I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
I have a tab that has 2 columns of data and I want to be able to return a value in column A if my data matches column B. If column B has the text TRUETRUE, I want to bring back the corresponding data in Column A. How do I return all the data in Column A for all the TRUETRUEs in column B? I can only get the first instance of TRUETRUE.
View 4 Replies View RelatedI have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies View RelatedI want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
Example
Col A: red
Col B: red
Col C: red
Col A: red
Col B: blue
Col C: not found
I must match column A and column B to return the column C In colA there are all my countries In column B there are all my countries code and countries I want get the colC where all my colB match than colA.
View 14 Replies View RelatedI would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
The logic of the formula like this....
TAB X, Column A contains a data set, each row is a unique value. In column B of TAB X, I want to input a formula that performs the following logic: Search TAB Z, Column C, for an exact match of data contained in TAB X, Column A....and if found, look in TAB Z, Column D...if a blank cell is contained there, then in TAB X, Column A, say "Unsettled" ; however, if there does exist any character (not-blank) in TAB Z Column D, then in TAB X, COlumn A, say "Settled".....but, if the data ID listed in TAB X, column A is not found whatsoever in TAB Z, Column C, then say "NOT FOUND". So for example, within TAB X, Column A there is a unique ID in one of the rows "ABC123", then searches "ABC123" in TAB Z, Column C. If found, it looks in TAB Z, Column D and that cell is blank, so TAB X, Column B, same row that contains ABC123, the result is "Unsettled".
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
I'm working on a project in which I have 50 states + DC listed by 2-letter abbreviation, and want to return a value in another column that will be a non-unique number (some will duplicate in the second column.)
Also need to do this same operation with first column (state) and third column, which also is comprised of non-unique numbers.
Hlookup, lookup & pivot tables seem to not be a fit for this.
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
View 3 Replies View RelatedEssentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
Is there a formula to isolate observations in the same column (different values) and also all have the same column heading like the file attached?
View 2 Replies View RelatedI have "systems" that have multiple "units". I what to sum values for units that have EXACT MATCH in the system column. Example data is below.
I am trying things like =SUMIF(B:B,"EXACT MATCH",C:C)
How do I express exact match? For example the first 3 in the list I would want to return a value of 9. Note: Lists can have up to 3000 rows and > 1000 system ID's.
Unit ID
SYSTEM ID
Qty
MRK0012179
MRK0012179
3
[Code] ......
table1.jpg
I am looking for a formula that will satisfy the following:
1) find all the values in column "A" that match
2) In column "G", sum up all the values in "F" that go with the matching values in column "A"
3) For example, in rows 14-16, the values in column "A" match. Cell G16 sums up F14:F16
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
i just want to use vlookup and hlookup to give me the row and column headings for 30 to 40 sesor at a time.... but i keep getting #n/a whenever the functions meet a table of more than one column! (reduced workbook attached)
it should surely be simple to get this data - but i've struggled to no avail. I thought that having the four separate worksheets was the problem - but i haven't had any look even when i dump the data into a single worksheet!
i basically just want excel to return the cell reference of a sensor number which exists in a table. sometimes a sensor can appear more than once, but its not very common and i could happily work around that by doing the manual search (ctrl f, find all).
any advice would be very much appreciated, i'm struggling and the number of sensors i need to test will increase in the coming months.. please help!
should i even be using vlookup and hlookup? ive tried all the other excel functions, but they don't seem to be useful?
I have two files. They both have US census tract numbers in a column GEOID2010. One also has a CSA2010 text description associated with each census tract.
I need to match the cell with a census tract in the first file (example1).xlsx with the census tracts in the second file (example2.xlsx), and then return the CSA2010 text from the next column over to the first file.
I've attached two example files.
I have about 360 records in Column 1 and less columns in Column 2 (333 in this case). All the values in Column 2 are in Column 1. I need to be able to match those two columns up while keeping the data in Column 3 intact with it's corresponding value in Column 2. FYI I searched and found this thread: ttp://www.excelforum.com/excel-work...n-another.html
But my problem is that I have to tie in the values with column 3 to their corresponding values in column 2. In order to illustrate, I have attached an excel file in which I did the operation manually. (note: all values in column 2 are indeed in column 1 but not in the example as I have shown for the sake of convenience).
I have two DB extracts for 2012 and 2013 with customer id's that no not repeat across the year - columns A and B. I need to arrange this from:
2012
2013
270806
330011
330011
350529
350529
369916
to:
2012
2013
270806
0
330011
330011
350529
350529
0
369916
So the major idea is that the customers that are extinct in 2013 would appear as 0 in the Column B; customers that are the same would be aligned vs the previous year and new id's would appear on the separate row.
I have written many Index/Match and cannot figure out why I cannot create a formula for this.
View 1 Replies View RelatedIf i has this table name delivery
Table name is delivery and goes from a to p and 1 to 621.
I have column A of 700 usernames and column b with 85, I want to compare b with a and if appears in the list place a 1 in column C
View 1 Replies View RelatedWorking on an export from an e-commerce application that lists the item purchased, unfortunately not by item #, but rather a lengthy description. I'm trying to construct an item number based on that description which contains several constants.
Each item ordered appears in a single row, comprised of ORDERID, QTY, PRODUCT DESCRIPTION
I have several tables to pick out PRODUCT TYPE, COLOR, SIZE, etc. I need a formula to search to see which of the unique values appears in each in the cell and return the shortcut of that value.
PRODUCT DESCRIPTION example "Sweater - Blue - Large - Wool"
TYPE TABLE:
Sweater SWTR
T-Shirt TSHT
Jeans JEANS
COLOR TABLE:
Blue BL
Green GN
Purple PL
Black BK
I would have separate tables for each part of the description.
The formula I'm seeking would search the PRODUCT DESCRIPTION cell for the range of values for each 'part'. So it would search to see which of Sweater, T-Shirt, or Jeans was in the cell and then return the one that was - SWTR in this example. I would modify this formula for each 'part', in its own cell, and then use an =cell#&"-"&cell#&etc... to combine these returned values.
I know I can write a large if- chain using ISERROR & FIND, though some of these lists will get lengthy.
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()?
Is it as simple as:
Function DocumentType()
If(...........)
End Function
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I have 2 sheet
1-"Check Employee Hours"
2-"Check Hours"
Below is what Check Employee Hours looks like
Below is what Check Hours looks like
I want to the user to press ebutton i.e Sunday and macro does the comparison.
Process
I would like macro to look at sheet "Check Hours" column "E" (cell E4) and compare it against the sheet "Check Employee Hours" column "E" (cell E7). If the hours matches i would like to say OK on sheet "Check Hours" cell E4, if it doesn't match then say CHECK.
I have two separate workbooks, each with a great deal of information, such as name, ssn, dates, statuses, etc. I would like to compare the SSN column for both workbooks, and when it finds a match (which there would be many) to copy the MOS cell from the same row to the other workbook. Here is my breakdown with names:
Workbook 1: Macros.xls
Workbook 2: MASS 162.xls
The SSN column is column C in both workbooks
When there is a match found between the SSN column in Macros.xls and the SSN column in MASS 162.xls, I need to copy the MOS cell (column E) from the MACROS.xls workbook to the MASS 162.xls workbook into the same row, but in column M, which is currently empty.
i'm trying to figure out how i could get the sumproducts or anyway to get this forumla work basically i'm trying to have the cost column to vary depending on the variable set on column d & e on the top basically ...
* if d7 is between d2 and e2 use cost 1 for the multiplication to generate H1.
* if d7 is between d3 and e3 use cost 2 for the multiplication to generate H2.