In B16:T24 I have cells that need shading depending on what code I put in them. I have 5 codes P, BH, S, ML, HD
I would like the cells to change colour, when I put P in them I want them to change to blue, when I put BH in them I want them to change to green, S I want to change to red and so on.
I have a gantt chart that was built in excel. I need to shade cells in the timeline based on persons title under each project.
I can provide a snip of what the layout looks like for a better visual. I want the PM's Green, Supers Yellow and Persons Reporting Orange.
To get the green bar shown is using formula: =SEARCH("Project Management",$E17) , The issue with this is it fails to consider the start finish dates. For this particular project it works but when the formatting is "dragged down" the issue arises.
I have a spreadsheet where I want to be able to Fill cells green in Column B to Column N for any Rows that have a value in Column L. All other Rows should remain the current colour (orange).
I can Fill the cells in Column L using conditional formatting but am not sure if I can use Conditional Formatting on other Columns so that their Fill colour is determined by the value in Column L?
How do I make my cell shade a certain color? For example, green if >90%, yellow if >70% and red if
View 6 Replies View RelatedI'm trying to come up with vba code that will gray out a set of cells when a certain value is enter in another cell.
View 9 Replies View RelatedI am trying to find a formula for my grade book. What I want to be able to do is shade every cell that has a value of zero (but not empty cells) so that when I print out the grade book, I can easily see all missing assignments.
View 4 Replies View RelatedA little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
Using conditional formatting, I set the font color to Green for Cell G12
=IF( SUM(G12) > C28,SUM(G12),""). This worked. However I needed 6 conditions for this formatting. Excel only allows for 3 conditions. My VBA code is not working. Can someone tell me the correct code?
For cells "G12,O12,G23,O23" I want the font colors to change if their value is
1. greater than or equal to Cell C28 (change to green font)
2. greater than or equal to Cell C29 (change to orange font)
3. greater than or equal to Cell C30 (change to brown font)
4. greater than or equal to Cell D28 (change to green font)
5. greater than or equal to Cell D29 (change to orange font)
6. greater than or equal to Cell D30 (change to brown font)
It is set so that if a value is enter in C28, D28 will have a zero value. Can only use one or the other. Likewise if C29 has a value, D29 will be zero and cannot be used.
The code I used was:.............
I am fairly new to VBA and I am having some trouble with a VBA routine that was used in some workbooks I was given and I am trying to reuse that code.
What I am attempting to do is to shade the rows (alternate colors) whose value in Column C is the same until that value changes.
Example:
Row 1, 2 & 3 all have the same value in Column C so these would shade color 15
Row 4 thru 10 have a different value in Column C so those would have no shade
Row 11 thu 13 have a different value in Column C so these would then be Shade 15
So here is what I have done:
I set the range for the routine to step thru, then I defined the row & column to start processing. I then compare the current row to the row above. If the values are different then I compared the colors of the rows, and set the active row to the opposite color.
This routine runs but the first cell in each grouping isn't being shaded but then the rest of the rows are shaded correctly.
I have searched the web and look thru my code several times but to no avail, I cannot seem to understand why this will not work.
Code:
Sub grid_coloring()
Dim rwIndex, colindex, colindex2, ncount, bcount As Integer 'set rwindex, colIndex as an output number for columns. bcount and ncount are for counting blanks and dupes
Dim theRng As Range
Dim FirstRow, FirstCol, LastRow, LastCol As Integer
[Code] ..........
Please refer to attached file.
I have data in cell B2:K11
Each cell consist of 12 digits with 1 and 0.
I need to see if digit 1 can have one color font (yellow) and 0 can have other color font (light Orange).
(Either VB Code or Formula would work for me).
I have a workbook that requires a VB code to help me out with Conditional Formatting. I use Office 2003 which is restricted to 3 conditions, I know there is an add in I can use that would help me do this but other people may use this that wont have the add in. I have decided to use VB if possible to get this done.
I have a range of cells from B22 – T22 in these cells I will be putting codes, when these codes are put into the cells I would like the cells to shade a different colour depending on what code I use. Here is an example of what I mean.
P = blue
S = red
HL = green
ML = magenta
FL = orange
I may have a couple of more codes I will add at a latter time. Is it possible for VB code to do this?
I recorded some code and cleaned it up to apply a conditional format
Sub condi_format_I()
Dim wbBook As Workbook
Dim ws As Worksheet
Dim rng As Range
Set wbBook = ThisWorkbook
Set ws = wbBook.Worksheets("Summary")
Set rng = ws.Range("C4:P52")
With rng
.FormatConditions.Delete
.FormatConditions.Add xlExpression, Formula1:="=C4<0"
.FormatConditions(1).Interior.ColorIndex = 45
End With
End Sub
I would like to apply a custom color index to all cells in range C4:P52 if the value is less than zero.
But when I execute the macro, many cells receive the custom format that do notr match the custom format. Other cells that should receive the custom format do not
Is there a way to look at a cell's own value and then format it accordingly using VB?
I have a cell whose value changes based on DDE link to live price data.
Cell is "Q5".
When the new value is greater than the old value - i want to format the pattern color of the cell.
When the new value is less than the old value - i want to format the pattern color of the cell.
Does anyone know how to do this please or is there a way to do this using spreadsheet formulas as oppose to VB?
I have found this code while searching. I would like to know how to call the vba code only when clicking the button. On much bigger projects Excel has to re-calculate all cells everytime i change a cell value.
