Copy Area And Paste As Image (Special Attribute)?
Apr 7, 2014
I have a conversion chart of decimals to fractions I made in Excel. I want to copy and paste as an image so I can shrink it to fit at the top with the frozen headings.
I tried to take a picture of it on the monitor, but the photo captures the screen fuzzy pixels.
I tried to copy and paste but could not find where I could paste as a special attribute. Or a picture on the internet with the decimal first and the fraction second in 1/16ths
View 3 Replies
ADVERTISEMENT
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Jun 8, 2009
I just want to find out what formula could make a function "copy paste special value"?
View 9 Replies
View Related
May 4, 2006
I have the following code in a macro which works fine. Is there a way to shorten the code down to 1 line?
Sheet2.Select
Range("C2:F2,H2:J2,N2,P2,R2,T2,W2,Y2,AA2").Select
Range("AA2").Activate
Selection.Copy
Sheet9.Select
Range("B3:O3").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I would like to use the code in a Select Case Statement & the above code is too cumbersome.
View 2 Replies
View Related
Jul 23, 2009
I am having problems with 1 of my macro's and I am at a loss as to why!
I anticipate there is a simple answer and I apologize in advance, but....
This line of code is no longer working
View 6 Replies
View Related
Sep 1, 2008
Im trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
View 9 Replies
View Related
Mar 7, 2009
Do anyone know that if excel can be copy and paste special value when some of the columns are filter? It seems that you can only do copy and paste special value when unfilter everything column.
View 9 Replies
View Related
Aug 4, 2009
This is a macro i have been using to update update information from one sheet to the next empty row in another sheet within the same workbook.
Sheet2.Unprotect Password:="Climber7c+"
With Sheets("FeedbackForm").Range("B7:N8")
.Copy Destination:=Sheets("Feedback & Performance").Range("A" & Rows.Count).End(xlUp).Offset(1)
.ClearContents
Sheet2.Protect Password:="Climber7c+"
The problem is i don't want to copy the formating, cell protection properties and comments, just the values with in the cells.
View 9 Replies
View Related
Aug 15, 2008
Currently I have a macro which successfully updates a value in the report page, creates a new document and then copies and pastes (as values)that sheet into the new workbook and saves it down as a unique file.
I need to have graphs on this new workbook. So gathered creating a template and getting the macro to open this template, copy the ranges and then paste into the template (which will update the charts) and then save down.
The ranges i need to paste in are: B5:D7, and B11:P37 the destination cells are exactly the same.
The current code i have is: ...
View 4 Replies
View Related
Jun 8, 2007
I am creating a simple IF function. that says IF cell (cell name) = 2007 then copy and special paste values from these cells into this location...I am not entirely sure how this should be set up.
View 2 Replies
View Related
Apr 30, 2008
I have a spreadsheet with 2 macros in it, one for copying cells and deleting contents/comments etc.
Selection.Copy
Selection.Interior.ColorIndex = xlNone
Selection.ClearContents
Selection.ClearComments
Application.CutCopyMode = True
and another to Paste Special (all except borders)
Selection.Select
Selection.PasteSpecial Paste:=xlPasteAllExceptBorders, _
Operation:=xlNone, SkipBlanks:=False, Transpose:=False
The first macro works fine but the second macro comes up with a runtime error '1004' Paste Special method of range class failed.
View 2 Replies
View Related
Jan 1, 2013
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
View 2 Replies
View Related
Aug 9, 2009
I created a macro that copies a range from one worksheet to another as shown below, which correctly copies everything including formulas.
View 9 Replies
View Related
Jan 4, 2012
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
Code that works:
Application.DisplayAlerts = False
Application.CutCopyMode = False
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] ........
Code doesn't work:
For Each DistrictCell In DistrictRange
Sheets("PerfCompDashDistrict").Range("c4") = DistrictCell
Calculate
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] .....
View 2 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Apr 8, 2014
I need to copy and paste transpose, some over 100 values, but I want to add a comma after each value, so they can be put into JD Edwards for running a report.
View 3 Replies
View Related
Feb 22, 2007
1. Alphabetize the worksheets that have a red tab color. The number of worksheets with a red tab color will vary from time to time.
2. All worksheets with a red tab color are formatted the same. I would like to copy the same range of cells (AP5:BP9) on all n number of worksheets with a red tab color to a worksheet labeled "Posting". Also, since AP5:BP9 are cells with formulas and formatting, the ranges need to be copied with formats and value and number formats. The first copied range needs to be on line 8 on the Posting worksheet, the second range to start on line 15, etc.
