I have an excel spreadsheet with multiple columns of options.
In column A, I select either "yes" or "no" to activate other columns.
In column B, I have, let's say, lease terms; 12, 24 & 36.
I'm trying to find a formula that I can enter that will take all the columns I select as yes, and tell me if the lease terms match up.
So, if I select yes in cells A4 & A13, are the lease terms in B4 & B13 the same...do they match?
I have two columns that use data validation. Column-F uses a dynamic named list in the validation and column-G validation is set to allow a decimal entry only. I need a third form of validation to compare the two values and an message when there is an error.
If F1="None" then the required entry in G1 must be 0 (zero). If F1 <> "None", then G1 entry can be any value greater than zero.
What I would like is a message box to pop-up explaining the error when F1="None" and G1>0.
I'm using a helper column-K that concatenates the cell values (in F:G) into a single string that I can check. Not having much success, but what I've tried so far is:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim myrange, mycell As Range
On Error Resume Next
Set myrange = Sheets("Copper Data").Range("K10", Range("K65536").End(xlUp))
For Each mycell In myrange
If mycell.Value = "No Scrap0" Then MsgBox ("You entered a scrap reason of 'No Scrap' and quantity of 0")
Next mycell
End Sub
It either fires all the time if the helper cell string is "No Scrap0" or it doesn't fire at all if the string is "NoScrap1" (where "1' can be any number).
Currently trying to build this, but my fledgling VBA knowledge has me hamstrung. I'm getting an error of "Next without For').
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim r, c As Range
Dim note As String, Response As Long
note = "Data Entry Error: Scrap Quantity cannot be greater than zero with a reason code of No Scrap." & vbLf & vbLf & _
"Please check the accuracy of your entries."
I have two sheets:
- sheet 1 ('current')
- sheet 2 ('31May')
The data in column C is the same, although sorted differently and can't be re-sorted to be the same. Where the data in column C is the same in both sheets, I want to fill columns A and B into sheet 1.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
what I'm after is a macro to check the contents of Column 'A' against column 'B' and display any duplicates in Columns 'C' & 'D'.
N.B. The headings of Columns C & D are :-
C = Value Found in Column A
D = Value Found in Column B
Any duplicate entries logged in columns C & D should be listed in C2,C3,C4....C20 and D2,D3,D4......D20 etc (in effect creating two new lists)
2014-07-30_16-52-23.png
Fist I want to compare ColB=ColH, if TRUE, compare colA=colG, if TRUE, again compare colC=colI, IF all this conditions true, then give (colD-colJ) on colL.
all the unmatched rows in 2 tables to populate with different for each table
I need to compare add Column A&B in sheet1 and column A&B in sheet two and compare the two result for the difference(like vlookup).
formula to merge two cells in two sheet and compare.
i've check the other threads on how to compare two columns but for some reason it is still not working for me.
I have 2 columns. Column A is the master column and column B is the comparing list. If the company that is listed in Column B (Anywhere in column B) matches exactly with the company name in column A, I would like it to say "check" in column C.
I have two diffrent sets of columns of data on a spreadsheet one column set is A,B the other is D,E I want a formula or makro that will check columns A,B and compare it to D,E and if it finds a match will paste it in G,H is that possible and how would I do this?
View 9 Replies View RelatedI have two worksheets but have a same column named "Admin No.". I will need to compare the 2 "admin no." column.
Example:
Worksheet 1
Admin No.Name
1111Ali
2222James
3333Janet
4444Lihua
5555Ting Ting
6666Jasmine
Worksheet 2
Admin No.Name
1100Alvin
2200John
3300Mavis
4411Haoyi
5555Ting Ting
6677Jason
I will ike to compare both "admin no." column and when worksheet 1 5555 can be find in worksheet 2, it will return True. 6666 cannot find in worksheet 2 then it will return false.
I have numeric value in columns B, D, F, H.
I want to compare the values of these four cells in each row and update columns M (with the minimum value) and N (with the column of minimum value).
How can I manage this comparison?
