Basically I have a string of dates, I want to get the max of the values that are before a specific date and return the header. Look at the file I provide for better understanding.
View 2 RepliesI need to compare a string from say A1 to a range of cells in another workbook and if found return the value of a cell on the same row.
Something like - look up string value in A1 in other workbook.sheet1.A1:A65535 if matched return the value of matched row column b.
OR
IF Otherworkbook.sheet1.A20 = A1 return the value of B20
I have .csv file from which the data is importing to master schedule. i have a column in .csv file which is spitted into multiple columns. and my need is i have to compare this each individual cell value with the range of header values in master schedule and if match found i have to place that cell in the row.
I am adding 2 attachments one is .csv and other is master schedule.
I couldn't able to find where i have to attach my files.
I have a data set with the weeks of the year as my column headers and a value of 1 (from a pivot table) in a distinct row value (removed for privacy) showing whether it existed in a given week based on pre defined criteria. What i need to do is ID the first (from the left) non blank cell in each row and then return that cells column header. I then need to do the same for the last (from the left) non blank cell in each row and then return that cells column header. On the attached I've put values in column N and O to show an example of what I need to return using a formula.
View 7 Replies View RelatedI'll quote the example straight away.
Col A Col B
A,S,F A,S
A,R,S A,R,S,T and so on.
There is no fixed pattern for the values, but they are separated by commas only. All i need is to compare col A and col B and return me the value in Col C like this,
Col C (col C is to know the removed value from comparison)
F (for line 1)
Col D (to find the letters that are added from comparison)
T (for line 2)
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
I have a dataset of shifts and want to compare each shift that needs to be filled to a list of requests for time off (vacation, etc).
For one cell the code is: =IF(ISERROR(SEARCH(B1, A1), 0,1)
Where A1 is the column of requests in comma delimited forme (ie: "AB,CD,EF").
Where B1 is the column containing the person assigned to shift 1 (ie: "AB")
In this case, would return a "1" as no error was returned, as AB was found in the list. Here "1" would represent a schedule conflict.
Without creating many cells for each shift- there are 20 shifts- can I create an array or string together this type of "SEARCH" function?
I am trying to create a macro that will compare several un-formatted workbooks and copy just what I want to a workbook of my one.
I start by having 2 different workbooks opened ("Main" and "Change") side by side like this: 1.jpg
Then i run the macro in my "Main" workbook and it should appear an Userform like it showed in the image below: 2.jpg
This is so that i can manually fill the user form with the correct columns by looking at the excel file, for example:
Ref=E3;City=G3; Data=I3.
Pressing Ok, it fill the "Main" workbook with the matching information so it and closes the "Change" workbook.
At the moment my code is in this stage:
VB:
Private Sub CommandButton1_Click()
myfile = "C:Userssst1brgDesktopRelatorios" & TextBox1.Value
Application.Workbooks.Open Filename:=myfile
Windows.Arrange ArrangeStyle:=xlVertical
[Code] .....
But I am stuck because there isn't any error and nothing happens.
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
Formula that will return a string of dates (in values so that I use the cell for additional formula).
For example:
A1 B1 C1:to whatever cell needed, to be autofilled with day, date, month, year, weekdays only.
Start Date 2013/07/04 Monday, July 1, 2013
It would be really nice if it highlights the local holidays too.
I have made this function that returns the string value for a column based on it's number but it starts getting more complicated after I've been thru the alphabet once and have to return two string values to move across the chart.
PHP
Function colnum_string(ByVal num As Integer) As String colnum_string = "IV" If num = 1 Then colnum_string = "A" End If If num = 2 Then colnum_string = "B" End If If num = 3 Then colnum_string = "C" End If If num = 4 Then colnum_string = "D" End If If num = 5 Then colnum_string = "E" End If If num = 6 Then colnum_string = "F" End If If num = 7 Then colnum_string = "G" End If If num = 8 Then colnum_string = "H" End If If num = 9 Then colnum_string = "I" End If If num = 10 Then colnum_string = "J" End If If num = 11 Then colnum_string = "K" End If If num = 12 Then colnum_string = "L" End If If num = 13 Then colnum_string = "M" End If If num = 14 Then colnum_string = "N" End If If num = 15 Then colnum_string = "O" End If If num = 16 Then colnum_string = "P" End If If num = 17 Then colnum_string = "Q" End If If num = 18 Then colnum_string = "R" End If If num = 19 Then colnum_string = "S" End If If num = 20 Then colnum_string = "T" End If If num = 21 Then colnum_string = "U" End If If num = 22 Then colnum_string = "V" End If If num = 23 Then colnum_string = "W" End If If num = 24 Then colnum_string = "X" End If If num = 25 Then colnum_string = "Y" End If If num = 26 Then colnum_string = "Z" End IfEnd Function
Is there a better, more simple way to return the string value for a column from it's number reference?
