I work for a financial firm. Every morning I compare today's cash balance file (sent from our custodian) with yesterday's to see if there is anything different in each portfolio cash balance column. Right now I'm doing it manually checking row by row. It'll become tedious if more and more portfolios are added. I'm looking for an efficient way I can use the portfolio codes column (as a key) to compare with previous day's file’s portfolio codes column , and list only those portfolios(in another workbook) if the corresponding cash balance column doesn't match. This is what I started doing:

Private Sub compare_cash_bttn_Click()

Dim b1 As Workbook, b2 As Workbook, b3 As Workbook

Dim w1 As Worksheet, w2 As Worksheet, w3 As Worksheet

Dim i As Integer

i = 2

Set b1 = Workbooks("CashA")

Set b2 = Workbooks("CashB")

'Set b3 = ActiveWorkbook

Set w1 = b1.Sheets(qry4rCash).........................

I have got 2 excel workbooks with multiple worksheets (around 6 megs in size). Is there a way i can do a quick comparison which will point out the differences between the cells?

workbook1 column A has tag numbers, workbook2 column A also has tag numbers. I want to compare the 2 columns and if the tag number in book 1 is also in book 2 i want it to return 25B-F138-28-01 in column B workbook1.

way I can check workbooks, and compare it to make sure they have the same exact data. What I would like to do ---

-I have 76 workbooks, and in each workbooks I have 12 worksheets -I would like to compare, Table01_cue.xls to Table01_Master.xls to make sure that A1:N76 (sheet Jan) in Table01_cue.xls match with A1:N76 (sheet Jan) in Table01_Master.xls, The range in each worksheets changes … for sheets Feb it is range from A1:O76… is there a way to check this?

And if the data doesn’t match up I would like it to tell me where it doesn’t match up…

I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".

Got a road block on one of the trackers which I am trying to create which compares some of our agreements. Basically we need to compare current production with our contracts and then bring the tier level they are at in order to then calculate how much in overrides we receive. Belwo is an example:

Input Value = 140000 Out Should be = 1.5%

Set of Values 1 T1 T2 T3 T4

[Code]...

In a nut shell it will look for 14000 in set of values 1 and pick T3 to then go in set of values 2 and display corresponding T3 which will be 1.5% in above example as output.

I need to compare the value's on 2 cells. I have a sheet setup for my sales I would like to compare each day of the week. So in other words I would like to compare this Monday with last Monday and know what the percentage of my sales ether up or down is.

Example: Last Monday = sales $100.00 This Monday = Sales $200.00

100%

So If sales are up I would like the percentage amount font to be in green. But if sales are down I would like the percentage amount to be in red.

I have a football score system and wish to compare the values of various cells - 2 if possible, but more if not possible.

Essentially I have a list of predictions for the score of a game (e.g. 2-1, 1-0, 0-0, 2-2 etc) in a spreadsheet, and I have a cell where I enter the correct scoreline (e.g. 2-1). The way the points system works is that if the prediction is correct (i.e. 2-1) then that player gets 3 points. If the result/outcome is correct but the scoreline is incorrect (i.e. 1-0) then the player gets 1 point. If they result/outcome and scoreline are incorrect, then that player gets 0 points.

Ideally I would link to compare 2 cells - predicted score and actual score, where the format of the scores is entered as 2-1.

However, I feel this may be easier having to columns for the score - Column A = 2 Column B = 1. In this way the scores only need to be compared cell by cell, however they would need to be compared by value for the correct outcomes.

As you can see there are certain numbers that are missing between column B and A. I want to know which of the numbers that are present in column B are missing in column A ...any handy calculation ?

How would I write a IF statement comparing 3 values. For example the field that it would be referencing would have values cell E51(1,2,3,4,5,6,7,...99). The pull back would be:

I want to return the proper value from sheet 2 into column C in sheet one. I have the current formula set up as an array but I only get the value that matches the first row in Sheet 2.