I need to compare two columns A and B with a result in column E. BUT I don't want the result to be added together. ( since it's receipt numbers ) SO my formula is incorrect I need a formula that will show the receipt numbers next to each other divided by a comma or forward slash...
View 7 Replies View RelatedI have column A with 228 rows and column D with 314 rows. Both columns have the same data except that D has different data. I would like to line up everything that is the same in A and D and everything else in column D that is not the same move to G. Is there a quick way to do this?
View 5 Replies View RelatedI can find lots of ways to compare two lists with single columns, but I need a very basic guide to comparing multiple ones across two sets of data and then highlighting or extracting the unique records. I would prefer to keep the data in the existing columns for later sorting and other purposes.
I currently have the two datasets as two separate worksheets in an Excel 2003 file. The two datasets consist of the same three columns containing strings of text, but there is quite a difference in the number of rows. Dataset One is c. 3550 records, Dataset 2 is c. 1600. There are no duplicate records within each dataset, but there are duplications across the datasets and the records are in a different order, so it's not a matter of comparing Row 1 to Row 1 and so on. The data look a bit like this (semi-colons to show columns):
DATASET 1
Group;Family;Name
PM;Smith;Mary Anne
PM;Jones;Fred Henry
PD;Wilson;Peter John
PG;Green;William Laurence
...............
I need a Vlookup to look at two columns when searching. here is an example:
Sheet 1 is my report grid to hand out to the employees, A1 has a drop-down list with my employees names and A2 one for the month, when you click an employee name the vlookup formula fills in the information from sheet 2 (data sheet).
Sheet 2 has data like: Col 1= Month, col 2=employee L-name, col 3= production etc...
currently the vlookup formula messes up because the employee name is in there multiple times because of the months column, i have to delete all months except the one i need. formula is: =vlookup(A1,'sheet2'!,B:C,2,false)
this formula will pull the data in sheet two column 3 (production) for the employee that matches.
how can i make it compare first to col 1 (month) and then col 2 (employee).
I want to compare Columns A and B and Insert value in C.
So if Column A is null, then place value of column B in C, otherwise place Value of A in C.
I want to compare two Excel workbooks which have multiple columns and identify the rows only if all the valves match in both the workbooks, i am attaching a file to understand better.
View 3 Replies View RelatedI have two columns that each contain about 100 serial numbers. Most of the serial numbers shoud be in both columns. How to I determine if there is a serial number that is only in one of the columns and not in the other?
View 4 Replies View RelatedI want to compare many columns and find duplication in the last one;
Example:
Column A Column B Column C Column D Column E
1234 1234 1 A OK
1235 1235 1 A OK
1236 1236 3 A OK
1237 1236 0 A OK
1238 1236 1 B Duplication found in different column
1239 1238 0 A OK
To get Column "C" which is calculate how many numbers in that row are repeated with respect to Column "B", I solve it by using : =COUNTIF(B:B,A2) ;
But I want to get a result of duplication in "Column E" by see if "Column B" + "Column D" has the same value regardless of number then say "OK", but if it is not than the before, then write "Duplication found in different column".
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91'
Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings.
I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.
i'm trying to do some analyzing on an excel sheet and was seeing if there was a function that I could use to speed this up.
So in the file...
I want to Group what's in Column A So the 1's together and the 2's together... Once that is selected I want to know what the largest number in Column C is...
So if the function can select 1 in column A then tell me that 10 is the biggest number in Column C....
I'm trying to compare the 1st 7 days average this year vs the 1st 7 days average last year. How do I write the formula?
Last YearThis Year
536,212
852,865 417,290
345,981 702,816
850,560 189,808
335,285 691,152
572,165 283,036
842,145 404,916
735,364 528,332
121,475
348,793
697,944
876,360
671,170
928,103
I would like to have a macro or a function, which could compare two "A" columns in different workbooks. macro should run from the first one wb, which gonna have less data in a column than wb2. so, if, let's say, A3 in wb1 differs from A3 in wb2, an empty row should be added in wb1, and now we would jump and compare A4 in wb1 with A4 in wb2 and so on..