Say I have a table like this:
Value 1---Value 2---Name
1---------1---------Potential client
1---------3---------Loyal client
2---------5---------Happy client
Now I have two separate columns with values for "Value 1" and Value 2". How can I tell Excel to look in the table above and return the name?
I have a problems here. The problems is attached in the file. I wanna extract alpha/char from a string. Example: I wanna extract the words "(M)" with the bracket from the string "Toothbrush (M)" in column A. After extracting the (M) out, I wanna do a validation to compare the (M) in column B with another data in column C, if the (M) is same as the data called "Medium" in column c, the validation will return "Match" in the column d!
View 9 Replies View RelatedI want to know that are there anyway I can quickly declare the header row of the sheet into a string instead go through each one of them using dim xxxxx AS String?
View 3 Replies View RelatedI have this spreadsheet, I have a title in cell A1, then the following column headers alternate betweens entries I want and those I don't (in this case A in Cell B1, an irrelevant value in C1, C in Cell D1, an irrelevant value in E1, D in Cell F1 etc...).
What I want to do is take the original value, so A from B1 and make it Aa, then make C1 contain the same A, but this time Ab.
It should be very obvious what I'm after from the spreadsheet.
I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I have a worksheet with the following values:
header row 15 17 19 25 etc.
each column underneath the row will have a value of 0 or -1
A B C D E etc
1 15 17 19 25
2 0 -1 -1 0
3 -1 0 0 0
4 0 0 0 0
etc
I want a formula that I would put in each row that would return the value of Row 1 if there is a -1 below that value. So, in this example:
Row 2 formula would return 17,19
Row 3 formula would return 15
Row 4 formula would return nothing
I am working with data that has numeric values in columns S, T and U. In column M I want to return the header of the column that has the largest value (S,T or U).
Here is the formula I am trying to use:
=IF(OR(S2>T2,S2>U2),$S$1,IF(OR(T2>S2,T2>U2),$T$1,IF(OR(U2>S2,U2>T2),$U$1)))
The problem is that it only sometimes works properly. I have found instances where the value in column T is greater than S and yet column S's header is still returned. What am I doing wrong?
I need a formula to put into cell B19 to Find X in the corresponding row and to return the header value
******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows .NET Server (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEF1Part NumberDescriptionSubframe BuildCut And ChopHopper BuildCabBuild2026319Assy Air Ram Auto Blanking X 3026321Assy Air Ram Rear Boom L/H X 4026320Assy Air Ram Rear Boom R/H X 5022587Assy Air Ram Side BrushX 6031159Assy Air Ram Side Brush Large DiameterX 7030501Assy Blanking Flap Valve Single Vm Minor 8034783Assy Brake Pedal Lh Vm Minor Fl X9034784Assy Brake Pedal Rh Vm Minor FlX 10036349Assy Brush Control D/S No Hp Opt Mer/Mag X 11024553Assy Brush Core 1300 Large Widesweep X 12024554Assy Brush Core 1300 Small Widesweep X 13023169Assy Brush Core Large 7000 X 14025662Assy Brush Core Large 80/85 X 15032482Assy Brush Core Magnum Poly/Wire Mix X 16 17 18 19034784Subframe Build 20023169Cut And Chop Sheet1 [HtmlMaker 2.41] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx‎
I am looking at formula to return the column header, see example attached.
View 2 Replies View RelatedI have a table with the follow values (simplified version): A1:E1 have text headers B1:E1 have formulas to pull in text values. Some are blank. Some have repeat values. F1 has the value I want to look up. I need F2 to look at A2:E2 and compare to F1. It needs to pull in the corresponding A1:E1 value for the furthest to the right A2:E2 value.
