Sumif Statements To Return Zero Instead Of N/A?

May 8, 2013

I am trying to use a SUMIF statement to sum values off of 3 seperate tabs. My issue is that the ID's used are not on each tab. Is there a way to return a ZERO if the ID is not found on the subsquent tabs?

=SUMIF(Sheet1B:B, A1, Sheet1E:E)+SUMIF(Sheet2B:B, A1, Sheet2E:E)+SUMIF(Sheet3B:B, A1, Sheet3E:E)

View 2 Replies


ADVERTISEMENT

Consolidating Lists And Nested SumIf(AND / Countif(AND Statements

Jun 10, 2014

I am trying to produce a report of supplier transactions sorted by area code. I have a spreadsheet of data consisting of Supplier Code, Supplier Name, Transaction Amount and Area Code.

I want to be able to firstly seperate the transactions by area, then also consolidate the data so it shows one row per supplier with total amount spent on that supplier and a transaction count on that supplier. I know how to sumif the transaction total and countif the transaction count.

However I have problems consolidating the suppliers in to one row per unique supplier and I also have problems nesting an AND statement in to the sumif/countif statements. I need additional criteria in the forumula to only count transactions in a specified area code.

I've attached an example spreadsheet to make it alot clearer. See results sheet in this workbook.

View 3 Replies View Related

Combine SUM And Return BLANK Statements?

May 25, 2013

If the cells are left blank I need the SUM column to remain blank, not return 0.

Combine :SUM(F9:BR9) + IFBLANK, return BLANK, not 0

View 3 Replies View Related

Sumif To Return An Intersection

Jun 24, 2006

I have the following data sets

worksheet1

TRANCODES 234568 .........99
PARTS
003-0623-00
005-0030-00

worksheet2

PARTSTRANCODE SUM_QTY
003-0018-01 28 10
003-0018-01 40 10
003-0021-00 8 25
003-0021-04 4 63

In worksheet1 I need to compare the part number and the trancode then
return the quantity from worksheet2 -

View 14 Replies View Related

Sumif Return The Specific Value Based On The Lookup

Sep 21, 2009

I have attached an example. I am wondering how I can get [K2] to return the value 501 based on the lookup.

View 7 Replies View Related

Sumif: Return The Contents Of The Respective Cell

Nov 5, 2009

In Column A, in each cell in rows 1-10, there is various text that may or may not include "ABC" and "DEFG" as the first four letters. In Column B, rows 1-10, there is numerical data. What I would like to do in Column C, rows 1-10, is place a formula that would return the contents of the respective cell in Column B, but only where the first three or four letters in the respective cell in column A is "ABC" or "DEFG".

View 9 Replies View Related

Multiple IF Statements (skip The Next Two Statements Or The Result Will Be Changed Again)

Nov 22, 2008

I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.

View 2 Replies View Related

If Statements; List Any Date That Has Three Or More True Statements With The Coresponding Name

May 26, 2008

Sheet one will contain the following:

DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill

On sheet two I need to list any date that has three or more true statements with the coresponding name.

EXAMPLE:
2/23/2008Phill
2/26/2008 Bill

View 4 Replies View Related

Nested IF Statements: Combine The Two Statements

Oct 14, 2009

How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?

=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)

OR

=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)

View 2 Replies View Related

Formula- To Pull Cell Values Similar To A SUMIF Function (SUMIF(range,criteria,sum_range))

Oct 25, 2007

I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.

View 9 Replies View Related

Nested SUMIF Statement Or Multiple SUMIF

Sep 17, 2009

I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.

I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.

View 6 Replies View Related

SUMIF In A Column: The First Instance Of Each SUMIF

Apr 21, 2009

I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.

And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.

In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.

View 5 Replies View Related

SUMIF And SUMIF Not - Using Two Formulas In One Cell

Feb 27, 2012

I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula

=SUM(AH3,X3:AC3)-AD3.

Is there anyway to merge these two formula's?

