I have two columns that each contain about 100 serial numbers. Most of the serial numbers shoud be in both columns. How to I determine if there is a serial number that is only in one of the columns and not in the other?
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I have two large ranges of numbers stored as text.
I would like to compare first element from first one to each of the second, make a shortlist, and then further analyze the data on shortlist by some additional criteria.
After that the result is written to some place and the cycle continues with the second element from first range etc
Question:
Is it possible (in VBA) to create temporary arrays(baskets) where the fist set of data is analyzed and then after obtaining the result, array(basket) would be emptied and new sets of data is loaded and the cycle goes again?
I have two numerical columns of different length. One presents the signal and another one the background. Most of the background numbers are found in the signal column but they are not exactly the same and not located in the same rows. The numerical values are the same within some tolerance that I can specify. What I am trying to do it to remove all the background values from the signal column.
I want to compare 3 columns of data across the same row with an IF statement to verify that all 3 numbers match. I would like the IF statement to only look to the first decimal place, rather than the entire number. In the first example, all columns equal. In the second example all columns equal only to the first decimal place. In either case, all 3 numbers would be equal when rounded down to one decimal place.
Example 1 Column A Column B Column C 84.5 84.5 84.5
Example 2 Column A Column B Column C 84.51 84.53 84.52
Fist I want to compare ColB=ColH, if TRUE, compare colA=colG, if TRUE, again compare colC=colI, IF all this conditions true, then give (colD-colJ) on colL.
all the unmatched rows in 2 tables to populate with different for each table
I have an If loop which looks like: If x < 54.5 And x > 52 Then
I have declared x as "Long", but still when it does the comparison it seems to round x up to the nearest whole number for the second comparison ( x > 52 ).
I have a worksheet with property numbers in colum A and first names in column B. Another worksheet has property numbers in A, first names in B, and last names in C (different order, all mixed up)
I want to put a formula in the first worksheet that will compare the property numbers and when it finds a match put the last name from the second worksheet into the first. Does that make any sense? I have tried vlookup but i'm obviously doing something wrong. example below....
# first last 123 x 124 y 125 z
another sheet looks similar but has info in the "last" column. the numbers between the two sheets are not in the same order so i need to search by number and put the info from the second sheet into the first.
The value stands for the Periodnumber and a Year so P1'08 stands for period 1 in the year 2008.
In cell H2 I want the following:
If value in cell H1 is the same as B2 or C2 or is in between these periods then the value in H2 should be the value of cell D2. If not the H2 should be empty.
I work for a charity and I have to cancel the donations of people whose credit card donations have been declined in three consecutive months.
If in Column A I have a list of donor IDs whose credit cards were declined in Jan 2008, in Column B I have a list of donor IDs whose credit cards were declined in Feb 2008 and in Column C I have a list of donor IDs whose credit cards were declined in Mar 2008, is there a way of showing in a fourth column which donor IDs were common (repeated) in Columns A, B and C? I would have a title for each column in A1, B1 and C1, and also the column where the repeated donor IDs would be displayed.
I have a column of numbers (column A) which I'd like to compare to an adjacent column of numbers (column B) and, by row, determine if the number is larger.
If it is, I'd like to place a different colour on the cell. What is the formula I need to use to accomplish this?
Ex: Col A Col B 30,000 5,000 - A is larger than B, therefore A is formatted RED 20,000 20,000 - A is the same as B, therefore no format applied 10,000 15,000 - A is less than B, therefore A is formatted GREEN
i've check the other threads on how to compare two columns but for some reason it is still not working for me.
I have 2 columns. Column A is the master column and column B is the comparing list. If the company that is listed in Column B (Anywhere in column B) matches exactly with the company name in column A, I would like it to say "check" in column C.
I have two diffrent sets of columns of data on a spreadsheet one column set is A,B the other is D,E I want a formula or makro that will check columns A,B and compare it to D,E and if it finds a match will paste it in G,H is that possible and how would I do this?
I will ike to compare both "admin no." column and when worksheet 1 5555 can be find in worksheet 2, it will return True. 6666 cannot find in worksheet 2 then it will return false.
I need to compare two columns A and B with a result in column E. BUT I don't want the result to be added together. ( since it's receipt numbers ) SO my formula is incorrect I need a formula that will show the receipt numbers next to each other divided by a comma or forward slash...
I have column A with 228 rows and column D with 314 rows. Both columns have the same data except that D has different data. I would like to line up everything that is the same in A and D and everything else in column D that is not the same move to G. Is there a quick way to do this?
I can find lots of ways to compare two lists with single columns, but I need a very basic guide to comparing multiple ones across two sets of data and then highlighting or extracting the unique records. I would prefer to keep the data in the existing columns for later sorting and other purposes.
I currently have the two datasets as two separate worksheets in an Excel 2003 file. The two datasets consist of the same three columns containing strings of text, but there is quite a difference in the number of rows. Dataset One is c. 3550 records, Dataset 2 is c. 1600. There are no duplicate records within each dataset, but there are duplications across the datasets and the records are in a different order, so it's not a matter of comparing Row 1 to Row 1 and so on. The data look a bit like this (semi-colons to show columns):
DATASET 1 Group;Family;Name PM;Smith;Mary Anne PM;Jones;Fred Henry PD;Wilson;Peter John PG;Green;William Laurence ...............
I need a Vlookup to look at two columns when searching. here is an example:
Sheet 1 is my report grid to hand out to the employees, A1 has a drop-down list with my employees names and A2 one for the month, when you click an employee name the vlookup formula fills in the information from sheet 2 (data sheet).
Sheet 2 has data like: Col 1= Month, col 2=employee L-name, col 3= production etc...
currently the vlookup formula messes up because the employee name is in there multiple times because of the months column, i have to delete all months except the one i need. formula is: =vlookup(A1,'sheet2'!,B:C,2,false)
this formula will pull the data in sheet two column 3 (production) for the employee that matches.
how can i make it compare first to col 1 (month) and then col 2 (employee).
I want to compare two Excel workbooks which have multiple columns and identify the rows only if all the valves match in both the workbooks, i am attaching a file to understand better.
I want to compare many columns and find duplication in the last one;
Example:
Column A Column B Column C Column D Column E 1234 1234 1 A OK 1235 1235 1 A OK 1236 1236 3 A OK 1237 1236 0 A OK 1238 1236 1 B Duplication found in different column 1239 1238 0 A OK
To get Column "C" which is calculate how many numbers in that row are repeated with respect to Column "B", I solve it by using : =COUNTIF(B:B,A2) ;
But I want to get a result of duplication in "Column E" by see if "Column B" + "Column D" has the same value regardless of number then say "OK", but if it is not than the before, then write "Duplication found in different column".
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91' Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings. I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.