Buttons Not Visible

Mar 5, 2007

I have created a great little macro to handle a large amount of data on my spreadsheet that I've been using for several months. It's a shared sheet that is used by many people, but the macro is protected...That being said, something strange has happened that none of my buttons for activating the macro are no longer visible. I can't even create new ones. I get a box outline with a little red X in the upper LH corner. I've verified that the button is in fact set to be visible and set up properly for colors, etc.

I'm not sure what's happened since it happened in a matter of hours...did something get "deactivated" that I need to re-instate?

View 4 Replies


ADVERTISEMENT

VBA Loop For Making Command Buttons Visible

Jun 10, 2013

I'm trying to write a code to make a number of buttons visible depending on a cell value

I have 10 command buttons all are invisible and I want to show only the first x
x is the value of cell "A1" in "Sheet1" (will be from 1 to 10)

Code:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Dim i As Long
For i = 1 To Sheet1.Range("A1").Value
CommandButton& i.Visible = True
Next i
End Sub

View 1 Replies View Related

Resize Visible Rows Based Only On Visible Columns Text

Apr 22, 2009

Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.

View 3 Replies View Related

Multiple Macro Buttons (radio Buttons)?

Feb 10, 2012

I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.

Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.

While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.

Is there a quicker way?

View 6 Replies View Related

Change The Color Of Buttons Or Command Buttons

Mar 14, 2007

Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.

I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.

View 9 Replies View Related

Multiple Checkboxes Visible Or Not Visible?

Jul 1, 2014

I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.

[Code] .....

View 2 Replies View Related

Copy Visible Rows And Paste To Visible Rows In Same Sheet Of Excel / VBA Code

Oct 27, 2013

I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...

Product
F1020
F1023
F1025
F1120
F1123
F1125

[code].....

Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden

I WANT TO COPY ROWS COMING UNDER COLUMNS

F1120
F1123
F1125

TO

F1020
F1023
F1025

when i use the code

Selection.SpecialCells(xlCellTypeVisible).Copy

i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025

Tried this in a frantic effort

Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues

But got an error for " multiple selection"

View 1 Replies View Related

How To Copy From Visible Cells To Visible Cells

Apr 16, 2014

Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.

I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.

Table below so i filter out the "a" so i just have numbers then want to past into vible cells.

CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44

View 2 Replies View Related

Radio Buttons.?

Apr 8, 2009

I've got a small problem with radio buttons. I've been asked to add a few to a sheet we use at work, problem I'm having is when I add these new buttons from the forms toolbar and then assign the cell link for them some of the other radio buttons on the sheet asume the cell link of the new buttons and when I change them back the cell link for the new buttons change ? i could understand this problem if I had maybe copied them and modified the copies perhaps but that isn't the case.

View 2 Replies View Related

Creating Buttons Using VBA

Dec 16, 2008

I'm trying to make a macro that creates a button (to run another macro). I'm also trying to make sure this has a specific name, instead of just "Button#". The code I get from recording this is:

View 5 Replies View Related

3 Different Validation Buttons

Mar 31, 2009

my main project will have about 8 different buttons.

View 5 Replies View Related

Filter Using Buttons

May 16, 2009

i want to filter the sheets on click of a button .

like in this sheet i want to filter the column E in column E their are many reasons of non delivry of my products i want to find out which department is accountable for how much loss so on click of a button it filters with 2 reasons

RTM department

1)Ko Cannister stock Out
2) Outlet Need fresh stock

View 7 Replies View Related

Protect Buttons ...

Jan 24, 2010

Dear sirs,with best regards,i have in attached example file some cells i have protected them by ( tools-protect ) which is the general way for protection,for special purpose i ask you kindly to help me by:

creating a buttons with macros to protect and unprotect the ( cells,columns,rows,and all the sheet) that i need to protect them, when i want to (protect or unprotect) i have to click these buttons.

View 6 Replies View Related

Linking Buttons With A Row?

Nov 23, 2011

If possible I would like to create using vba a button at the end of my rows of data allowing a user to copy and insert the row next to the button, i.e. duplicate.

I am using the following code to create the button but am not clear how to link a button to a row or cell. The button would be within a cell in a row at the end of the data.

Range("a2").Offset(rowoffset, 10).Select
ActiveSheet.Buttons.Add ActiveCell.Left, ActiveCell.Top, ActiveCell.Width, ActiveCell.Height

rowoffset increments within a loop and a button is placed at the end of each row of data.

