I have 2 sets of data/array/range. Each set consists of 2 columns with a large number of rows.
I want to compare my 2nd data to a master data. And list if anything is different in 2nd set of data from master set in column A than highlight the difference or copy the value to another place.
Also want to compare the 2nd column if column A was same and consider both column A and column B for that associated row different if column B is different.
The trouble for me comes in because the list is never alphabetical (sort doesnt work cause of funky naming) and never of the same size.
Attached is a photo of an example for maybe an clearer understanding. Also attached an example excel sheet I tried it within excel but cant seem to figure out how to look also for the 2nd column, so im trying to avoid the within excel route and go using vba ...
T3OCcxw.jpg
example.xlsx
I attempted it with a very basic code thats not working =/ just cant seem to figure how to code to get the desired result
VB:
Sub matchdiff()
Dim cell As Range
Dim found As Range
I am a absolute newbie to VBA, I've got 2 timetables, they show deliveries for different countries. I need to make my code as DYNAMIC as I can. TableCustomer shows the customer's name, country and their opening times, Saturday - Friday, it uses 1s and 0s to determine if they are open or closed, 1 = open, 0 = closed, so the headers are: Customer Name, Country, Saturday, Sunday, Monday, Tuesday, Wednesday etc.
TableCompany shows the days of deliveries made to each country by the company, using 1s and 0s, 1 = Deliver, 0 = Don't deliver. The headers are Country, Saturday, Sunday, Monday, Tuesday, Wednesday etc. An example here is that, if in TableCustomer, the customer is opened(1) on a Saturday, but in TableCompany, the company does not deliver(0) to that country on the Saturday, change that 1 into a 0 in TableCustomer. But if the Customer is closed(0) on the Saturday, then don't change the value 0, because the company will not be able to deliver to them anyway, even if they can deliver to that country on that day.
In my attachment I am trying to identify rows within Table 2 that do not fit in with Table 1. For example in Table 2, Row 16 has a Start Date of 17.11.2010 and an End Date of 13.11.2011 for ID number 151. This record has to be shown as "OK" because it fits into the date range of Row 103 of Table 1 i.e. Table 1 Row 103 has a Start Date of 01.01.2010 and an End Date of 28.02.2013 for ID 15. In other words the Start Date of Table 2 Row 16 is GE the Start date of Table 1 Row 103, and the End Date of Table 2 Row 16 is LE the End Date of the same Row 103 of Table 1, therefore this reocrd is OK.
Row 14 of Table 2 needs to be shown as "NOT OK" because it has a Start Date of 12.01.2013 and an End Date of 31.03.2013 for ID 15 and this doesn't fit any date range of any Row in Table 1 for ID 15.
I have tried nested ifs and vlookup to compare two sets of data and change the first set of data if it is than the first. But leave it alone if it either is the same or does not exist in the new set of data. It sometimes seems to work but i find it is not consistant. It looks simple but i think i am missing something.
if column A has identifiers and column B has results then it should work if the identifiers in column C are found in column A and it looks to see if column B and D are the same, then change B if different but leave it if either it is the same or not there.
I am working on large sets of data (more than 50,000 rows of data). I have two sets of data. Set 1 and Set 2 (master data) on the same worksheet. Both the sets of data have three columns each. I am using EXCEL 2007. I was able to accomplish step 1 below.. but I am totally lost with step 2 since i have an additional criteria for the "year".
I have attached the excel sheet as well. This is what I am trying to accomplish:
1) I want to find exact matches in set 1 and set 2 and highlight it or do something to show that a match was found. The challenge is the data in set 1 can occur anywhere in set 2.
2) Add to the complication .. my criteria for matching the year is different. If the Set 1 "year" is equal to or greater by 1 yr or greater by 2 yr when compared to Set 2 "year", I want to treat it as a "match".
For example, from the data attached:
Set 1 data in row 4 is: ATLANTIC ABSECON 2004 Set 2 data in row 3 is: ATLANTIC ABSECON 2003
I want to treat these two data as "MATCH" since ATLANTIC matches ATLANTIC, ABSECON matches ABSECON and according to one of my criteria for year, Set 1 "year" is greater by 1 yr than the Set 2 "year".
I am trying to figure out how to compare two sets of dates against one another in vba. The data is spread over eight columns. I need to be able to find the smallest date in the first four columns and then compare it to the smallest date in the other four columns, then go to the next smallest and so on.
