Is there a formula possible where by the below table gets the second row deleted
because Col. C has 2nd row with value of 0. This way all the rows with value of 0 in coloum C get deleted and rows move up.
Col.A Col.B Col.C
12 CX2 1
14 CX6 0
16 CX4 5
In column J of my Excel 2003 worksheet named: Sheet1, is a list of mailing addresses.
I need a macro please to delete the entire row if any of the following conditions occurs:
1. The cell is blank or
2. The cell contains the works: No Address, BUNGENDORE, NSW 1111
Please note that the words: "No Address, BUNGENDORE, NSW 1111" may appear in either Upper-case, Lower-case or Proper-case.
I have attached a sample copy of my spreadsheet and highlighted in yellow the cells that meet the above-mentioned criteria.
As such, the entire rows: 4 and 11 of my sample spreadsheet would need to be deleted.
Im having some issues with some code Im working on. My goal is to delete the rows that do not have conditions met. Conditional formatting is used in 6 columns of my spreadsheet and the cell fill is to turn red when below .50 . This code is shown below. What I need to do now is look at the 6 columns where the conditions are applied, and delete any rows where the column cells are not red. To further clarify, if in row 1 column X:X does not meet criteria, but column AL:AL does, the row would not be deleted. However if none of the columns meet the criteria, the entire row is deleted.
View 6 Replies View RelatedWondering if there's a macro that can do this when i press a button.
In spreadsheet "Complete Backlog"Autofilter onShow rows where WIP Status (Column K) equals "Closed"Cut rowsPaste into next available row of "Closed Jobs" spreadsheet. No overwrites.
Or you could switch step 5 and 6 so that the rows are copied over to "Closed Jobs" and then deleted from "Complete Backlog".
I have the macro below that I want to use to conditionally delete all columns where the first row of each column does NOT have the following values but it seems to be deleting most of these columns as well all the others.
Fellow Excellor
Sub Deletecolums_Conditional()
Application.ScreenUpdating = False
[Code]....
I have a worksheet that I use Conditional Formatting to check the dates in a total of 5 columns. In those columns, if the date is before 8/1/2006, it changes the cell color to red. Is there a formula I can put into Condition 2 to that would then clear out the whole row if within those 5 columns there isn't a red cell? This would take hours of work off of my slab.
******** ******************** ************************************************************************>Microsoft Excel - Credetnialing Master.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutAT1=
ATAUAVAWAXAYAZBA1LicenseExpirationInsuranceExpirationDEA_ExpirationStateStateDrugNumberStateDrugExpirationAttestationDateNPDB_Date212/31/20078/2/20071/31/2009*229312/31/20073/7/20073/26/2007312/31/20075/1/20082/28/2010*253812/31/20077/6/20067/24/2006412/31/20078/26/200712/31/2007*256312/31/200712/12/200612/14/2006512/31/200710/19/200712/31/2009*276812/31/200711/28/200412/8/2004612/31/20079/25/20078/31/2007*303012/31/20074/6/20064/17/2006712/31/200712/3/20077/31/2009*315212/31/20075/3/20055/11/2005812/31/20078/2/20078/31/2008*323612/31/20072/28/20073/26/20079**10/31/2009****7/7/20031012/31/20078/10/20073/31/2008*353512/31/20074/11/20064/24/20061112/31/20072/1/20083/31/2009*365012/31/20
.........................
In column A, is a timeline - based on every 15 minutes.
In column H, I use conditional formula to change the cell color of any cell equal to or greater than the value of 00:00:07.
I would like to delete all other rows in column H that is under 7 seconds.
I would like the rest of the worksheet to stay in tact - so I can see the timeline. (or at least column A)
I have tried several macros and vba codes, and it either deletes all the rows or simply does not work with my worksheet.
I am unable to attach a worksheet, but I copy/pasted a simple view. This continues down the page, until 24 hours is complete.