Example:
Column A B C D E F
Row 1 Jan Feb Mar Apr May Imp1
Row 2 [blank] Imp1 Imp2 [blank] Imp1
F2 should return "May" as a value.
Screen shot attached.
screenshot.png
My file is set up like this:
Deal Jan Feb Mar....... Dec
A 0 11 0
B 0 0 23
C 13 0 12
and so on
Meaning deal A got cash of 11 in Feb and B of 23 in March
For a certain month (which could change), I want to specify the most recent month of a payment and return the month
So in April, row A returns 2, Row B March and Row C March
Cells A3:A500 contain product numbers, e.g. 1001, 1002, 1003 etc.. etc...
Cells G2:N2 are column headers, e.g. North2011, South2011, North2012, South2012 etc... etc...
Cell F2 is a lookup that will return a year, e.g. 2011, 2012, 2013 etc... etc...
Against each product is a "yes" if it was sold in the north or south region for each year. This could be both north and south, one or the other or none at all.
What I would like is a formula in cells E3:E500 that looks at the year in cell F2 and if there is a "yes" in either the North or South for that year to return "yes" otherwise blank.
I am unable to upload a sample document due to firewalls.
I'm working on a spreadsheet where I need to return the column header where the value in that row matches the criteria from an if statement.
The column headers are departments, the row headers are customers numbers, the values show the % of items sold in that department as a % of the total purchases by that customer.
I need to make a formula for each row so that if the % in any of the current row's values is 75%-100% then get the column header for the column that value is in.
I know it's an IF statement, but I don't know how to return the column header for the value when the if statement is true.
I'm trying to get all subjects that are "pass" per student #.
Student #MathScienceHistoryStatisticsPhysical EducationHealthPhysicsEconomicsTrigonometryEngineering
5200309PASSPASSPASS5200306PASSPASSPASSPASSPASS5200307PASSPASSPASSPASSPASS
5200305PASSPASSPASSPASSPASS5200257PASSPASSPASS3046109PASSPASSPASSPASS3045539PASSPASSPASSPASS
3045613PASSPASSPASSEnter Student #
If I type student number here the result will be shown below with all subject passed.Subject Passed
I have a table like the following where each ID can have no, 1 or multiple values associated with it:
Table1
ID>>>A>>>B>>>C>>>D
1>>>> >>> >>>10>>>
2>>>> >>> >>> >>>>50
3>>>5>>> >>> >>>>2
4>>> >>> >>> >>>>
I have another table that only lists IDs
Table2
ID
1
2
3
5
I want a VBA code such that if ID is in Table2, VBA looks for the matching ID in Table1 and if the matching ID found, it looks for ALL non-empty cells and if a non-empty cell is found in the row, it returns the value in the cell and the header to give something like this
Table3
ID>Column1>Value1>Column2>Value2
1>>>>c>>>10>>
2>>>>D>>>50>>
3>>>>A>>>5>>>>>>D>>>>>>>2>>>
Requirement
Vendors
Evaluation Results
Sr.
ITEM DESCRIPTION
BRAND
UNIT
A-Z
AL AMEEN
COLOR WORKS
INDEX
OXFORD
PENCIL
SUPPLIES STORE
WAVES
LOWEST PRICE
SECOND LOWEST
Vendor Lowest Price
Vendor 2nd Lowest Price
[Code] .......
I have above table and wants to get the formula for getting the 1) Vendor Name of the Lowest Price per item 2) Vendor Name of the 2nd Lowest Price per item 3) and be able to copy down the formula for other items.
I am trying to search a range for all of the nonblank cells, when I find one, return the column header and the value in that column. Vlookup won't work on this. It will only return a specified column.
Employee performance
ID area one | two | three
12947 23 | | 19
12948 32 | | 20
12948 |17 | 52
What I am trying to do is create a communication sheet. Employee ID 12947, your performance in area one= ______, in area two = ______ and so on.
I have on sheet1 a name "brent alpha" which I need to look up in sheet2 and return the header of which ever column it is under,
Sheet 2 consists of 3 columns with a list of data under each one. As I said all I want to do is return the header.