I would also like to know how to name the button.

View 5 Replies View Related

Option Buttons

Aug 23, 2007

I created a frame in a spreadsheet I put in 2 options buttons that I called Left the first one and Right the second one. I got 2 cells lets say C10 and G10 in these 2 cells I write the cell number values. When I click on button one or Left, I need the cell C10 be set focussed and write a number e.j 5. However, when click on the second butt to write a number e.j 7, the number in the cell C10 still there, so, what I need is a cero or an empty cell C10, and viceversa. Could you help to write a code for this problem.

View 9 Replies View Related

Getting Rid Of Command Buttons

Apr 9, 2009

I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.

When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.

When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.

How do I delete these command buttons left from previous pasting activities when I wish to reset my range?

View 9 Replies View Related

Using Buttons Over 2 Workbooks...

Aug 5, 2009

I currently have a sheet (SHEET-A) which pulls in a figure from a cell (CELL-G) in another workbook sheet (SHEET-B), and displays the value in CELL-X.

CELL-X then is used for a series of calculations on SHEET-A.

CELL-Y is adjacent to CELL-X and can have a number entered into it which is then used instead of CELL-X for the calculations on SHEET-A. (It is also incidently displayed over CELL-Gs value in CELL-X)

I would like to have a button next to CELL-Y which upon click alters the value of CELL-G in SHEET-B to that of CELL-Y in SHEETA.

View 9 Replies View Related

Sum Up Yes & No Buttons Results

Feb 20, 2009

I am trying to do a small survey within my company by email.

It is very short, 5 questions, I was hoping to add in yes/no buttons and have a code that will sum up the individual responses.

Something like (yes(1,4)=2) (No(2,3,5,)=3 .......

View 9 Replies View Related

Round Buttons

Mar 27, 2007

Is there a way to put round, or any other shape, buttons in vba forms?

View 6 Replies View Related

Set All Option Buttons To No

Jun 26, 2007

is there a way to set all yes/no option butons to "no" when a worksheet is activated?

View 5 Replies View Related

Sum Only Visible Cells

Jul 23, 2009

I have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?

View 3 Replies View Related

Only Visible On Start Up

May 9, 2009

I have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.

View 3 Replies View Related

Last Visible Row With Autofilter

Jun 2, 2009

I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:

View 4 Replies View Related

Sum Of Visible Cells Only

Aug 21, 2006

I have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -

View 10 Replies View Related

Get Row Of Visible Cells

Feb 15, 2012

I have finished a huge project. The final step is sending emails.

I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'

Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).

So need a loop to do for each cel in rng.Column(5)

.Attachments.Add rng.Cells(cel.row?,5)

Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?

View 1 Replies View Related

Get Sum Of Only Visible Values?

Oct 2, 2013

I have a table with autofilter enabled

I also have a cell that is supposed to show the sum of values in column C, cell C1

But the things is, the sum formula gets the sum of everything in column C.

I only want the formula to add items when it's visible in the table.

If I want to know the total expenses on bond paper, I select bond paper in column D's filter Then the expenses will show up with bond paper but I till get the sum of everything in Cell C1.

View 5 Replies View Related

Sum Visible Cells Only

Feb 7, 2007

I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?

Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function

View 9 Replies View Related

VBA For Visible Range

Aug 10, 2007

I'm looking for the row and column number, or number of rows and columns, that are visible in activewindow. Activewindow.visiblerange.row, .column (and .Scrollrow, .Scrollcolumn) are nice but

I prefer not to perform division on pixel height; I'm looking for some count or rowcount but I haven't been able to locate the object.

View 9 Replies View Related

Countvisible / Max - Visible

Jan 23, 2008

I have all in place to use formula countvisible, does someone know the formula for showing the maximum number out of those visible / filtered.

View 9 Replies View Related

Sum Only Visible Rows

Oct 16, 2008

I have this sheet:

A B
1
2 1 1
3 2 2
4 3 3
5 2 4
6 1 5
7 2 6
8 3 7
9 1 8
10 1 9

SUM(B2:B10) gives 45

Now I add a filter so all the rows with A = 1 will be hidden. That gives me:

A B
1
3 2 2
4 3 3
5 2 4
7 2 6
8 3 7

But SUM(B2:B10) still gives 45. But it should be 22.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved