I have two columns of data (of varying length). The first column "A" has steadily increasing random values from about zero to 200. I would like to be able to automatically select/highlight the region with values between 50 and 100 as well the corresponding values in the adjacent "B" column.
View 4 RepliesTo initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI need to apply conditional formats a certain range e.g. I8:I1000. Every time my spreadsheet is loaded with new data, the previous cf are erased, and I have to start all over again.
View 7 Replies View RelatedI am receiving a 'subscript out of range' error on the lines of code below.
I would note that all variables are declared and all seem meaningful as regards what you would expect at that point.
Below is a snippet from the immediate window which indicates what the values are:
completecashname C:CashDevelopmentMyFolderoutputCASH042706.xls
cashsheetname Formatted Sheet
cashcurrcolumn A
cashfirstrow 2
cashlastrow 876
Also the workbooks are both closed at this point (but it makes no difference)
Set CashCopy = Workbooks(CompleteCashName).Sheets(CashSheetName). _
Range(CashCurrColumn & Cashfirstrow & ":K" & Cashlastrow).Value
Set PelPaste = Workbooks(completepelname).Sheets(PELSheetName). _
Range((PELCurrColumn & PELlastrow)).Value
What i'm trying to do is select a range based on the date which happens to be in the first column of the range.
For example, I have a column (A) that contains dates and column (B) that contains names.
Its easy enough to select the entire range using
Range("A1:B4").Select
I need someting that will analyse column A and conditionally selct the range based on the date in column A (ie. it will only select the rows where column A has todays date).
I know there is a simple answer for this, and I did a search but could not find what I am looking for. I am comparing two different workbooks. I loop through the first workbook (oldfile) and then find the corresponding value on the other file. I find the corresponding value using
With Worksheets(1). Range("b2:b" & blah)
Set c = .Find(MyVar, LookIn:=xlValues)
I know the cell address of the value that was found by
firstAddress = c.Address
Now I need to offset a few columns and copy the data. If the cell address was in R1C1 format then I could do this easliy by ActiveCell.Offset(Row, col + Offset).Copy
(where row and col are given from the c.address function. But I don't know the RC value since the c.address provides the value in "A1" format. I do not want to actually go to the cell and then do an offset and copy, since it is a large spreadseet and would be slow. I don't want to do a bunch of string manipulations (unless it easy). Is there a way to have c.address output it's values in R1C1 format? Or is there a different command I could use?
I have 2 comboboxes in the complett worksheets. By selecting some values in this comboboxes, I need some code that will copy automatically some data from worksheets a and b, to worksheet export.
For example if I select "a" and "A26" in the comboboxes, I need range E26:B26( 4 col to the right of A26) from "a" worksheet, to be copied with Paste Special /Values/ Transpose into "export" worksheet in range A1:A50. Also I need in range A51 from worksheet "export" the value "A26" selected in the second combobox. Also in range A52 from worksheet "export" the value from range H40 from "complett" worksheet.
I suspect this is extremely basic however how do I do the following in VBA? I have dataset with a column having a row of numbers as: 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, etc. What I want to do is copy some information designated by the first 1 then the first 2 then the first 3 to another worksheet leaving the other data. How do I selectively choose the first of the 1, 2 and 3 etc.
View 1 Replies View RelatedIs there a way to set up a cell so that when you click the cell, the cells value is automatically copied to the clipboard?
Example:
A1 = 1
A2 = 2
A3 = SUM(A1:A2)
Can you set up cell A3 so that when you pick it with your mouse, 3 is copied to the clipboard ready for you to paste elsewhere?
I have tried searching through the forum to find an answer but nothing has come up.
So in my code I have two set ranges and want to select from one set range to another. The code I have now does not work because I cannot select Range("POBRF:PO"). This is the code.
[CODE]
ARow = Range("A" & Rows.Count).End(xlUp).Row
Set POBRF = Range("A1:A" & ARow)
BRow = Range("I" & Rows.Count).End(xlUp).Row
Set PO = Range("I1:I" & BRow)
Range("POBRF:PO").Select
[CODE/]
I am having trouble selecting a range in my data to copy to another worksheet. I have declared two variables (startcell and endcell), as seen below, as strings:
Cells.Find(What:=startdate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
startcell = ActiveCell.Address
Cells.Find(What:=enddate, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
endcell = ActiveCell.Address
After this I would like VBA to copy all the variables in a range that is bounded by startcell and endcell. Here is what my code is currently for selecting the range:
Range("A2:" & endcell).Select
Instead of A2, I would like to select startcell, but I cannot figure out how. Currently I can get VBA to recognise endcell. For example, using the formula above I can copy the range from A2 to endcell. However, when I try and use startcell as the beginning of the range (in place of A2) the code does not work.
I have two tables in two different worksheets. In the first table, rows get deleted if the value in column 'S' (the first row to the right of the table) is not '1', and columns get deleted if the value in row '2' (third row above the table) is not '1'. In the second table, the number of columns stays always the same but rows get deleted if the value in column 'N' (first column to the right of the table) is not '1'.
After the rows and columns are deleted the tables get pasted in a ppt presentation.