View 2 Replies View Related

If Statements That Have 11 IF Statements

Aug 9, 2007

My formula is not working correctly; not sure what to do. I use this same formula with numbers and it seem to work, but only have 8 IF statements as well. This example below doesn't even work with only 8 IF statements.
--------------------------------------------------
What I am saying below is = If E3 = a swat team (i.e. EO-Deal Processing-Prescreen) then please enter "Chumbley" and so on. For anything else put an na or n/a for blanks or swat teams that I haven't lised in the criteria.
---------------------------------------------------

=IF(E3="EO-Deal Processing-Prescreen",Chumbley,IF(E3="EO-Deal Processing-DocGen",Chumbley,IF(E3="EO-Deal Processing-Events",Chumbley,IF(E3="EO-Deal Processing-Triage",Junk,IF(E3="EO-Deal Processing-Processing",Queck,IF(E3="EO-Deal Processing-Calcs",Doyle,IF(E3="EO-Deal Processing-Closing",Terry,IF(E3="EO-Deal Processing-D11B",Blazier,IF(E3="EO-Deal Processing-Isolated UI",James,na)))))))))

View 9 Replies View Related

What Do These Statements Do

Aug 22, 2008

a = Range("d1").CurrentRegion.Resize(,2).Value
and

Range("G1").Resize(n,2).Value = b

what do the above two lines of code do?

View 9 Replies View Related

Three IF Statements

Oct 1, 2009

I have the following:

=IF(I8>=G8,IF(I8

View 9 Replies View Related

If And Else Statements

Dec 23, 2009

if-and-else statement in vb.

I made a combo box where the user selects a part in a combo box and I want the part selected to be stored in a certain cell. The first selection would be stored in C15 and if thats not empty then in D15 and if thats not empty then in E15 and if thats not empty then in F15.

Dim m As Integer
m = cboPart.ListIndex

If m = 0 Then
If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If
Else
If IsEmpty(ActiveCell.Range("D15")) = False Then
ActiveCell.Range("E15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("F15") = cboPart.Value & vbLf & "Name: " + txtName
End If

End If

When I run this if-and-else statement it stops storing the selected data after the following:

If IsEmpty(ActiveCell.Range("C15")) = True Then
ActiveCell.Range("C15") = cboPart.Value & vbLf & "Name: " + txtName
Else
ActiveCell.Range("D15") = cboPart.Value & vbLf & "Name: " + txtName
End If

View 9 Replies View Related

Nesting For Each Statements

Nov 19, 2013

I got a 2 columns (A:B) with values in workbook1 (survey2.xlsm)

I want to open a sheet named according to values from column A wb1 in workbook2 (du_database2)

And I want to fill in the offset values (column B) in the aproppriate sheet

I wrote this sub for it. I am having troubles with the for each statements (how do I set them up properly?). The script itself hasn't been checked might also been wrong there.

VB:
Sub copytest()
'by J
Dim ws As Worksheet
Workbooks.Open "survey2.xlsm"
Application.Workbooks("du_database2.xlsm").Activate

[Code] .....

View 2 Replies View Related

VLOOKUP Within IF Statements

May 12, 2014

I'm using vlookups within IF statements to look in a number of various speadsheets depending on what the lookup value is.

So for example,

Formula:

This works well enough however I need some look up values to look in multiple spreadsheets as the data is split out between several spreadsheets. So for example, if B1=Hello I want to vlookup to 2 different spreadsheets.

I know I could do two instances of a vlookup within the formula, both for "hello" but looking to different spreadsheets. But doesn't this mean that if the first vlookup finds the value, the second one will overright it with an "#N/A" if it doesn't find it?

View 2 Replies View Related

2 IF Statements In 1 Formula?

Dec 6, 2013

I have 2 conditions that I need to apply.

View 3 Replies View Related

Four IF Statements To Combine

Jan 29, 2014

I need to write IF statement with 4 criteria, or at least I think IF will do the trick. It would be difficult and not very visual to describe my question here, therefore I have attached a dummy workbook with the comments. Basically I have got 2 values in 2 columns. Next 2 columns will hold letter "x". There are 4 possible variations how "x" will appear in those two columns: first, second, both or none. So depending where the "x" is, I need to return one of the 2 values.

View 6 Replies View Related

HLookup V If Statements

Feb 7, 2014

I have various 6 x 6 blocks which contain just numbers, in another part of the spread sheet I have a 1 x 6 block of numbers. What I need to do is to check whether any of the numbers in the 1 x 6 block appear in any of the 6 x 6 blocks.If that does occur then I want to make a specific cell increase by the times that the match happens.using HLookup but just got errors and the If Statement, although did work, went on and on and on.