I have column A with 228 rows and column D with 314 rows. Both columns have the same data except that D has different data. I would like to line up everything that is the same in A and D and everything else in column D that is not the same move to G. Is there a quick way to do this?
i want to compare data between 4 columns, 2 columns of data is in Sheet 1 and 2 columns of data is in sheet2. Data starts at A5 in both worksheets. Data consists of stock codes and there holdings. Sheet 1 data is real data the primary source, sheet 2 data is a bit of real data and incorrect data.
My data in sheet 1 is layed out as below, this is just a sample, real data has around 1500 stock codes and holdings.
Starting at A5 Col A (Stock) Col B (Holdings) 5 aap 10500 6 aax 10987 7 aas 76544
Sheet 2 data is layed out as above but holdings may differ, so
Col A(Stock) Col B (Holdings)
5 aap 10500 6 aax 10300 7 aas 76534
I need a formula which will tell me which stocks holdings have changed in sheet 2 compared to sheet1.
I'm working with Excel 2007, I have two tabs on my spreadsheet, each tab contains a column of numbers formatted like 5552220. Is there a way to run a macro or write a formula that would compare the data between the two columns and either automatically delete the numbers that don't have a match or highlight them? For example:
Tab A Tab B 5551112 5551112 6660001 6660001 1234567 1234567 2222222 2222222 6666445
6666445 needs to be deleted in tab B because it's not present in tab A. There could be up to 100 numbers that require deletion from tab B.
I have 2 columns say A and B (infinite number of rows) A is an Indexed number starting at 1 B is numerical data.
I now have a second set of the same columns with the same data, however some rows are missing. I need a way of comparing the data and then display the rows I am missing in the second set of columns.
For example the first set will be the master list and look like: Index Data 1 34 2 46 3 54 4 276 5 311 6 89
Second list has row 2 and row 5 missing.
Index Data 1 34 3 54 4 276 6 89
The desired result is to have the missing rows displayed;
I have 2 worksheets in 2 spreadsheets 1 & 2. I would like to compare columns A & G in 2 to 1. If columns A & G in worksheet 2 matched worksheet 1, then it will fill in columns B, C, D, and AL automatically.
I'm having difficulties using vlookup to compare two columns of TEXT data. My goal is find out how many of items in the "Eligible Serial Numbers" list have been ordered for destruction. The items listed for destruction are listed in the "Serial Numbers (destroyed).
Whenever I put in a VLOOKUP, I get a serial number that doesn't make sense to me. For example, if I want to find out if "362351581" from the Eligible List appears on the destroyed list. What do you suggest?
Code:
Destroyed? (i.e. Vlookup formula in this column) Eligible Serial Numbers Serial Numbers (destroyed) 362351581 362351581
I have account numbers in Col A and in Col D .I would like a macro to highlight the color the items in Col D that are not in col D. Blanks can be ignored
I have one column which contains suppose first names & i have other two column which contains first name & last name in same sheet but like they may be having in g & h column.
so i want to exact last name of user form that column(g & h) to my first name column(a).
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
I have two columns of adjacent data Call them A & B (although this could differ)
If the data in the second colum is not equal to, blank cell or contains the words "CAT", "DOG" or "ELEPHANT" then the content of the cell in the second column should REPLACE the content of the adjacent cell in column A (in this example) leaving B blank, otherwise column B remains unchanged.
I have two sets of data from columns A:N (O is blank) & P:AC. Column A & P are account numbers. I want to compare columns A & P for exact matches, there will never be any duplicates in either of these columns by themselves. If there is a match I would like that entire row to align, if there is no match I would like a row to be inserted. I have attached a copy of a worksheet of what I am looking to have done.
I have an Excel macro which works well in comparing two columns A and B. It populates column C with unique values in A and not in B, populates column D with unique values in column B and not in A and puts the values found in both A and B in the fifth column (E).
Data in the columns A and B of Sheet 1 has exceeded 1,048,576 (the maximum allowable in Excel 2007) and i will copy the overflow data in Sheet 2's column A and B and i will like the comparison to continue in the next worksheet.
I need the macro to treat the second worksheet as a continuation of the first sheet and not as a separate data. (The values i am comparing have exceeded 1million).