View 3 Replies View RelatedI am having a little trouble with this code, which runs in my simple but efective ressource overview. It loops through a rather large range and assigns interior colour to the cells based on certain criteria. On my stationary machine (Excel 2003) it takes approximately 15-30 seconds to run the code which is acceptable. On my laptop (Excel 2007) it takes 5+ minutes which is unacceptable. Is there a workaround so as to optimize the speed? Further, when I run this workbook on Excel 2007, even entering an integer in the sheet takes 3-4 seconds, and no code is running! In my first version I used a Change_Event to colour cells on the fly but this was slow and prevented multible cell editing as well as pasting values into the appropriate range.
Public Sub Farvelade()
Dim icolor, Navn As Integer
Dim TargetRow, LastRow, Previous As Long
Dim Target As Range
MsgBox "Det kan tage 15-30 sekunder at opdatere ressourcekalenderen"
Range("A5").Activate
Range("A5"). CurrentRegion.Select
'Set range
ActiveCell.Offset(Selection.Rows.Count, 0).Activate
LastRow = Cells(Cells.Rows.Count, "A").End(xlUp).Row.....................
I am working with a large report that needs to be broken out and sent as separate files to recipients for confidentiality purposes. I'd rather not use views/protection since there are many different ways particular people need to see the data, plus it is a very large file and flattening it works to everyone's advantage. My goal is a macro that will copy each tab into separate workbooks, paste special values, and save as each as Cell A1 (or the tab name-same thing). I have tried recording macros and editing (I'm very new to VBA) many times but it's a mess.
View 2 Replies View Related In the attached example, you will find column C which has a bunch of qualitative results. Also, in the file or worksheets, you will find Table A which has a color code range.
I would like to have a conditional format down column C that will reference Table A, regardless if it's on in the same worksheet or on another worksheet within the same file?
Using Excel 2013
I am trying to add something to a spreadsheet. I want to do some Conditional Formatting but I am not certain on what the formula would be to accomplish it. I am putting the Cond Format in cell E5 and I need a formula to say: IF F5 AND G5 are BLANK then do the format I set up which is simply to fill the cell with RED. (.ColorIndex = 3)
The next portion of my problem is I need to revise my VBA Coding to check and make sure that there is not any cells in Column E that have the Formatting Active. This is the portion of code I need to alter. I have changed the wording of the message but am not sure on how to change the IF statement:
'Checks to see make sure there are no Actions or Resolutions WITHOUT a Topic
If Sheets("Meeting Minutes").Range("C1").Value = "" Then 'NEEDS TO CHANGE
MsgBox "Oops! You forgot to enter a Topic for Discussion in a cell(s). You MUST have a Topic in order for your Meeting Minutes to transfer to the Master sheet." & vbCr & vbCr & "Please click OK to return to the Minutes sheet so that you may fill in the Topic(s).", vbOKOnly, "CAUTION! PLEASE Note!"
Range("D5").Select
Application.ScreenUpdating = True
Application.StatusBar = ""
Exit Sub
End If
I've adjusted a jonmo code to add an item in col B which is not in col A to the bottom of col A. - fab code, thanks jonmo.
But.. i want to:
insert rows beneath those in column A to accommodate the added items and shade those cells in list A once they been added ( so the users now they've been moved )
I've posted the code below ( including my attempts at colour change where it shade the right cell but in the wrong column ) ...
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
Is there a way to set up a conditional format for several cells so that the cells are filled in with red until the user enters text in those cells??
View 5 Replies View RelatedWhat I am looking to do is;
If cell A2 = "Closed"
then I want cells B2 and C2 to strike through its own text.
I.E.
A2= anything other than "Closed"
then B2 and C2 = Blah blah blah
but if
A2 = Closed
then B2 and C2 = Blah blah blah
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
conditional formatting.xlsx
Any time that any data is entered into one of the cells within my spreadsheet I would like the cell in which data is entered (and only the cell in which data is entered) to automatically become shaded (gray, preferably). I know conditional formatting should be used, but beyond that, I have no clue what to do. I would also prefer not to have to enter in conditional formatting formulas into all 105 cells, but I will do it if necessary.
Just in case, here's a little more information on what I am doing: I will be sending this spreadsheet out to about 10 others, and when they enter their name on a particular day at a particular time, I want that cell to become shaded. Other people might also enter their names at that day and time as well, so I would want the cell to stay shaded if that happens. Macros are not an option, because of security reasons.
I am trying to create an event that would shade certain cells if a cell is active.
For example if the active cell is cell J39, shade the following rows as follows:
I need to add a Macro/VBA script to a spreadsheet i'm working on which will shade all cells, within a workbook, if the cell contains a formula (eg: =sum(A1:A5))
I can't get it to work under conditional formatting, nor with my limited knowledge of VBA.
I want to add some colour conditional formatting to the cells in column C, dependent on their variance to the figure in column B. I've got the basic gist of applying the rule to the one single cell, but I'm not sure how to apply it to all the cells in the column. I have tried "dragging" it down, but it then just gives me the variance to the original row.
View 2 Replies View Relatedi want to know is there any way to set up conditional format to the cells used in a formula which is in another cell.
View 8 Replies View RelatedI'm using conditional formatting where one column of cells is referencing another column of cells. For example, I want cell K2 to highlight if the date entered doesn't match the date in F2. I then want cell K3 to highlight if the date entered doesn't match the date in F3. I want cell K4 to highlight if the date entered doesn't match the date in F4 and so on. I'm not having any issue putting conditional formatting on the cells/row references individually, but when I try to copy the formatting (by using format painter) to save time all of the cells in column K just reference the first cell in column F since the first cell in column K references that F cell but not any other F cell. How do I copy these row by row references between columns so that each reference is unique?
View 1 Replies View Related