Where 00:00:00 is, I am looking for anything over/equal to 00:00:07 - then delete the rest. The cells are formatted as 'general'.
ive got the following code looking to delete the entire row that contains cell H with a red interior fill (colour index 3). it has been coloured using a conditional format rule. When I run the code it deletes all rows?
Sub DeleteIfRed ()
Dim LastRow As Long
Dim i As Long
[Code]....
After red filling certain cells based on some conditional formatting, I apply a filter to hide them. Now I need to delete them using a macro script.
View 9 Replies View RelatedI have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Having trouble changing this formula from its current Median to a Quartile or Percentile. The median formula looks like this:
(MEDIAN(IF(DATA!$B$15:$DZ$15=1000,DATA!$B26:$DZ26))) and works perfect.
However I can't figure out how to manipulate it into a percentile keeping the condition of
IF(DATA!$B$15:$DZ$15=1000)
I would like a macro to find the columns named "apple" and "peach" and delete them. These would always be in row 1 but would always be in different column letters which is why I want the macro to simply find these columns by their name and not by their column letter.
And yes, I do mean the entire column altogether, shifting entire columns to the left. Wipe it off the face of the earth
1. Remove J,K,N,A Columns,
2. In the last O (TIMESTAMP) column, the date is 14-Jul-09 format change it to 07/14/2009 (this format mm/dd/yyy
3.Filter L column (VAL_INLAKH) Remove all rows from whole sheet which has 0 value
4. Column C (EXPIRY_DT) date format is 24-Sep-09 , "dd-Sep-09" change to "Sep" only
5.Merge Column B,C,D,E (SYMBOL.EXPIRY_DT.STRIKE_PR.OPTION_TYP
respectively )
I have an formula if statement that returns "deletethisrow" if the test is true.
For every occurence of "deletethisrow" I want to delete the row. The number instances will be variable each time I run the file. So maybe it will find that string, maybe it will find 10 instances. I want to do some kind of loop that won't error out when it cannot find "deletethisrow", but will delete the rows for each instance where it does find this string.
I know it was verbose, but if I just do a loop for a fixed number of loops it will error out if it runs out of rows to delete.
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI have a list containing blocks of stock price values with each block representing a series of values at a given time e.g
1400 156
1400 99
1400 74
1400 86
1400 256
The number of entries may vary for each block but is never more than 60. the next block may be e.g.
14:05 15
14:05 42
etc
and down a very long list of around 65000 entries. I'm looking for a routine that will add up all the values in each block and calculate the total for that time block. I then need to fill in an adjacent column with the perecentage that each value is of the total. A completed block may look like;..............
Is there a limit on the number of rows and columns that can be deleted in a macro on Excel 2003? I am trying to create a macro that, amoung other things, delets 1119 rows and 54 columns. If I delete the columns first, the rows will not delete. If I delete the columns first, the rows will not delete.
View 12 Replies View RelatedI found this sample code that works from top to bottom of a spreadsheet. But I need something that will delete the first entry and keep the last entry. My data is sent from one spreadsheet to a Master and sometimes the details can be sent twice, if the responsible person forgets to enter one line of production. The criteria should be the first 5 Columns of the sheet.
Sub Dupe_Killer()
Dim str As String
Dim str2 As String
Dim c As Integer
Dim i As Integer
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Sheets("SAMPLE").Select
rw = Cells(2, 1).End(xlDown).Row
'Sort Data by Date, Location & Number
Range(Cells(1, 1), Cells(1, 14)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Sort Key1:=Cells(1, 1), Order1:=xlAscending, Key2:=Cells(1, 2) _
, Order2:=xlAscending, Key3:=Cells(1, 3), Order3:=xlAscending, Header:= _
xlYes, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ ....................................
I would like to delete the content only of every 5th row - I do not want to delete the row.
I have about 6000 4 line addresses in one column and between each address is the number 0. Need only to delete the 0.