HTML Column A Column B Column C Date Number Who 3/23/2007 902-555-2596=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-123-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-123-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-678-0352=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) 3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,) ~~~~~~~~~~~ Sheet 2 ~~~~~~~~~~~~~~~~~ Column A Column B 902-555-7958Big Bird 902-555-5100Daffy Duck 902-678-0352Elmo 902-555-5752Donald Duck 902-555-7420Bert 980-123-6621Ernie 902-555-2596Grover

I have two columns A and B. I need a count of how many times a value in B is greater than the same row in A. I don't want to insert a new column (e.g. for if statements to add up).

Can I insert a countif at the top to do that? I tried various countif variations but could not find the right one. Additionally any other option that does not involve adding new columns/rows.

I have a cell (F2) that is auto updated with total sales units for today (Its a simple counter of individual sales). I want to detect when there is a "batch" of sales >= 10. ie. F2 may start at zero for the day and increment by 1,2,5 or 10 units at a time. If the increment is 10 units or more I would like to detect this and store the result in cell G4.

Typical values in C2: 0, 1, 6, 7, 9, 19, 21, 22 etc as new orders arrive. The larger order between 9-19 (viz 10 or more), I need to detect and store in G4. I know that I need to use both the current value of F2 (say 19) and the previous value of F2 (say 9) to perform this, but the solution eludes me.

I’m attempting to find values that are within a band of .001 of the values of cells in columns L through O and searching columns B through I for values that meet the .001 criteria and copying the values to columns Q, R, S, and T respectively.

I mentioned the values in L, M, N and O are where the comparisons will be made and these values are tagged to a specific date in Column K. I need to find the dates in Column A that are in between the values of K and the cell beneath it. For example, in K4 I have a date of 10/3/99 and the next date I have in K5 is 10/5/99. I would then query Column A for the dates 10/06/99 (A4), 10/07/99 (A5), and 10/08/99 (A6). The values I need to find within the .001 band are in Columns B through I (B4:I6). Lastly, when reach the last value in Column K, query all values in Column A greater than last value in K and copy the appropriate values in B through I to Q through T.

Rules for copying data to Column Q, R, S, and T:

For Column Q- Find values in B, C, or D that’s within plus or minus .001 of M and copy the value of B, C, or D into Column Q of the same row.

I'll try my best to explain what I'm trying to do here using Excel macro (i've very limited knoledge in VBA ). I am working on a project where I'm using an actuator to measure micro-switches. The values are then extracted using HyperTerminal via RS232 and transferred to Excel to filter the values and display only the ones that are important.

Here is what I'd like to do via a Macro:

Compare cells in column A (e.g A1 and A2, A2 and A3, A3 and A4 etc.)

Example:

A 0 300 550 1200 1700 1900 2200 2000 1850

[Code]....

So first, if the values increase, do nothing and keep comparing other values. If we find the values decrease, display the larger value between the two, in this case it's the value 2200 that we want to display.

Next, the values will be decreasing progressively. We'll do the comparison between 2 values but this time if the values decrease, do nothing until we find a value increases. Display then the smaller value between the 2, here it's 1500.!

The following formula (thanks to Barrie) determines if the difference between 2 values equals a third value, within a fourth ‘margin of error’ value, and returns either True or False.

I'm trying to do here using Excel macro (i've very limited knoledge in VBA ). I am working on a project where I'm using an actuator to measure micro-switches. The values are then extracted using HyperTerminal via RS232 and transferred to Excel to filter the values and display only the ones that are important.

Here is what I'd like to do via a Macro: Compare cells in column A (e.g A1 and A2, A2 and A3, A3 and A4 etc.)

So first, if the values increase, do nothing and keep comparing other values. If we find the values decrease, display the larger value between the two, in this case it's the value 2200 that we want to display.

Next, the values will be decreasing progressively. We'll do the comparison between 2 values but this time if the values decrease, do nothing until we find a value increases. Display then the smaller value between the 2, here it's 1500.

I am aware this question must have been asked to death on this forum and I already searched and found some answers but for some reason I can´t get it to work. I have two worksheets (sheet1 and sheet2). In Column E of Sheet1 I have product descriptions that I want to compare cell by cell to the product descriptions in Column F of Sheet 2. If they are not the same, color in the cell in Sheet 2. There are 1810 rows in both columns. I tried this method but it gives me an error (in spanish) that says that I cannot compare ranges of data.

