Combine Functions Of 3 Buttons Into 1
Dec 16, 2008
In the attached xls I have a button on each tab, ideally I would like the button on the first tab to do everything, but I cannot seem to get it to work hence the current layout.
First button on first tab creates new xls and copies content of 2nd tab onto it, then copies various bits of info from certain cells in tab 2 into the 3rd tab.
2nd button on second tab simply clears the contents of the form, which is no longer needed as a seperate copy has just been created.
3rd button on 3rd tab just tidys up the cell borders
It would be much easier if I could get one button click to do everything (in that order preferably).
View 14 Replies
ADVERTISEMENT
May 27, 2009
I tried to do a search for this but the search function was not working.
I have an excel sheet that I can scan Mac address into. The reason I created the sheet is because when I scan them in they are uppercase and do not have separators. I would like to combine 2 excel functions into 1
This one
=LOWER(C2)
and this one
=LEFT(E2,2)&":"&MID(E2,3,2)&":"&MID(E2,5,2)&":"&MID(E2,7,2)&":"&MID(E2,9,2)&":"&MID(E2,11,2)
View 2 Replies
View Related
Jul 29, 2014
I've been struggling with the following problem for hours now and getting nowhere fast.
I've got '=(100/X6)*L6)' in cell M6 which gives my percentage fine but I need to round to the nearest integer with '=ROUND(M6,0)' Question is how do I combine both functions to provide the nearest whole number in M6 ??.
View 6 Replies
View Related
Aug 20, 2014
Looking to nest or combine the following 2 functions because I'm looking up the same cell content, except within 2 different tables.
=IF(B12="","",SUMPRODUCT(--($B$12:$B$17=X18),--($S$12:$S$17))) and =IF(B22="","",SUMPRODUCT(--($B$22:$B$32=X18),--($S$22:$S$32)))
Right now, these functions works well from a single table but need to combine them. Other function examples are welecomed too.
View 6 Replies
View Related
Oct 2, 2008
XL 2003
I want to combine these three functions
=VLOOKUP(e4,AGTNAME!$A$1:$E$3086,5,0)
=LEFT(E4,FIND("/",E4)-1)
and iserror
View 9 Replies
View Related
Dec 16, 2006
I've got an indexmatch that works great
=IF(ISERROR(INDEX(accountstaff,MATCH(B$20,INDEX(accountstaff,,1),0),MATCH($ A55,INDEX(accountstaff,1,),0))),0,INDEX(accountstaff,MATCH(B$20,INDEX(accou ntstaff,,1),0),MATCH($A55,INDEX(accountstaff,1,),0)))
But I need to incorporate IF statement based on varying levels of revenue and think VBA will be less cumbersome, but don't know how to combine else if and index match.
I am trying to accomplish this:
IF B$20 (which is a dollar amount is = X, then index, match....
IF B$20 is > Y but < Z, then index, match...
View 9 Replies
View Related
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
Mar 14, 2008
I am aware of the following topic in the VBA Help file:
"Using Microsoft Excel Worksheet Functions in Visual Basic
You can use most Microsoft Excel worksheet functions in your Visual Basic statements. To see a list of the worksheet functions you can use, see List of Worksheet Functions Available to Visual Basic.
Note Some worksheet functions aren’t useful in Visual Basic. For example, the Concatenate function isn’t needed because in Visual Basic you can use the & operator to join multiple text values."
And I'm aware of how to call Excel funcitons from within VBA; e.g., answer = Application.WorksheetFunction.Min(myRange)
However, not only are some Excel functions not useful; the fact is they cannot be used because VBA has a native function that does exactly the same thing and you have to use that native VBA function to achieve your goal. It is these overlapping functions that I am especially interested in. I want to know what I should use directly in VBA and what I need to go to Excel for.
View 9 Replies
View Related
Apr 8, 2009
I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.
View 2 Replies
View Related
Dec 16, 2008
I'm trying to make a macro that creates a button (to run another macro). I'm also trying to make sure this has a specific name, instead of just "Button#". The code I get from recording this is:
View 5 Replies
View Related
Mar 31, 2009
my main project will have about 8 different buttons.
View 5 Replies
View Related
May 16, 2009
i want to filter the sheets on click of a button .
like in this sheet i want to filter the column E in column E their are many reasons of non delivry of my products i want to find out which department is accountable for how much loss so on click of a button it filters with 2 reasons
RTM department
1)Ko Cannister stock Out
2) Outlet Need fresh stock
View 7 Replies
View Related
Jan 24, 2010
Dear sirs,with best regards,i have in attached example file some cells i have protected them by ( tools-protect ) which is the general way for protection,for special purpose i ask you kindly to help me by:
creating a buttons with macros to protect and unprotect the ( cells,columns,rows,and all the sheet) that i need to protect them, when i want to (protect or unprotect) i have to click these buttons.
View 6 Replies
View Related
Nov 23, 2011
If possible I would like to create using vba a button at the end of my rows of data allowing a user to copy and insert the row next to the button, i.e. duplicate.
I am using the following code to create the button but am not clear how to link a button to a row or cell. The button would be within a cell in a row at the end of the data.
Range("a2").Offset(rowoffset, 10).Select
ActiveSheet.Buttons.Add ActiveCell.Left, ActiveCell.Top, ActiveCell.Width, ActiveCell.Height
rowoffset increments within a loop and a button is placed at the end of each row of data.