3. Last, but not really last, I would like to start the code with deleting whatever is currently on the Posting worksheet starting at line 8.
I have attached a small sample. The sample does not reference the same range as above on the worksheets with a red tab color, nor does it contain the formulas and formatting.
View 3 Replies
View Related
Jun 26, 2014
I'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
View 9 Replies
View Related
Mar 18, 2014
I use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
View 2 Replies
View Related
Mar 4, 2009
I have a workbook with many sheets in it. Within each sheet there is a cell with the Text "March 09" there are then 3 cells to the right of this cell with relevant information. Is there a Macro that can search for this text March 09, then copy this and the 3 cells to the right of it and paste special this information 1 cell below for all 4 cells.
View 2 Replies
View Related
Jan 25, 2012
Excel 2002.I have data in columns A and B on sheet 3, starting at row 100. The total number of rows of data is variable (max is 50 rows). I want to take the values in A100:B100 and copy them from Sheet3 and paste values transposed to SheetTL Range C1:C2. I have started to write the following code but as you can see I will have to repeat the code upwards of 50 times. It seems I should be able to do a COUNT function to see how many rows of data exist and then somehow loop the code to copy the data from each subsequent row that many times, but how to put that together.
Sheets("Sheet3").Range("A100:B100").Copy
Sheets("TL").Range("C1").PasteSpecial Paste:=xlPasteValues, Transpose:=True
ActiveSheet.PrintOut
If Sheets("Sheet3").Range("A101") = "" Then
[Code] .........
View 5 Replies
View Related
Jan 15, 2008
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
View 9 Replies
View Related
Jun 21, 2006
In the code below, I am copying information from a master sheet to various sub-sheets, but I cant figure out how, based on the way I have written my code, to copy and paste special values. I commented out the line that I need pasted special values.
Dim intData As Integer
Set wsData = Worksheets("Data")
LastRow = wsData. Range("A" & Rows.Count).End(xlUp).Row
Set wsCrit = Worksheets.Add
wsData.Range("E3:E" & LastRow). AdvancedFilter Action:=xlFilterCopy, CopyToRange:=wsCrit.Range("E3"), Unique:=True
LastRowCrit = wsCrit.Range("E" & Rows.Count).End(xlUp).Row
For I = 4 To LastRowCrit
Set wsNew = Worksheets.Add
wsNew.Name = wsCrit.Range("E" & I).Value
wsNew.Range("a3").Value = "Estimator"
wsNew.Range("a5").Value = "IP Number"
wsNew.Range("b5").Value = "Project Name" ......................
View 5 Replies
View Related
Jun 23, 2006
i would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...?
Sheets("Proposal").Copy After:=Sheets("Proposal")
'rename...
ActiveSheet. Name = "ProposalEmail"
ActiveSheet.Copy
ActiveSheet.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks _
:=False, Transpose:=False
View 2 Replies
View Related
Mar 8, 2007
I am trying to create a macro to copy multiple sheets to a single named worksheet, all within the same workbook. The code below works, except I want to copy only the data (no formulas). Can I add code to paste values, or do I need to start over?
Public Sub CopyandPaste()
Dim ws As Worksheet
Worksheets("Summary").UsedRange.Delete
For Each ws In Worksheets
If ws.Name <> "Summary" Then
ws.Range("a2"). CurrentRegion.Copy _
Destination:=Worksheets("Summary").Range("A65536").End(xlUp)
End If
Next ws
End Sub
View 4 Replies
View Related
Dec 20, 2007
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges()
Application.Goto Reference:="DataCopy30Yr"
Selection.Copy
Application.Goto Reference:="DataPaste30Yr"
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
End Sub
My attempt to consolidate was this:
Sub PasteRanges()
Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues)
End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
View 6 Replies
View Related
Aug 28, 2012
I need a macro which will copy an image from a folder location and paste it into a mail (outlook).
I don't want the image to be added as an attachment.
View 9 Replies
View Related
Dec 18, 2011
I am trying to create an operational dashboard and I have some List Boxes for which I am preparing the data. The Dashboard is separare worksheet and the calculations are done in several additional sheets. The results, based on the chosen values, are updated in the Dashboard sheet in an area starting with column AO and can be like $AO$4:$BR$37, then $CA$4:$DD$37, and so on: total 6 or seven areas.
I would like to paste one area at the time (with all formats, including font, values, borders, merged cells, etc.) into the “physical” dashboard – the visual area on the screen. I do not want to make this operation manually; shall be automatically.
View 4 Replies
View Related