Sub twocols() Dim d As Object, na&, nb&, a, b Dim e, p&, q&, r&, m Set d = CreateObject("scripting.dictionary")
I would like to compare some keyword lists if possible.
I have a large list of Unique keywords in Col A (From A3),
This Column is called Keyword List A - Large"
I then have a keyword list in Column C (From Cell C3),,
This Column is called "Keyword List B - Small.
I then have a column called "Unique Keywords Found",, This is Col E,, with hopefully returned results being entered from cell E3 downwards.
What I would like to be able to do if possible is run a Macro that would compare all the unique words in ColA and C and return only the difference, (The Unique words not found in ColC as Col A is the "Master List")
If possible could a pop up box appear saying =================== List A No Rows:xyz List B No Rows: xyz No of Uniques Found : xyz Time Elapsed (sec): xyz ===================
searching between 2 columns (A:B) and finding duplicate emails using some type of formatting that will highlight duplicate emails?
For example? A B me@yahoo.comsmelly@yahoo.comegg@msn.comspazz@guno.comdupada@hotmail.comhope@aol.comokay@gmail.comhelp@popp.comhope@aol.comfunky@chicken.com check@team.com hope@aol.com
I am using MS Excel 2007 and not very experienced, but this is for a marketing golf tournament my company is hosting.
I need excel to check to see if the data I input into column B is an exact match to the data in column A.
If it is an exact match, then column B will remain blank.
If the data in column B is different, I need column B to show the following:
No match: <data>
Example I input in column B the following:
Column A Column B 1. Car Car 2. 4357 9999 3. fsd34d 4erd 4. 98dkf 98dkf
Spreadsheet should show: Column A Column B 1. Car 2. 4357 No match: 9999 3. fsd34d No match: 4erd 4. 98dkf
(Cell 1 and 4 in column B are empty because they are exact matches to Column A cell 1 and 4)
My questions: 1) How does the excel formula need to be written for this to work?
2) Is there a way to set it so that when I do a mass copy to data into column B that the formula will not be overwritten and it will still check to see if the data I copy and pasted into that column matches the data next to it in column A?
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
I'm sure this query has been answered somewhere else but I can't seem to find it. I basically have information in two worksheets in the same workbook which need to be compared and the missing values from one worksheet need to be listed in a message. There are duplicate values in both worksheets so only need a list of the unique missing values. For example:
Sheet1 Column A 1 2 1 5 5 2 3 5 4
Sheet2 Column A 2 3 3 4 3 4
The message box should state that we are missing 1 and 5 from the dataset as it is not in Sheet2. If the list could be sorted in ascending order that would be great too.
I have a code in software that exports results to excel. But it stores the numbers associated with indices as text. I need to change all of them to numbers. So I have written the following code, that search through the folder, converts text to numbers and colses the file.
Sub ConvertText2NumberFiles() Dim v As Variant Dim rng1 As Range, bk As Workbook Dim i As Long ChDrive "C" ChDir "C: ...analysis"
[Code]....
The problem is it takes time becuase it is going through A LOT OF cells. I only need at most the first 4 columns and the first 2 rows. So I wanted to use the union. I wrote the following:
Set IndexColumns = bk.ActiveSheet.Range(Columns("A") & ":" & Columns("A").SpecialCells(xlLastCell)) Set IndexRows = bk.ActiveSheet.Range(Rows("1") & ":" & Rows("1").SpecialCells(xlLastCell)) Application.Union(Range("IndexColumns"), Range("IndexRows")).Select
Which doesn't work! Morover it is only for one column and one row.
NOTE1 : Like any matrix, the intersection of index columns and index rows is blank! NOTE2 : The lenght of indices is different from one file to another
I am trying to compare multiple column in a worksheet to find common component in all the columns and what is unique to a particular column only. And list the results/finding in adj column. What i am trying to accomplish is something as below.
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
I am trying to create a very large spreadsheet and i have got everything organized, but for easy viewing i want to have a toggle button that hides and un-hides certain sets of the columns (ie. Press down and it hides columns "B-F", "H-J", and "M-O".... then on depress it shows all the information again)
I have got some of the coding down, but am only able to get it to hide one set at a time, not all the sets. Can anyone help me out and let me know how i tell it to run multiple commands from the one press? here is the code i have already: ...