I would also like to know how to name the button.
View 5 Replies
View Related
Aug 23, 2007
I created a frame in a spreadsheet I put in 2 options buttons that I called Left the first one and Right the second one. I got 2 cells lets say C10 and G10 in these 2 cells I write the cell number values. When I click on button one or Left, I need the cell C10 be set focussed and write a number e.j 5. However, when click on the second butt to write a number e.j 7, the number in the cell C10 still there, so, what I need is a cero or an empty cell C10, and viceversa. Could you help to write a code for this problem.
View 9 Replies
View Related
Apr 9, 2009
I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
View 9 Replies
View Related
Aug 5, 2009
I currently have a sheet (SHEET-A) which pulls in a figure from a cell (CELL-G) in another workbook sheet (SHEET-B), and displays the value in CELL-X.
CELL-X then is used for a series of calculations on SHEET-A.
CELL-Y is adjacent to CELL-X and can have a number entered into it which is then used instead of CELL-X for the calculations on SHEET-A. (It is also incidently displayed over CELL-Gs value in CELL-X)
I would like to have a button next to CELL-Y which upon click alters the value of CELL-G in SHEET-B to that of CELL-Y in SHEETA.
View 9 Replies
View Related
Feb 20, 2009
I am trying to do a small survey within my company by email.
It is very short, 5 questions, I was hoping to add in yes/no buttons and have a code that will sum up the individual responses.
Something like (yes(1,4)=2) (No(2,3,5,)=3 .......
View 9 Replies
View Related
Mar 5, 2007
I have created a great little macro to handle a large amount of data on my spreadsheet that I've been using for several months. It's a shared sheet that is used by many people, but the macro is protected...That being said, something strange has happened that none of my buttons for activating the macro are no longer visible. I can't even create new ones. I get a box outline with a little red X in the upper LH corner. I've verified that the button is in fact set to be visible and set up properly for colors, etc.
I'm not sure what's happened since it happened in a matter of hours...did something get "deactivated" that I need to re-instate?
View 4 Replies
View Related
Mar 27, 2007
Is there a way to put round, or any other shape, buttons in vba forms?
View 6 Replies
View Related
Jun 26, 2007
is there a way to set all yes/no option butons to "no" when a worksheet is activated?
View 5 Replies
View Related
Dec 4, 2009
I want to calculate the following...
If Cell A>40, Then the result should be ((Cell A-40)*23.25)
If it is not >40, Return 0.00
This is for a timesheet / overtime.
View 2 Replies
View Related
Jan 12, 2010
Is it possible to use excel functions with in VB? (such as CONCATENATE, LOGEST etc.) For example, if I have a site no. and data for this site in an array could I append the site number to the data by:
View 4 Replies
View Related
Apr 19, 2007
i have a spreadsheet acting as a type of database (our work wont pay for more licences for access!), and it has multiple functions running. well, it has 3000 lines x2 for 2 sheets with about 5-10 full colums of functions. this means the template file i have starts off at about 10mg. with data, this goes upto around 15-20mb. howver, we get a lot of the massive size increases. however, the sizes we get are often upto 150mb! so, i dont know vb at all, and have only learned functions recently. was hoping someone might be able to help out sorting this out? i dont know if i can upload a coppy online, but i can email.
View 7 Replies
View Related
Feb 13, 2014
IMAGE1.jpg ... This list uses rows up to 1040. What I am needing to do is create a master button similar to the "Show All" Button at the top that hides any sub group automatically based on the values in the yellow box. The hide button to the right of the hardware assembly will hide the rows when pressed but that requires me to go down the list and press each button that the yellow box has a zero in. I would like to create a button that has a macro that will automatically "click" or run the hide button when its corresponding yellow box has a zero in it. If the value is greater than zero it does not need to hide that hardware group.
Example from attached image. If I were to run the new macro it would run the hide button for rows 5-8, not run the macro for rows 10-13, then again run the macro for rows 15-18, and so on until it reaches the last yellow box which is row 1036 (hide rows 1035-1039).
View 9 Replies
View Related
Dec 30, 2008
I'm interested if it is at all possible to configure say, one sheet that is a rough visual layout of an inventory shelf, and if an object on said shelf was clicked, then relevant text would be displayed in the respective fields.
So if I had a picture of a shelf full of groceries on sheet1, and say clicked on a can of beans, then beside my picture of the shelf full of groceries, it will copy over the information I keep relevant to my beans.
View 5 Replies
View Related
Aug 5, 2009
What can I do to prevent a button to shrink to a fraction of its size when it's clicked?
It used to work alright, but when I got the file back from a collegue it started to show this weird behaviour?
View 9 Replies
View Related
Nov 26, 2013
I'm trying to delete the buttons on the top of this worksheet, and for some reason am not able to do so.
View 3 Replies
View Related
Jan 17, 2014
I have been having an internal debate of how my worksheets shoud be configured.
My workbook could potentially contain 300+ worksheets, 10 control buttons and around 20 macros.
Each worksheet contains data in a range ~ A1:AC40 with many blank cells.
Do you think a workbook with this many worksheets would be unmanageable given the Comp Spec of the user PC below?
Most of the cells are simply short text data.
System info
Processor: 2.3Ghz Dual Processor
RAM: 2GB
32bit
View 7 Replies
View Related
