I am trying to find the slope of column F when Column C is between 4.5-5.5. I can do this by doing four seperate lookup formulas and having the slope function referring to the results. When I try to combine the four cells into a single cell Excel gives me an error. =slope((LOOKUP(5.5,XPos,XPsi),LOOKUP(5.5,XPos,Xpos)),(LOOKUP(4.5,XPos,XPsi),LOOKUP(4.5,XPos,XPos)))
Attached is an example of the data, the functioning slope when spread over four cells, and my attempt at combining the formulas(currently with an ' at the beginning to prevent the error)
1) I have column labels, and row labels on one worksheet which I input into a function.
2) These inputs should be matched with column and row labels, and then input into the index function to get a certain cell - let's call it the event cell.
I'm ok with this part. Then:
3) I would like to collect a one column array. The number of cells in this array should depend on an input from a cell in the worksheet, and the final cell in the array should be the column label of the column where I am inputing the formula.
4) The array from 3) should go into the slope function.
5) Then I want to get the second array for the slope function from a fixed column, but the same rows as in the variable first array, and this should input into the function.
I need to calculate the INTERCEPT and SLOPE of following daily stock prices, but 60 days before the announcement days. Its for my dissertation and Its the first time i have to work with that much data. Event study.jpgEvent.xlsx
I have more than 1000000 coordinates with heights to sort through. The aim is to be able to give a specific radius and check all coordinates within this radius if the slope is more than a maximum slope. If this is the case it need to put the value (in this case) 100 in a new column. The reason for this is we have a reasonable flat terrain but the entire area is filled with Anthills. I need to sort the data. Normal ground points (No Anthills) should be labelled/coded as 200 and anthills as 100. This will allow my program to know the difference between the ground and anthills. In the tab "Input Sheet" I have a small portion of co-ordinates starting from row 8 to row 53 (this will have to extend all the way down to the last row in excel). I need to copy each row starting with row 8 (C8:E8) and paste it in row 2 (C2:E2). Column H indicates if the points are forming an anthill and the code needs to change. I have my final answer in the tab "Final Answer" that I require for my program. Is there any way I can write a VBA code that will check all the point instead of doing it manually.
I was looking to use the VBA conditional formatting script posted on OzGrid and was curious if it would be easy to make some slight modifications.
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer If Not Intersect(Target, Range("A1:A10")) Is Nothing Then Select Case Target Case 1 To 5 icolor = 6 Case 6 To 10 icolor = 12 Case 11 To 15 icolor = 7 Case 16 To 20 ..........................
I can see that Case is the number range referenced to change the background...However, would it be possible to have it read a cells value as the criteria for the color change? Currently, I would like it to reference values in range I2:M2 and anything matching those cells in range A4:E28 change background to icolor = 30. I'm just not sure what to replace Case with to make it refence cells I2:M2
I have a list of names that belong to a particular group. What I want is to conditional format a sheet so that if a name is entered that does not belong to the group it is highlighted red. Don't really know how to do this though?
I have a spreadsheet that has a table listing employee names in the far left hand column (A1, B1, C1, etc.). The table has a simple border - black line throughout.
I need the entire row for the employee to change to no border if the employee's name is deleted.
I am trying to figure out How many 3rd grade, 4th grade, 5th graders there will be for each week. I will need a formula to fill in for each blank cell below.
# of 3rd# of 4th# of 5thWeek 1Week 2Week 3
I think I need a formula that would "read" something like: if "Week" is equal to "1, 2, or 3" then within the rows that contain that week, count all "Grade" that are equal to "3, 4, or 5"
I tried sumif, counta, if, and combinations of them, but I am not sure I am using them correctly.
I am writing this application wants me to calculate running averages and Std Dev. I will copy a row of values into a spreadsheet. The next row will be a new average of each column. So far so good. But the next time I calculate the new average of the column, I do not want to count the row that represents the last average I measured. SO, I'd like to format the rows that are average values (i.e. bold) and then when I calculate the next average, exclude any value whose font is bold. Currently I am using the following line of code to calculate average:
Is there an easy way to limit the values used to calculate average to only those values that are NOT bold?
Sub ColAve () Cells(LastRow + 1, ActiveCell.Column).Value = WorksheetFunction.Average(ActiveCell.EntireColumn) End Sub
I have a sheet called Quote Summary and a sheet called AssemblyBoms.
In the Bom sheet, I have a named range for QtyPer and a named range for unit price because these ranges are dynamic.
