I have problem comparing dates in two columns. In these columns, with dates, there can be instead of date letter "X". When I try to compare dates I don't get good results. I have to see that date in column P has been before date in column Q (example 22.02.2012 (P), 23.02.2012(Q), OK).
Code:
Sub test()
For Each oneCell In Range("Q2:Q60001")
Select Case oneCell.Value
Case Is "X"
If oneCell.Offset(0, -1) "X" Then
I have two columns, salesman and date. This workbook tracks quotes by salesman. I need to know how many quotes for each salesman by the month. So what I need to know is how quotes salesman 'a' had in January and February and so on. I have several worksheets in this workbook that are all formatted the same.
I have two columns containing dates (Date1 and Date2). Date1 is like a long date and Date 2 is a short date. I need a macro to compare these two dates and delete rows where Date1 <> Date2. Please find attached the before and after file which also contains the date formats for these two dates.
I have two identical web query's on the same sheet. One from column A to column I and the other one from column K to column S, and both have 404 rows. The one on the left (from column A to I) autorefreshes every 60 minutes and the one on the right (from column K to S) autorefreshes every 4 minutes. I want to subtract the numbers in column Q from column G and the ones in column R from column H, and in both cases if the result is bigger than 0 to place a timestamp in column Y(for Q-G), and in column Z (for R-H). I tried with NOW formula, but the timestamp changed every time the web query from the right autorefreshed, no matter of the result. I guess that I have to use VBA codes...but I'm not good at that .
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long lngBegin = 9 'beggining of data lngEnd = 232 'end of data lngCmp = InputBox("Please enter the date", "Begining of the week")
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due.
Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today()
Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
Fist I want to compare ColB=ColH, if TRUE, compare colA=colG, if TRUE, again compare colC=colI, IF all this conditions true, then give (colD-colJ) on colL.
all the unmatched rows in 2 tables to populate with different for each table
i've check the other threads on how to compare two columns but for some reason it is still not working for me.
I have 2 columns. Column A is the master column and column B is the comparing list. If the company that is listed in Column B (Anywhere in column B) matches exactly with the company name in column A, I would like it to say "check" in column C.
I have two diffrent sets of columns of data on a spreadsheet one column set is A,B the other is D,E I want a formula or makro that will check columns A,B and compare it to D,E and if it finds a match will paste it in G,H is that possible and how would I do this?
I will ike to compare both "admin no." column and when worksheet 1 5555 can be find in worksheet 2, it will return True. 6666 cannot find in worksheet 2 then it will return false.
I have two tables (sheets) that I am working with. One has only the date and the other has date and time in the same column. Here are examples:
Date Count
8/22/2014 8/23/2014 8/24/2014 Date Data 8/22/2014 20:05 1
[Code]...
I need to count all of the entries for each day. If I use the following formula it returns a zero because the one sheet only uses date while the other includes time as well:
[Code] ......
However, if I go to Sheet2, insert a new column and use the follow formula to only pull the date from the date/time cell.
[Code] .....
(I drag this down so that each row now has a value with only the date value in it), and compare against this new column, it works like a charm.
However, my goal is to be able to not create this additional column and just add the INT formula into the COUNTIF formula. For example, if I try doing this:
[Code] ......
I get a nondiscript formula error.
How I can compare the date column to the date/time column without having to create a new column on sheet2 using the INT formula?
I want to have a new macro/button to redo the chart cells based on the dates in cols T and U (abt 400 entries). T has the start date and U has the end date.
Row 9 - X9: CJ9 have dates for about 10 months (weekdays only) Column J have either of these two values: A or B Column C has either of these two values: C or blank
I would envisage it going through each row, checking:
If date at top of that col was between the dates in cols T & U then if col J = 'A' then set cell to black block else if col J = 'B' then if col C = C (closed) then set cell to red block else set cell to blue block
I need to compare two columns A and B with a result in column E. BUT I don't want the result to be added together. ( since it's receipt numbers ) SO my formula is incorrect I need a formula that will show the receipt numbers next to each other divided by a comma or forward slash...
I have column A with 228 rows and column D with 314 rows. Both columns have the same data except that D has different data. I would like to line up everything that is the same in A and D and everything else in column D that is not the same move to G. Is there a quick way to do this?
I can find lots of ways to compare two lists with single columns, but I need a very basic guide to comparing multiple ones across two sets of data and then highlighting or extracting the unique records. I would prefer to keep the data in the existing columns for later sorting and other purposes.
I currently have the two datasets as two separate worksheets in an Excel 2003 file. The two datasets consist of the same three columns containing strings of text, but there is quite a difference in the number of rows. Dataset One is c. 3550 records, Dataset 2 is c. 1600. There are no duplicate records within each dataset, but there are duplications across the datasets and the records are in a different order, so it's not a matter of comparing Row 1 to Row 1 and so on. The data look a bit like this (semi-colons to show columns):
DATASET 1 Group;Family;Name PM;Smith;Mary Anne PM;Jones;Fred Henry PD;Wilson;Peter John PG;Green;William Laurence ...............
I need a Vlookup to look at two columns when searching. here is an example:
Sheet 1 is my report grid to hand out to the employees, A1 has a drop-down list with my employees names and A2 one for the month, when you click an employee name the vlookup formula fills in the information from sheet 2 (data sheet).
Sheet 2 has data like: Col 1= Month, col 2=employee L-name, col 3= production etc...
currently the vlookup formula messes up because the employee name is in there multiple times because of the months column, i have to delete all months except the one i need. formula is: =vlookup(A1,'sheet2'!,B:C,2,false)
this formula will pull the data in sheet two column 3 (production) for the employee that matches.
how can i make it compare first to col 1 (month) and then col 2 (employee).
I want to compare two Excel workbooks which have multiple columns and identify the rows only if all the valves match in both the workbooks, i am attaching a file to understand better.
I have two columns that each contain about 100 serial numbers. Most of the serial numbers shoud be in both columns. How to I determine if there is a serial number that is only in one of the columns and not in the other?
I want to compare many columns and find duplication in the last one;
Example:
Column A Column B Column C Column D Column E 1234 1234 1 A OK 1235 1235 1 A OK 1236 1236 3 A OK 1237 1236 0 A OK 1238 1236 1 B Duplication found in different column 1239 1238 0 A OK
To get Column "C" which is calculate how many numbers in that row are repeated with respect to Column "B", I solve it by using : =COUNTIF(B:B,A2) ;
But I want to get a result of duplication in "Column E" by see if "Column B" + "Column D" has the same value regardless of number then say "OK", but if it is not than the before, then write "Duplication found in different column".
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91' Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings. I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.
i'm trying to do some analyzing on an excel sheet and was seeing if there was a function that I could use to speed this up.
So in the file... I want to Group what's in Column A So the 1's together and the 2's together... Once that is selected I want to know what the largest number in Column C is...
So if the function can select 1 in column A then tell me that 10 is the biggest number in Column C....
I would like to have a macro or a function, which could compare two "A" columns in different workbooks. macro should run from the first one wb, which gonna have less data in a column than wb2. so, if, let's say, A3 in wb1 differs from A3 in wb2, an empty row should be added in wb1, and now we would jump and compare A4 in wb1 with A4 in wb2 and so on..