View 2 Replies View RelatedI have problem comparing dates in two columns. In these columns, with dates, there can be instead of date letter "X". When I try to compare dates I don't get good results. I have to see that date in column P has been before date in column Q (example 22.02.2012 (P), 23.02.2012(Q), OK).
Code:
Sub test()
For Each oneCell In Range("Q2:Q60001")
Select Case oneCell.Value
Case Is "X"
If oneCell.Offset(0, -1) "X" Then
[Code] ........
I need to compare 2 lists (each list has 3 columns [first name, last name and email address).
I am trying to compare columns A(incl. First name), B(incl. Last name) and C(incl. email address) to columns D, E and F.
D, E, and F are also First name, Last name and e-mail address respectively.
I need to compare A, B, and C to D, E, and F and find duplicates and highlight them.
I have a spreadsheet of products that are listed in column A and another list of products in column B. I need to find the difference in price in a percentage for each product. My problem is the lists differ a little bit in that there are more products in column A so they are not lined up correctly. Is there a way to have excel look in column A and find the match in column B and then line them up so the matching products are in the same row? This will cut out a lot of time having to do the formula in each cell rather than autofilling the formula.
View 1 Replies View RelatedIf our work for the intersection of two columns A, B supposed to be output 1, 2 and 3 Required to find the remainder of the A and show it automatically in column C The remainder of the B reveled in column D
Note: columns A,B repeat accepting of figures
To explain the result of the remaining column A is 1, 1, 5
LIST1
LIST2
RESULT
1
1
1
1
2
1
[code]....
I have a worksheet where I want to compare values in two of the columns.
In column B there are EAN codes consisting of 13 digits.
In column E there are 5-digit numbers.
What I want to do is to compare the 5 digit number with the EAN code where these digits should be in position 7-12 in the EAN code. Those numbers in column E that doesn't have a match in column B should be marked (for example that the background color of that cell is set to "red").
Example:
B E
XXXXXX12345X 12345 (match - do nothing)
XXXXXX12346X 12346 (match - do nothing)
XXXXXX12348X 12347 (no match - set background color to red)
XXXXXX12349X 12348 (match - do nothing)
XXXXXX12350X 12349 (match - do nothing)
XXXXXX12351X 12352 (no match - set background color to red)
There are more values in column E than B.
In all there are close to 4500 rows so I really could use a nifty macro to do this job.
I receive hundreds of excels which I combine into one sheet for input into a program (which I don't know much about). The combined sheet contains 2 columns repeated with different information. For instance Column A is Category, Column B is Dollar Amount, Column C is Category,
Column D is Dollar Amount and so on.
I then start with Column A and compare it to Column C to make sure the categories match. If C is a new category (not listed in Column A) I shift columns A and B down one and add the new category to Column A. This updates my master list in column A but also maintain the format and correct dollar amount that was listed in Column B. Then I move to Column E and compare it to A using the same logic.
I repeat this process throughout hundreds of columns. I then delete all the category columns and am left with Column A as a master category list and all the dollar amounts in the correct location for all excels that have been sent in. I'm hoping someone here knows a faster way for me to do
this using VB or VBA for Excel or a Macro. I've tried a few things I've found on these forums to no avail, and I'm not an expert when it comes to this. This currently takes me days to complete, and I know it should not take this long. Please save my sanity!
i want to compare data between 4 columns, 2 columns of data is in Sheet 1 and 2 columns of data is in sheet2. Data starts at A5 in both worksheets. Data consists of stock codes and there holdings. Sheet 1 data is real data the primary source, sheet 2 data is a bit of real data and incorrect data.
My data in sheet 1 is layed out as below, this is just a sample, real data has around 1500 stock codes and holdings.
Starting at A5
Col A (Stock) Col B (Holdings)
5 aap 10500
6 aax 10987
7 aas 76544
Sheet 2 data is layed out as above but holdings may differ, so
Col A(Stock) Col B (Holdings)
5 aap 10500
6 aax 10300
7 aas 76534
I need a formula which will tell me which stocks holdings have changed in sheet 2 compared to sheet1.