On the quote summary sheet, I want to format the cell (A9 and eventually A9 to A28 and so on), which contains a formula right now that only references a tag and does some equivalence checking
(=IF(AND(QSA>0,QSA=qty1a),assembly1,"")),
to have a yellow background if QtyPer>0 but unit price = "" or 0. I know the formulas for this, but it is not formatting anything. Attached workbook below.
QUOTETEMPLATEMACROTEST.xlsm
Conditional Formula for true: ="AND(qtyper1 > 0, unita1 = "")"
I typed it in without the = or "", but the formatting added those in for me.
I typed a number in the qtyper1 range and left the unita1 range blank to test it and no formatting has occurred.
I have a column of dates in column M, and in A1 I have the formula =TODAY() for today's date. I would like to conditionally format all of column M (up to row 198) so that it turns orange if the date in M is before today and after or equal to 3 working days before the date in M.
I have this =AND($A$1<M2,$A$1>=(WORKDAY(M2,-3))) But it doesn't appear to be working because it's highlighting dates after todays date.
Have a spreadsheet using the following conditional format to color highlight every other row: =MOD(ROW(),2)=1. Is there a way to apply this conditional format to all columns A through AR and all rows 1 through 24000 only?
If cell A1 matches a range (lets call it B5:K5) then"T2", otherwise return the actual value of B1. I know it shouldn't be that hard, but I'm a bit blocked.
I'd like my conditional formatting to format the range of cells red if the range K2:S2>H2. That is when the range K2:S2 are added together, and if their sum is greater than H2, format cells K2:S2 red.
I have a Conditional Formatting query where in essence I am needing to ‘make invisible’ a range of data by changing the font and background fill to white (and at the same time nullifying the effects of a number of other Conditional Formats). On the surface, this seems an easy thing to achieve, but the problem is, the range I need to apply this CF is a moving range and is dependant on a user changeable date.
Description of worksheet:
The sheet is managing shifts worked over 1 year by 21 people. The top 33 rows are a frozen (and collapsing) display area below which is a matrix of 365 days down and 21 people across. The TODAY button uses a macro to scan the dates and display todays entry directly beneath the freeze line of row 33. The date in M28 can be entered manually and after hitting enter, that dates data is now displayed under the freeze line. Also, using the spin button will increment or decrement the date in M28 moving the entire matrix up or down.
My query..........
What I’m hoping to achieve, is to display ONLY the data selected by the date in M28 (ie that shown under the freeze line, and for all remaining rows to be ‘whited out’, but as the user increments/decrements M28, then the “whiteout” range also needs to increment/decrement. I have whited out a second worksheet “example” as if I had selected 18 Jan (this sheet will not move as there are no buttons, but the data is still there under the whiteout).
I hope this is not TOO unclear, but I would be grateful if anyone could suggest a solution or even tell me if this is not possible – or indeed any other way of achieving the same result ( I had thought of hiding the rows below the freeze line, but the freeze/unfreeze operation would probably be too jerky.
What I am trying to do, is apply conditional formatting to a range of cells (for example, A2:J2) based on whether the data in one of the cells (D2) contains "Yes" or "No". I would like the entire range of cells to be one color if D2 contains "Yes", and another color if D2 contains "No". If needed, this can be split into 2 different conditional formatting rules.
I am trying to use conditional formatting to basically unhide a named range when a specific text is input into a range of cells from C23:C32. I have taken the named range "Screw_Test" and changed the formatting to make it hidden. White text on white background, that sort of thing. What I would like is to change the background color and text color back to something visible when the following is met. In C23:C32 I have a drop down. When Pedicle screw is picked in any of the afore mentioned cells, it would trigger the conditional formatting that would change the "Screw_Test" range (D22:F32) as a whole, making it visible. I haven't had much luck.
I have two columns of data (of varying length). The first column "A" has steadily increasing random values from about zero to 200. I would like to be able to automatically select/highlight the region with values between 50 and 100 as well the corresponding values in the adjacent "B" column.
I recorded a macro in which I applied a conditional format to a range (the selection).But, when i replay this macro, the conditional format is only applied to the first cell in the range. This can be seen in the "Manage Rules" dialog of Conditional formatting, where the "applies to" column shows only one cell, even though a range of cells was selected by the code.
I set a breakpoint at the first line of code here, and confirmed that the selection is correct, and indeed it is, as in the immediate window, ?Selection.Address correctly gives "$O$6:$O$21".
why the conditional format ends up only applied to cell O6 after the code runs?