Now the problem: I am a beginner in VBA and up til now I am only able to define a certain Range, e.g. ("A5:M17"), to be copied and pasted into ppt. But since the tables will sometimes be bigger than other times depending if rows/columns are deleted, I would rather define a dynamic Range. The top left cell of both tabels to be copied is always 'A5' but the bottom right cell changes.
I would like to create a spreadsheet where I enter a list of 30 40 names and associated data over 4 separate columns. I would like the option of having a check box next to each name so when checked, it copies that name and associated data in to a section below. This will give me a reduced list of names (lets say 20). From this section I would like the same again to reduce further and once more after that.
View 9 Replies View RelatedI have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
I am trying to select a range of numbers based on an active cell. I then want to sum those numbers and have that total reported to a specific cell.
For example:
Say I have a column with a list of dates (Jan/04 thru July/06). I want the user to be able to click on any given field and have that field plus the 11 fields above it summed and reported. Any help?
I came up with something like
ActiveCell.Resize(12, 1).Select
This only selects the data from the active cell and goes down...I need the opposite. I need it to select the 11 cells above the active cell (plus the active cell) and sum that data.
I have a spreadsheet with Employee details and each employee has a Indicator and a Score.
I'm battling to get Excel to do a lookup on the Indicator, find the applicable Score Range, see if the individual's Score falls within the range and then inserts the relevant % into a cell in a specific row of each employee.
If we did not have more than 2000 doing it manualy might have been an option. Also, the Percentages and Score Ranges in the matrix might change a couple of times....
I am having a few problems selecting a range. What I am trying to do is select a range where the number of columns stay the same, but the rows are variable; ranging from one row upwards. At the end of the rows, there is a blank row. I currently have;
View 2 Replies View RelatedI am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
I want to copy a range where the row is variable (i in the Loop I'm doing) but the columns stay the same. What am I doing wrong?
Workbooks("Labor Info").Sheets("Transfer").Range("A" & i & ":E" & i).Select
I was trying to select all of the pictures/objects in a certain range (A294:L1400) in order to move them all at the same time. How do I do this?
View 1 Replies View RelatedHow would I select a range using variables? For example, say I wanted to say
myRange = Sheets(1).Range("A1:A100"),
but the column was variable. How would I do this if the column number was stored in a variable?
I need to select starting with:.
Columns A-O
Rows 1 - ( LR of ColB - Col A is empty )
I'm trying to obtain a formula that allows me to select the last 20 numbers in a range of numbers that continue to increase weekly. i.e column a3-a3000 increases by one number every week. I need the formula to sum the lowest 10 numbers of the last 20. If there is 30 numbers from a13-a33 week one. I require the formula to pick up the 10 lowest from the last 20 (a13-a33). Week two the cell increases by on to a34. The formula would then have to pick up the lowest 10 from the last 20 (a14-a44) and so on.
View 9 Replies View RelatedI have attached a spreadsheet...I'm trying to select Range A1:N16 using VBA code...
Range(activecell,activecell.end(xltoright)).select
Range(selection,selection.end(xldown)).select
When I use this code is only gets A1:N6...: is there anyway to get it to select the range all the way to the end of the data. I tried CurrentRegion and some other stuff but can't get it to work.: The range may go upto line 500 or 3 I just never know.
I'm trying to select a discontinous range, lets say B2:B30 & D2:D30 and this works fine using the code below:
Range("B2:B30,D2:D30").Select
However if I use the code below, B2:D30 is selected including column C.
Dim LastRow As Integer
LastRow = Range("a65536").End(xlUp).row
Range("B2:B" & LastRow, "D2:D" & LastRow).Select
I'm trying to write a formatting macro that will insert a gray divider (row) into a blank line. I'm going to do this with a keyboard command, but I'm having a hard time selecting to column AJ. Obviously this command...
Range(Selection, Selection.End(xlToRight)).Select
...takes you to the end of the page, but I don't need to go that far, just to column AJ.
I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
View 1 Replies View RelatedI have part of this routine working correctly. It will go and find the value I need and move to the next column using the Offset method, but now what am I doing wrong to try and get the code to select to the end of the current column?
Sub Find_First()
Dim FindString As String
Dim rng As Range
'FindString = InputBox("Enter a Search value")
FindString = Worksheets("Template").Range("A26").value
If Trim(FindString) <> "" Then
With Sheets("Service Level Score Paste Sheet").Range("A:A")
Set rng = .find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
rng.Select...........................
I have a spreadsheet where I need to perform a calculation on the lowest 10 of the 20 most recent entries. Currently I am just deleting the oldest entry and putting in the new data but I now desire to keep all my data.
How do I select the new range of 20 rows and then tell it to take the 10 lowest values to perform the calculation
I have 2 worksheets where I need to transfer a certain amount of data from one to another depending on dates.
Sheet A, is the main data source. Col A holds all 365 dates from 1 Jan to 31 Dec(starting at A2), and the subsequent data for each day is held in cols B to P.
Sheet B is the destination where the user will specify a key date in cell A3, then in A4 to A32, formulae populate the next 29 dates (ie so there is a continuous run of 30 days).
What I need to do, is to identify the same 30 day range from sheet B on sheet A, then to copy the data in Cols B to P for that range back onto sheet B (pasting in at D3)