View 6 Replies View Related

If Statements With Dates

Nov 17, 2008

I have a list of dates and I need to calculate how many of the dates are before or between certain dates. I can't quite get my parameters correct.

View 9 Replies View Related

Multiple IF Statements

Nov 23, 2008

I'm having trouble joining the followinf IF Statements. They work independently, however, I cannot get them to work in the same Cell.

Any help would be greatly appreciated.

=IF(A9="YES", SUM(A15+A21),"0")

=IF(B9="YES", SUM(B15+B21), "0")

View 14 Replies View Related

Vlookup Or IF Statements

Dec 8, 2008

I am new to this thread and hope you can find the time to help me. I am using excel to look up data manually entered in Widgets, Gidgets, Lidgets fields to find an exact match in an array and return the value in "field 1" with no luck. My lookup formula should return "9" from the Field 1 column.

Data Entry:

Widgets3
Gidgets6
lidgets5 ........

View 14 Replies View Related

How To Exceed 8 Max If Statements

Mar 4, 2009

I need to write an IF statement that exceeds the 8 statement maximum. Basically, what I want to say is: IF(U2>K2,1,IF(U2+V2>K2,2.........all the way up to U2...AM2>K2,19)

View 13 Replies View Related

Long IF(AND Statements)...

Apr 8, 2009

I've attached the workbook to make this easier. If you look at the file master.xls you will see 2 tabs. On the Tool tab I've highlighted some blue cells and some rose cells. If you look at the blue cell G68 there is a long formula that reads up to 3 cells from the Specs tab and then plugs in the correct data from the blue cells on the right side of the Tools tab page. I need the rose cell F69 to do the same thing only with the data from the rose cells to the right. When I try and duplicate the fromula from G68 into F69 I get errors. I hope I made this clear enough. The formula in G68 is long, is there a way to shorten it? Also sometimes in this workbook when I try to type a formula in a cell I get the text I typed instead of the formula. For example I might enter in A1, =B2. Instead of getting the data from B2, it reads =B2. I've looked at how the cell is formatted but can't get it to work.

View 3 Replies View Related

Multiple If Statements....

Aug 31, 2009

Trying the following multiple if formula, however it only works for my first if statement and not the rest.

=(IF(G21="onl",WORKDAY(E21,L27,K26:K43),(IF(G21="telb",WORKDAY(G21,L27,K26:K43),(IF(G21="mrt",WORKDA Y(G21,L27,K26:K43),(IF(G21="tlr",WORKDAY(G21,L26,K26:K43),(IF(G21="atm",WORKDAY(G21,L26,K26:K43),(IF (G21="chq",WORKDAY(G21,L26,K26:K43),(IF(G21="crcdwu",WORKDAY(G21,L28,K26:K43)))))))))))))))

View 4 Replies View Related

Nested 'IF' Statements

Oct 30, 2009

I'm hoping someone can help me sort this out. I have a formula I need te determine if a TAT was 'met' or 'missed' and it has multiple criteria. Here is the formula I am trying to get to work:

=IF(AND(I2="Amendments",F2<=3,IF(AND(I2="Renewals",F2<=1,OR(D2<=G2)))),"Met",IF(F2="n/a","n/a","Missed"))

I've been able to get separate pieces of the formula to work correctly, example:
=IF(AND(F2<>"n/a",I2="Amendments",F2<=3,OR(D2<=G2)),"Met",IF(F2="n/a","n/a","Missed"))

but when I try to combine everything into one string I can not get it to work.

View 10 Replies View Related

Case Statements

Jul 3, 2008

I know the concept of Case statements sounds simple, but trying to write it in my scenario seems a lot more difficult than I thought it would be. I have three columns with an unspecified number of rows (which are generated from another macro). Lets say those colums are C, D, E, and they should be strings because my criteria are based on the number of digits contained in each cell. I want to add a certain number of periods to a given cell, then add that string onto two other cell strings, and form one combined string in a separate cell.

Basically I want to sort of Concatenate the cells into a given cell in column F for each row, but there are many conditions. If the cells in column C contain 3 digits, I want to add one period "." onto the original string. If it has 4 digits, then I add nothing, and then, add that cell to the string in cell D, and then Cell E. [It is like the function Concatenate(C1&".",D1&"..",E1)]. Cells in Column D have 6 criteria, and cells in Column E have zero criteria.

And I need this to loop down until it reaches an empty row or cells.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved