2009

Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....

## If Two Cells Are Blank Return Blank - If One Has Date Subtract Today Date

Apr 24, 2013

Using one spreadsheet with three date columns and two columns counting days.

If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval

Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)

If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval

Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4

## Macro To Combine Cells In A Row To 1 Cell While Skipping Blank Cells

Jul 2, 2014

I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.

See attached workbook : Work Order Summary Sheet.xlsxâ€Ž

## Macro To Combine Cells In Row To 1 Cell While Skipping Blank Cells

Jul 17, 2014

However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;

input:

blank 3-x Blank 1-y blank 2-z 1-k

output:

1-k 1-x 2-z 3-y

## Return Blank Or Zero

Apr 26, 2009

Clolumn D will always have a positive value, Column N sometimes will be zero.

using the formula =SUM(N6-D6) returns a negative value if 'N' is zero. I would like to return a blank cell or '0' if 'N' is zero.

## Return A Blank Response

Jan 4, 2009

if cell a24 has nothing in it how can i make sure a77 is blank at the moment it returns a zero

## Formula For Blank Return

Mar 5, 2009

=IF(Q20+R20+S20>0,Q20+R20+S20,"")

V20
=SUM(T20*O20)

V20 gives me #VALUE

How can I have V20 blank if T21 is blank?

## Return Blank Instead Of \$0.00 In Sumifs

Feb 26, 2010

Shortened for example;
I have created a drop down list with gas, groceries and travel as the categories.
column a is labeled expenses and formatted as currency.
column b is labeled category with the drop down list in each cell.

column d contains each item, gas, groceries and travel on separate rows.
column e will contain the total for each item in column d using "sumifs formula".

If there are no travel expenses, instead of returning \$0.00 I want the cell to be blank.
I know how to do this in a simple sum function but sumifs are sumthin else.
I have tried using <> for not equal to and everything else I can think of and I usually get a VALUE error.
how do I get it to be blank instead of \$0.00???

## Vlookup: Return The Value 0 If G6 Is Blank

Jan 20, 2008

I am using the formula : =VLOOKUP(G6,\$R\$8:\$S\$16,2) which is fine however i want it to return the value 0 if G6 is blank.