I have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I want to delete a sheet in a macro but when I run the macro, I always get a message warning and I have to answer the msg box to delete the page. Below is the macro command I am using.
Sheets("Tel").Select
ActiveWindow.SelectedSheets.Delete
I have a dataset of annual values which I need to combine into an array. Each year's data is in a separate worksheet, and contains between 4000 and 6000 rows. I set up a master sheet listing all unique locations for the entire period of record, finally got over the tics and brain damage from that one, and put in a VLOOKUP function for each column to retreive that year's data (examples-
=VLOOKUP($A2,'1995_5580'!$A$2:$E$5581,5,FALSE) =VLOOKUP($A2,'2002_6052'!$A$2:$E$6053,5,FALSE)). Works great. I still need to get something other than #N/A for not found values, but I can figure that out. Checking the results, I discovered that a very small percentage of the locations have more than one entry. In order to make this matrix useful, I need to have a sum of all values that match a given location. VLOOKUP only gives me the first match.
Now, the problems- I can't post a workbook, because it's confidential data. I would really prefer to stick with functions and not macros, because a lot of macros seem to get picked off by the firewall (I'm working on a network drive). I've seen similar problems addressed here with PivotTable (won't work here because a large number of locations are missing in one or more years and each year has a different number of data rows) and array formulas (data is on 23 separate worksheets). I really, really don't want to go through 100K+ rows of data to manually find duplicates and enter them into the master sheet. Not only would it short out my few remaining brain cells, it's inelegant.
how to view changes on my spreadsheet.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
I have to determine based on average number of weeks on hand whether an Item is Overstock, Obsolete, or Normal. I've got that taken care of with some If statements (I'm sure there's a cleaner way to do this but I've not figured that out yet.)
But I need my if statements to be conditional to whether or not an item is seasonal. with 10,000 active SKU's Its a little bit much to manage those in my excel copy of the item table so I wanted to make an exclusion table where I could just key the item in and the months it would be considered active in stock. This needs to go into the If statement on the items table that looks at the current date and says if it's less than six months old it's a "new item" but if it's six months and a day then it's a normal item, then ignore both if it's seasonal and just be a seasonal item if it is on the exclusion worksheet.
I'm attaching this incase anyone can offer any ideas. It would be much appreciated. I had to delete a ton off of the spread sheet to get it to upload, and the data is dummied to keep company inventory confiential.
I have this spreadsheet I'm making for Christmas to keep track of my wifes and my purchases. I'm having problem with a formula tho and I'm not sure how to go about this. Basically I have a "name" column. As you will see. At the bottom I have "total spent on cristina" "total spent on jon"
I need like an "IF" condition that will look at that name column and say, "if name is Jon" add up the amounts in the "total cost" column according to what Jon spent. If name is cristina, add up her amounts.
In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
How can I summate cells in a column *except* for those rows which contain a specific value in another column?
=SUM(A1:A10 where B<row num> !="SOLD"). I'm trying to add up the weights of items which are not yet sold.
Ok ive been playing about with excel for the past week to get a spreadsheep up and running so i can see the totals of some things and now its getting a little complecated for me (ive done the easy stuff lol)
Ok here is the situation and i'll try and explain what im doing as best as i can. Im trying to make a spreadsheet that shows how much a resorce can be refined so lets say in a1 to c1 i have 400 in each but i can mix a with b and b with c at the ratio of every 20 of a and c to ever 10 of b
so somewhere in my spread sheet id have the result 20 and 20 as products ato c can make 20 of product d and e i hope that makes sence?
for every 20 + 10 of a(400)+b(400) = 20
and for every 20 + 10 of c(400)+b(400) = 20
so if i had 600 300 600 instead of 400 i can only make 30 of product d of e (id have to choose)
I have a spreadsheet with days of week and places saved as text values, and I need to get averages for specific items,
for example,
Day of week in A1, place in A2, number in A3
I want to get in A4 say, the average of the numbers for all sundays at cambridge.
Any ideas how I could do this?