Compile Error - Adding Record To Excel Spreadsheet Via A Form
Jul 15, 2014
I'm trying to tweak this code from a previous form I created but I'm getting a compile error message. On my old form...the first box was a combo list box where the person entering data would select a value. On the new form, its a text box where the person will enter the value. I thought I could just change the me.cbo[name].listindex to me.tbo[name].listindex - but that seems to be causing the issue. I'm not sure what I would put after the me.tbo[name]. to get the code to run...
Code:
Private Sub cmdAdd_Click()Dim lRow As LongDim lPart As LongDim ws As WorksheetSet ws = Worksheets("DataNEW")'find first empty row in databaselRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).RowlPart = Me.tboProdCode.ListIndex
I wrote a macro that basically adds 5 lines at the beginning and puts in a heading (don't want to use headers). The macro worked flawlessly, then i decided to add it to my add-in and now I get the compile error "type mismatch" for the following line
Range("A1").Select
- the "A1" is highlighted in particular.
Rows("1:5").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove Range("A1").Select ActiveCell.FormulaR1C1 = "1" With Selection.Font .Color = -16776961 .TintAndShade = 0 End With.............................
Can I Restrict Excel Data Form only for appending new record. (No deletion allowed) and also Can I save Data Form in the File? Is there any way, whenever we open the file Data Form should popup?
When I open attached excel file excel show message that," Compile error in hidden module in sheet 1". and file stop working. this error occur in only in Pc. How I remove this error.
I get this error : Compile error : Sub or Function not defined. I found out that this might be caused by the solver not being referenced. But, this is fixed now but I still get the same error message.
I'm using Excel 2007 - Windows.
Here is the code :
Sub Macro1() Dim i As Integer Dim j As Integer j = 4 For i = 1 To 4000 If ActiveSheet.Cell(i, 12).Value = 1 Then ActiveSheet.Cell(j, 15).Value = ActiveSheet.Cell(i, 2)
When I put form controls onto a spread sheet is there anywhere I can easily see and access its properties? Format Control is lacking many values and I do not see them in the vba project toolbar. I am trying to get checkbox locations and checkbox numbers if possible. If there isn't an easy place to see these is it still possible to get the checkbox locations in VBA?
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application ' ' do nothing for now 'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
Code: Private Sub Workbook_Open() Form1.Show End Sub
It has worked perfectly for about 2 weeks, well now when I go to open the workbook it gives me the debug error of Run Time error 424 Object Required. I last ran this today at about 8 a.m. no errors, but now about 4 hours later, it is bugging out. What is causing this?
This problem seemed to revolve around "digital signing" with further macro changes done from a different machine (without the proper certificate). Excel warns of the problem and then "unsigns" the project.
I've got a problem with spreadsheets that I've been working on. Now, when I tell it to record a macro, I get the macro name, shortcut assignment dialog box and then an error "Unable to record." After "Ok"ing that dialog box, the normal recording macro dialog comes up. Also, lo and behold, there will not be a macro recorded.
I've got no protected cells or sheets and it doesn't matter what security level is set. It is a "signed" macro but I can take off the signature and still have the problem. I checked for "Help - About" for deactivated modules and there was none.
I've taken some time to learn about building an excel data entry form. I'm looking to add a find button.
1) users would type in something in the ID text box, then click on "find". The code will then try to find that record in the worksheet(just sheet1).
when it is found, i want the forms to auto-populate values from that row.
right now, the search works except when you are trying to search a value that that is NOT in the worksheet. I'm getting an error message that i've never seen before.
VBA code to get userform input from form to "Data" worksheet. Data starts at columns A3..AG3. I need the code for the "Input" button to put Month, Date, Type, Comments under their corresponding columns and the "Amount" to go under the appropriate column that is selected by the Option Button. I've included a picture with in "red" comments.
once I get the pretty boxes and such, how do I link this form to a sheet to record data? How do I get it to run? I have tried searching the forum, but it seems that most of you already know that part and don't have any problems there.
I know this is probably very very basic and I will smack my face with my hand when you point it out. I just have never created forms with Excel before. I am used to using SalesLogix and when I create forms there, I have a database table that I can link each field to, so I keep looking for how to link to the table and I can't figure it out.
I am formatting a workbook so that the first table is a flat database of information used in other tables in the workbook. Each row in the tables would correspond to the values for a specific year thus,
I would like to have other tables reference this table and automatically update for the last record in the table so that the second table in the workbook would show,
year|weight|length 2007|28|147
My goal is to be able to go into the first table flat database tomorrow (Jan 1, 2009) and insert,
2008|29|110
in row below the 2007 data and then have the other tables in the workbook automatically update to reflect this new data and show
I would like to extract and compile the information contained in these cells: a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.
New sheet would contain the information of each sheet eg. Column A2= file name
And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.
VB: Sub MergeAllWorkbooks() Dim SummarySheet As Worksheet Dim FolderPath As String Dim NRow As Long Dim FileName As String Dim WorkBk As Workbook Dim SourceRange As Range
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
I am trying to set up a spreadsheet to record business costs, I have a column [A] and [B] with start times and finish times respectively. [C] is the shift length say 10 hours but I always get an error if its a night shift as the start time is invariably later than the finish time. Is there a way around this without inputting the dates into the cells as I am trying to not duplicate data entry.
VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