"How can i apply a conditional format to a range of multiple cells, based on an expression, using VBA?"
Note that my range is within a PivotTable (but still, this works fine in the UI when i record the macro and the conditional format is correctly applied to the entire selected range).
The table above will vary in row numbers every month so I would like to use dynamic range. I will be calculating total downtimes for each configuration item every month and would like those totals reflected on a separate Excel sheet. .
I have a range of data on sheet1 say A1:A10 with random letters in each cell. On sheet2, I also have random letters and number in column A. What am trying to do is find a formula which if any of the data on sheet1 can be found in say A1 of sheet2 then shade the cell a given colour or if formula in B2 then show True otherwise false if not found. then do the same for the remainder of the cells on sheet2 which am assuming will be to just copy the formula in B1 of sheet2 or the conditional format in A1 whichever comes first.
Currently trying to calculate the cumulative performance for a range of months. For example, I have the below figures:
Jul-12 6.59%
Aug-12 1.13%
Sep-12 2.61%
Oct-12 -3.56%
[code].....
I want to create a product if function where if I'm looking back 6, 12, 18 months etc from a specified month (e.g. Sep 2013), it will calculate the product for the range of % (e.g. Apr-Sep for 6 months, Oct 12-Sep 13 for 12 months, etc...). I would imagine it will be =product(1+if(Column A range=6, Column B range))-1.
I am wondering if there is a quicker way to set up conditional formatting for a range of cells. In my projects, I have a range of cells N7:U16, where each row (7-16) would need to have a cell formatted based on a value in the cell adjacent to the range. I.e. the cell in range for row N7:U7 needs to be formatted based on the value in V7, and so on down for for rows 7 thru 16. Said another way, if the cell in the row range between n7:u7 = v7, then the cell in the range is uniquely formatted.
But I want to apply this logic all at once, instead of having to conditional format each row individual. The trick is that the cell with the value that I am comparing to is variable (i.e. V7:V16), but does correspond with the row I am comparing it to.
I need a formula to use with conditional formatting that "lights up" the corresponding cells. So, in this case cells A7, A27, E3... should "light up". Is this possible, or should I use VB?
conditional formatting a range of cells where i need more than 3 conditions, so please see below and can anyone kindly construct some vba code for me to do this (And if you have time to explain how it works so i have a good understanding of this)
Range R6 to R299 contains delivery dates Range AO6 to AO299 is = to the corresponding cells in Range R but formatted to show the Day
Cell AL1 contains a date which changes on a Thursday to show the following week commencing date.
What i am after is code so that Range AO6 to AO299 changes cell colour to the following criteria
less than AL1 (White) Is between AL1 & AL1+7 (Blue) Is between AL1+7 & AL1+14 (Green) Is between AL1+14 & AL1+21 (Yellow) Is between AL1+21 & AL1+28 (Pink)
I've been trying to get around the 3 rule limit for conditional formatting, and I've found the code I need on the site
[url]
I've changed it to suit my needs
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer If Not Intersect(Target, Range("A1:A2000")) Is Nothing Then Select Case Target Case Is = "Test" icolor = 6 Case Is = "Test2" icolor = 12 Case Is = "Test3" icolor = 7 Case Is = "Test4" icolor = 53 Case Is = "Test5" icolor = 15 Case Is = "Test6" icolor = 42 Case Else End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
This works great for one cell, but I need to format a row range based on the single cell. So if Test is entered into A1, then it changes to yellow, I also need the next 6 cells on the row to change too- In this case [B1:G1].
But it needs to cover the range in the code A1:A2000
I want to gray out a row of cells (B11:M11) when "x" is entered in cell M11. Suggestions for using Conditional Formatting or a formula would be great. I have tried a couple of formulas but none work.
I have been trying to figure this out for days and have searched on all the postings and cannot find my answer. I am working off of two worksheets. Sheet #1 has 3 columns. Column A "Type of Bar", Column B "Type of Activation", Column C "Amount Spent". Column A has 2 drop down boxes, Pub & Nightclub. Column B has 2 drop down boxes, Sampling & Training. Sheet #2 is is a tracker that is going to add up certain criteria off of Sheet 1. For example, I need to get the sum of All Pubs and Sampling. I also need to track All Pubs and Training, Nightclub and Sampling and Nightclub and Training. I have tried the SUMIF, IF, and Conditional Sum. I keep running into a RANGE error.