I have also seen some code to do something similar (http://www.ozgrid.com/forum/showpost...85&postcount=3 ):

Sub find_cell() Range("A:E"). Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate ar = ActiveCell.Row ac = ActiveCell.Column ' the two lines above store the row and column values of the cell found ' in your example ar is going to be equal to 229 and ac is 3 ' now this following lines are to change the colors to red With Cells(ar, ac).Interior .ColorIndex = 3 .Pattern = xlSolid End With End Sub

I don´t quite get the "Range("A:E").Find(What:=Cells(2, 6).Value, LookAt:=xlPart).Activate" part though.

I have an attendance sheet that employees scan their badge number, and returns their name and time/date stamp using a simple VLOOKUP.

I want to create a report that compares the names in the attendance sheet against the all the names in the master sheet, and only returns the names that have not attended the training.

I have tried a few test formulas using COUNTIF function, but with no luck.

I have attached an example. Use the worksheet labeled April 2014 A (2nd shift)

New Six Point Safety with Attendance Sheet Barcode Scanning.xlsxâ€Ž

I am facing a problem in evaluating a problem. I am referencing from the screenshot of excel file. I want to replace the values of Column-C for which column-A matches with column -G. And, the remaining will remain same.

I am using a formula for weeknumbers and formatting cells based on their values but have just realised it will not work at year end.

The formula in D2 is as follows: =IF($C2<$O2,"green","blank")

C2 is the weeknumber of an incident based on the actual date in B2 (e.g. 01/06/2014) and uses the formula: =WEEKNUM(B2). O2 is the weeknumber of the current day and uses the formula: =WEEKNUM(NOW()).

So cell D2 states "green" if the incident happened over a week ago, and states "blank" if the incident happened in the current week.

If I used this at year end when the incident weeknumber may be 52 and the current weeknumber may be 1 - the formula would not work as it would state "blank" rather than "green", even though the incident happened over a week ago.

How can I get the year encorporated within the weeknumber?

I'm trying to compare the values of columns B and G and if any of the cells are G < B, I would like to move the whole row into the second worksheet. And only if possible, it would be awesome if the macro could check column A for duplicates before the value comparison and sum up the column B if there are duplicates. In my example row 6 and 7 on column A have the same suppliers code and the amount totals to 2.

In this case for example, the value of the third row of G is lower than B, and therefore I would like the whole row 3 to be cut out from worksheet 1 and moved to worksheet 2.

Original view of sheet 1: SUPPLIERSCODE ORDERAMOUNT PRODUCTNAME BARCODE

I am trying to compare to values that a user inputs in a user form. It's ok if they are not the same I just want the user to know it. I am only including the part where the if statement is failing:

VB: If Me.VSLongQuant.Value <> Me.VSShortQuant.Value Then MsgBox VerUnBal If VerUnBal = vbNo Then Exit Sub End If End If

I have VerUnBal as Long and defined as:

VB: VerUnBal = MsgBox("The Long and Short option Qunatities are not equal." & Chr(13) & _ "Is this intended to be an unbalanced vertical spread?", vbYesNo, _ "Unbalanced Spread Alert")

I can provide more info as necessary. There are two problems 1) the message box is appearing whether the numbers are equal or not, and 2) clicking No in the message box does not cause the Sub to exit.

I'm new to macros and VBA so I am wondering if it is possible for a macro to compare values in column B of sheet2 and column B of sheet3 and for the values that DON'T match i.e. unique values to column B of sheet2, copy row from sheet2 to sheet4? This will aid my processing time drastically if I can copy all the rows from sheet 2 to sheet 4 where the model number in column B of sheet 2 doesn't appear in column B of sheet 3!!

If I am working from cell (D16), I am looking for a formula to compare the value in 2 different cells (D8 and D12) to a value in a third cell (D14) and the one with the closest value without going over returns a seperate value from either (D7 or D11), But if both D8 and D12 are above the value of (D14) then the closest value would be the answer and return the answer from (D7 or D11).

Example: D7=Bob and D8=25 D11=John and D12= 40 D14= 45 D16 (answer cell) =John OR: D7=Bob and D8=46 D11=John and D12=48 D14=45 D16 (answer cell) =Bob